SAXOPHONE

ECONOMY FLUORESCENT LEAK LIGHT SYSTEM

The #8412 ECONOMY FLUORESCENT LEAK LIGHT SYSTEM includes one each of the items listed below. Desi...

The #8412 ECONOMY FLUORESCENT LEAK LIGHT SYSTEM includes one each of the items listed below. Designed to work on 110-120 volt power source. For 220-240 volt power source order our voltage converter. Includes one each of the following: #8090 Control Unit #8112 Fluorescent 12" Lamp with Cord & Plug

SAXOPHONE KEY CUP ALIGNMENT TOOL

This tool is designed for centering asaxophone key cup over the tone hole. The slot in the tool i...

This tool is designed for centering asaxophone key cup over the tone hole. The slot in the tool is positioned overthe key arm and sideward pressure is applied to move the key to left or right.Provides easy, accurate positioning of key cup without marring the key. Designed with a different width slot in each end of the tool to accomodate wide variety of key sizes.Precision machined from aircraft quality T6 aluminum.

ECONOMY INCANDESCENT LEAK LIGHT SYSTEM

Similar to the old Erick Brand leak lights, the #8410 Economy Leak Light System includes one each...

Similar to the old Erick Brand leak lights, the #8410 Economy Leak Light System includes one each of the items listed below. Designed to work on 110-120 volt power source. For 220-240 volt power source order our voltage converter. Includes one each of the following: #8012 Incandescent Control Unit #8222 Large Incandescent Lamp #8126 Large Incandescent Cord Plug #8221 Small Incandescent Lamp #8125 Small Incandescent Cord Plug

SHRINK TUBE / LAMP ENDS

This shrink tube is used to cover the pins and wire connections of the two ends of fluorescent tu...

This shrink tube is used to cover the pins and wire connections of the two ends of fluorescent tubes. Sold in pair.

DUCKBILL PLIERS - CURVED JAW

These duckbill pliers offer broad 5/8" (16mm) wide curved jaws to provide good support and contro...

These duckbill pliers offer broad 5/8" (16mm) wide curved jaws to provide good support and control for key straightening and adjustments. Contoured handle with cushioned grips.Dimensions: Jaw width: 0.625" (16mm) Jaw depth: 1.5" (38mm) Overall length: 6.5" (168mm)

LARGE CROOK & NECK DENT ROD - 90°

Works great for saxophone or alto/bass clarinet necks and large bore brass instrument slide crook...

Works great for saxophone or alto/bass clarinet necks and large bore brass instrument slide crooks.Precision built from non-corrosive stainless steel.Thread size: 3/8-16.Approximate overall length: 9-1/2" (24cm).Shaft diameter: 1/2" (12.7mm) tapering down to 1/4" (6.4mm).See our #2760 DENT ROD CLAMP or #2292 UNIVERSAL VISE JAWS for easy, secure mounting in a vise.Works well with the following dent balls or any dent ball with 3/8-16 thread size: #2476 FLAT SIDE DENT BALL SET OF 18 #2580 DENT B...

SAXOPHONE TONE HOLE FILE 1-1/4" (31.7mm)

1/8" (3.2mm) x 1-1/4" (31.7mm) x 5" (127mm) with standard 2" (51mm) tangoverall length: 7" (178m...

1/8" (3.2mm) x 1-1/4" (31.7mm) x 5" (127mm) with standard 2" (51mm) tangoverall length: 7" (178mm) file type: cross-cut cut grade: smooth safe edges (smooth, no teeth) minimizes damage to posts and guards

BLAZER MICRO TORCH - STANDARD

The Blazer® Micro Torch Standard is an excellent self-contained butane torch featuring precise fl...

The Blazer® Micro Torch Standard is an excellent self-contained butane torch featuring precise flame control and rugged design and construction. Turn adjustment knob (located on top) counter-clockwise to open gas valve and then press and release side button for quick Piezo self ignite. To shut off, turn adjustment knob clockwise. The adjustable flame length and flame intensity make this an excellent tool for all types of repairs including soft soldering, silver soldering / brazing, and pad wo...

CONTROL UNIT - INCANDESCENT

Our #8012 Leak Light Control Unit is designed to operate our complete selection of incandescent l...

Our #8012 Leak Light Control Unit is designed to operate our complete selection of incandescent lamps. Features include simultaneous operation of two incandescent lamps, sturdy aluminum chassis, front panel ON/OFF indicator lamp, and grounded power cord. Power requirements: 110-120 volt AC. For 220-240 volt application see our voltage convertor. Dimensions: length: 4.5" (114mm) width: 3.6" (92mm) height: 2.5" (63mm) Lamps and cords sold separately.

WIHA TORX DRIVERS

RECOMMENDED USE: screw type: key guard screws instrument: Selmer (and other) Saxophones Votaw ...

RECOMMENDED USE: screw type: key guard screws instrument: Selmer (and other) Saxophones Votaw Tool Company is pleased to offer the Wiha™ line of screw drivers. Blades are made of high alloy vanadium-molybdenum steel specially developed for Wiha™ and are salt-bath hardened and tempered to provide optimum hardness, maximum torque transfer and exceptional durability. Chrome plating assures protection against rust and corrosion.All Wiha™ handles are molded from durable, high impact black cellu...

INCANDESCENT LAMP - WEDGE STYLE BASE

Incandescent lamp with wedge style base for use on old style #8104 (discontinued) cord, plug, and...

Incandescent lamp with wedge style base for use on old style #8104 (discontinued) cord, plug, and jack. Rated 6.3 volt.

LAMPLOCKERS

Our Lamplockers are the perfect solution for keeping leak light lamps inposition while working on...

Our Lamplockers are the perfect solution for keeping leak light lamps inposition while working on the instrument and also prevent lamps from falling outof the instrument onto the floor.Made from safe, non-marring rubber, Lamplockers areslotted to easily slip over the lamp cord and are then insert into the neckreceiver or bore of the instrument. The hole through the center of theLamplocker is large enough to allow the cord to easily slide through it forrepositioning of lamp yet provides enough...