{"title":"All","description":null,"products":[{"product_id":"val-gb-110-piccolo-pad-12-5mm","title":"VAL GB .110 PICCOLO PAD 12.5mm","description":"VAL GB .110 PICCOLO PAD 12.5mm","brand":"Valentino 1","offers":[{"title":"Default Title","offer_id":34467082174599,"sku":"4745 12.5","price":1.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/4712ARC_61d67d00-947c-4a1d-8ac5-da752fe9ae45.jpg?v=1594672254"},{"product_id":"trombone-leveling-block","title":"TROMBONE LEVELING BLOCK","description":"\u003cp\u003eDesigned for aligning both inner and outer slide\u003cbr\u003epipes, our #2076 Leveling Block is constructed using heavy plate glass enclosed\u003cbr\u003ein a wood case. Two steel riser blocks machined perfectly flat set on either end\u003cbr\u003eof the glass. Slide pipes are set on the riser blocks to determine skew or\u003cbr\u003etwist.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003eWorks great for soldering and reassemby work. When\u003cbr\u003esoldering, simply position the area receiving the heat off of either end of the\u003cbr\u003eblock. To help hold pipes in place when soldering order our #2078 TROMBONE SLIDE ASSEMBLY MAGNETS.\u003c\/p\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eDIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eoverall length: 30\" (76cm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eoverall width: 8.75\" (22cm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eoverall height (with risers): 2\" (5.1cm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eglass length: 28\" (71cm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eglass width: 6-3\/4\" (17.1cm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eglass thickness: 0.25\" (6.35mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e\u003cb\u003ePLEASE NOTE\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eGranite blocks that are sold for doing\u003cbr\u003ehandslide work are designed to check pipes for straightness, alignment, and to\u003cbr\u003eaid in reassembly. While granite provides a flat surface, it is quite costly as\u003cbr\u003ewell as heavy and cumbersome. To perform these same procedures we offer our \u003cb\u003e#2075\u003cbr\u003eStraight Edge\u003c\/b\u003e and \u003cb\u003e#2076 Leveling Block\u003c\/b\u003e.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003eLight weight and machined perfectly flat,\u003cbr\u003eour Straight Edge is designed to check pipe straightness and is easy to position\u003cbr\u003eat eye level by clamping in a standard bench vise. Our Leveling Block works\u003cbr\u003egreat for alignment and assembly work and can be easily stored away when not in\u003cbr\u003euse.\u003c\/p\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493852909703,"sku":"2076","price":196.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2076Bcrz.jpg?v=1595524389"},{"product_id":"trombone-handslide-mandrel-set-of-12-standard-sizes-1-thru-12-save-10","title":"TROMBONE HANDSLIDE MANDREL SET OF 12 STANDARD SIZES (#1 THRU #12) *** Save 10% *** Price reflects discount","description":"\u003cp\u003eMade from precision ground drill rod, each\u003cbr\u003efinely polished mandrel holds a diameter and roundness tolerance of\u003cbr\u003e±.0005\" - qualities that far surpass rods made from ordinary carbon\u003cbr\u003esteel.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe mandrel has a full radius machined and polished\u003cbr\u003einto one end to prevent snagging while inserting into badly dented slide pipes\u003cbr\u003eand to prevent putting ridges in the crook area. The mandrel's other end is number indexed for easy\u003cbr\u003eidentification.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eOverall mandrel length is 36\" (91cm).\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eStorage rack sold separately\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493852942471,"sku":"2080","price":1031.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2080Cz.jpg?v=1595524393"},{"product_id":"trombone-handslide-mandrel-0-4375-11-11mm-standard-2","title":"TROMBONE HANDSLIDE MANDREL 0.4375\" (11.11mm) STANDARD #2","description":"TROMBONE HANDSLIDE MANDREL 0.4375\" (11.11mm) STANDARD #2","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493853008007,"sku":"2080B","price":89.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2080A_c60def01-62d0-453c-bf10-3f6542c0f98e.jpg?v=1595524395"},{"product_id":"trombone-handslide-mandrel-0-4688-11-91mm-standard-size-4","title":"TROMBONE HANDSLIDE MANDREL 0.4688\" (11.91mm) STANDARD SIZE #4","description":"TROMBONE HANDSLIDE MANDREL 0.4688\" (11.91mm) STANDARD #4","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493853073543,"sku":"2080D","price":89.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2080A_f604668c-56b8-452f-8c46-798d49ad3915.jpg?v=1595524397"},{"product_id":"trombone-handslide-mandrel-0-5000-12-70mm-standard-size-6","title":"TROMBONE HANDSLIDE MANDREL 0.5000\" (12.70mm) STANDARD SIZE #6","description":"TROMBONE HANDSLIDE MANDREL 0.5000\" (12.70mm) STANDARD #6","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493853204615,"sku":"2080F","price":99.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2080A_09e133c1-12ab-436b-8fcd-509271401d18.jpg?v=1595524399"},{"product_id":"trombone-handslide-mandrel-0-5313-13-49mm-standard-size-8","title":"TROMBONE HANDSLIDE MANDREL 0.5313\" (13.49mm) STANDARD SIZE #8","description":"TROMBONE HANDSLIDE MANDREL 0.5313\" (13.49mm) STANDARD #8","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493853237383,"sku":"2080H","price":99.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2080A_4a93fee2-5dee-4101-8044-3517636b2ae2.jpg?v=1595524400"},{"product_id":"trombone-handslide-mandrel-0-5625-14-29mm-standard-size-10","title":"TROMBONE HANDSLIDE MANDREL 0.5625\" (14.29mm) STANDARD SIZE #10","description":"TROMBONE HANDSLIDE MANDREL 0.5625\" (14.29mm) STANDARD #10","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493853270151,"sku":"2080J","price":99.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2080A_7f9eabd9-de63-47ca-9be2-44721bffc8c1.jpg?v=1595524403"},{"product_id":"trombone-handslide-mandrel-0-5938-15-08mm-standard-size-12","title":"TROMBONE HANDSLIDE MANDREL 0.5938\" (15.08mm) STANDARD SIZE #12","description":"TROMBONE HANDSLIDE MANDREL 0.5938\" (15.08mm) STANDARD #12","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493853302919,"sku":"2080L","price":99.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2080A_b9b71318-8260-4f2b-8180-46675b8df271.jpg?v=1595524408"},{"product_id":"trombone-handslide-mandrel-0-539-13-69mm-custom-size","title":"TROMBONE HANDSLIDE MANDREL 0.539\" (13.69mm) CUSTOM SIZE","description":"TROMBONE HANDSLIDE MANDREL 0.539\" (13.69mm) CUSTOM","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493853335687,"sku":"2082","price":99.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2080A_e0cdd905-9741-4afa-90c4-90b002386e42.jpg?v=1595524410"},{"product_id":"rivet-eze","title":"RIVET-EZE","description":"\u003cp\u003eOur Rivet-Eze offers real help for installing rivets with a steel backup\u003cbr\u003ewasher when doing case repair. Each end has a recessed hole for holding either a\u003cbr\u003estandard sized backup washer - 3\/8\" diameter, or an oversize washer -\u003cbr\u003e1\/2\" diameter. Embedded opposite each recess is a high strength magnet to\u003cbr\u003ehold the washer in place. Simply place the washer in the Rivet-Eze recessed area\u003cbr\u003eand insert the tool down between the case lining and the case shell, insert and\u003cbr\u003eset the rivet.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThe slim design, only 1\/8\" thick by 3\/4\" wide, allows steady\u003cbr\u003epositioning of the washer in tight places without having to completely pull the\u003cbr\u003ecase lining or cushion apart.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493853368455,"sku":"2110","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2110B.jpg?v=1595524413"},{"product_id":"flute-polishing-fixture","title":"FLUTE POLISHING FIXTURE","description":"\u003cp\u003eOur #2115 Flute Polishing Fixture is designed to securely hold a flute main body or foot section while polishing.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe unique design safely supports the instrument in any position.\u003cbr\u003e\u003cbr\u003eRe-adjustment and rotation is fast and easy.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eA real time saver. Built from durable, non-corrosive materials.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493853401223,"sku":"2115","price":58.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2115Bz.jpg?v=1595524416"},{"product_id":"dent-hammer-light-medium-duty","title":"DENT HAMMER - LIGHT \/ MEDIUM DUTY","description":"\u003cp\u003eOur #2125 hammer is an excellent choice for dent work on small and medium bore instruments: trumpets, french horn, etc. Both faces of the head have a diameter of 3\/4\" (19mm), with a slight radius on one side and a sharp radius on the other.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe hammer head is precision machined from non-corrosive, rust free, 303 stainless steel and polished to a fine finish. The hammer shaft is machined from 6066 T6 aluminum and fitted with a nicely tapered, cross patterned handle machined from Delrin®. For technicians who prefer to use a magnet to locate dent balls we have inset a strong, rare earth magnet into the handle's bottom end. Head, shaft, and handle are properly sized and weighted for good balance. Hammer overall length: 12\" (30.5cm) \/ weight: 4 oz. (113 gr).\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003eAll Votaw Tool Company dent hammers reflect over 45 years experience in dent removal and hammer design, and combined with the precision and accuracy afforded by our CNC lathe, we are able to offer a product designed and machined to exacting requirements and specifications.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493853433991,"sku":"2125","price":54.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2125nz.jpg?v=1595524421"},{"product_id":"parts-caddy","title":"PARTS CADDY","description":"\u003cp\u003eThis wood parts caddy keeps trumpet, cornet and french horn slides, pistons, caps, springs etc. organized and safe.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e      Sturdy, solid construction made from solid oak. Handy for make plays and cleaning jobs; works great for holding parts\u003cbr\u003e      during lacquering process. Safe to put in the oven for baked on finishes.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493853597831,"sku":"2150","price":36.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2150Bz.jpg?v=1595524406"},{"product_id":"roller-cone-concave-2-x-3-51mm-x-76mm","title":"ROLLER CONE CONCAVE 2\" x 3\" (51mm x 76mm)","description":"\u003cp\u003eMade from high quality rust resistant stainless steel this cone is precision machined and polished with full radiused end. Designed for bell flares on trumpet and cornet. Concave profile works well for burnishing.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cbr\u003e\u003cli\u003eDiameter: 2\" tapering to 0.5\" (52mm - 13mm)\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eLength (not including mounting stem): 3\" (76mm)\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eNote: this item requires #2251N Bearing Module for operation.\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003e\u003cspan style=\"color: #0000ee;\"\u003e\u003ca title=\"See all Modular Roller Dent Roller System Components\" href=\"http:\/\/www.votawtool.com\/tools\/dent-removal\/rollers\/modular-dent-roller-system.html\" target=\"_self\"\u003e\u003cspan style=\"color: #0000ee;\"\u003e\u003cstrong\u003eSee all Modular Roller Dent Roller System Components\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv id=\"prodhelp\" style=\"width:275px;\"\u003e\n\u003cbr\u003e\u003cp\u003e\u003ca href=\"#\" onclick=\"window.open('http:\/\/www.votawtool.com\/product_help\/Modular_Roller_System_NEW.asp','jsOpenWindow','scrollbars=yes,width=490,height=665');return false;\"\u003eAbout our Modular Dent Roller System\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ciframe width=\"560\" height=\"315\" src=\"\/\/www.youtube.com\/embed\/hDzet3j8Bbo\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493853761671,"sku":"2259N","price":85.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2259Ncr-20-z.jpg?v=1595524410"},{"product_id":"roller-cone-2-x-4-51mm-x-102mm","title":"ROLLER CONE 2\" x 4\" (51mm x 102mm)","description":"\u003cp\u003eMade from high density thermoplastic this cone is precision machined and polished with full radiused end. Mounting stem is made from rust free stainless steel. Designed for bell flares on trumpet, cornet, and other small bore instruments.\u003c\/p\u003e\u003cbr\u003e\u003cul\u003e\n\u003cbr\u003e\u003cli\u003eDiameter: 2\" tapering to 0.5\" (52mm - 13mm)\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eLength (not including mounting stem): 4\" (102mm)\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eNote: this item requires #2251N Bearing Module for operation.\u003c\/strong\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cspan style=\"color: #0000ee;\"\u003e\u003ca title=\"See all Modular Roller Dent Roller System Components\" href=\"http:\/\/www.votawtool.com\/tools\/dent-removal\/rollers\/modular-dent-roller-system.html\" target=\"_self\"\u003e\u003cspan style=\"color: #0000ee;\"\u003e\u003cstrong\u003eSee all Modular Roller Dent Roller System Components\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"prodhelp\" style=\"width: 275px;\"\u003e\n\u003cbr\u003e\u003cp\u003e\u003ca onclick=\"window.open('http:\/\/www.votawtool.com\/product_help\/Modular_Roller_System_NEW.asp','jsOpenWindow','scrollbars=yes,width=490,height=665');return false;\" href=\"#\"\u003eAbout our Modular Dent Roller System\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003ciframe src=\"\/\/www.youtube.com\/embed\/hDzet3j8Bbo\" frameborder=\"0\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493856055431,"sku":"2265N","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2265Ncr-20-z.jpg?v=1595524440"},{"product_id":"roller-cone-concave-6-x-6-152mm-x-152mm","title":"ROLLER CONE CONCAVE 6\" x 6\" (152mm x 152mm)","description":"\u003cp\u003eMade from high density thermoplastic this cone is precision machined and polished with full radiused end. Mounting stem is made from rust free stainless steel. Designed for bell flares on french horn, baritone, euphonium, tuba, sousaphone and other large bore instruments. Concave profile works well for burnishing.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cbr\u003e\u003cli\u003eDiameter: 6\" tapering to 1.5\" (152mm - 38mm)\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eLength (not including mounting stem): 6\" (152mm)\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eNote: this item requires #2251N Bearing Module for operation.\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003e\u003cspan style=\"color: #0000ee;\"\u003e\u003ca title=\"See all Modular Roller Dent Roller System Components\" href=\"http:\/\/www.votawtool.com\/tools\/dent-removal\/rollers\/modular-dent-roller-system.html\" target=\"_self\"\u003e\u003cspan style=\"color: #0000ee;\"\u003e\u003cstrong\u003eSee all Modular Roller Dent Roller System Components\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv id=\"prodhelp\" style=\"width:275px;\"\u003e\n\u003cbr\u003e\u003cp\u003e\u003ca href=\"#\" onclick=\"window.open('http:\/\/www.votawtool.com\/product_help\/Modular_Roller_System_NEW.asp','jsOpenWindow','scrollbars=yes,width=490,height=665');return false;\"\u003eAbout our Modular Dent Roller System\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ciframe width=\"560\" height=\"315\" src=\"\/\/www.youtube.com\/embed\/hDzet3j8Bbo\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493856120967,"sku":"2267N","price":163.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2267Ncr-20-z.jpg?v=1595524444"},{"product_id":"roller-cone-6-x-6-152mm-x-152mm","title":"ROLLER CONE 6\" x 6\" (152mm x 152mm)","description":"\u003cp\u003eMade from high density thermoplastic this cone is precision machined and polished with full radiused end. Mounting stem is made from rust free stainless steel. Designed for bell flares on french horn, baritone, euphonium, tuba, sousaphone and other large bore instruments.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cbr\u003e\u003cli\u003eDiameter: 6\" tapering to 1.5\" (152mm - 38mm)\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eLength (not including mounting stem): 6\" (152mm)\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eNote: this item requires #2251N Bearing Module for operation.\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003e\u003cspan style=\"color: #0000ee;\"\u003e\u003ca title=\"See all Modular Roller Dent Roller System Components\" href=\"http:\/\/www.votawtool.com\/tools\/dent-removal\/rollers\/modular-dent-roller-system.html\" target=\"_self\"\u003e\u003cspan style=\"color: #0000ee;\"\u003e\u003cstrong\u003eSee all Modular Roller Dent Roller System Components\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv id=\"prodhelp\" style=\"width:275px;\"\u003e\n\u003cbr\u003e\u003cp\u003e\u003ca href=\"#\" onclick=\"window.open('http:\/\/www.votawtool.com\/product_help\/Modular_Roller_System_NEW.asp','jsOpenWindow','scrollbars=yes,width=490,height=665');return false;\"\u003eAbout our Modular Dent Roller System\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ciframe width=\"560\" height=\"315\" src=\"\/\/www.youtube.com\/embed\/hDzet3j8Bbo\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493856153735,"sku":"2268N","price":143.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2268Ncr-20-z.jpg?v=1595524446"},{"product_id":"leak-test-plug-set-flute","title":"LEAK TEST PLUG SET - FLUTE","description":"\u003cp\u003eSet contains two tapered rubber stoppers for checking for leaks in soprano flute.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003ePut solid stopper in one end of body joint and stopper with hole in opposite end. Check for leaks by closing keys and blowing in stopper with hole.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493856252039,"sku":"3545F","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/3545Fz.jpg?v=1595524426"},{"product_id":"standard-dent-rod-3-4-19-05mm-steel","title":"STANDARD DENT ROD - 3\/4\" (19.05mm) - STEEL","description":"\u003cp\u003eOur standard 3\/4\" (19.05mm) diameter steel dent rod is tapered at one end and fitted with 3\/8-16 threads. The other end is fitted with 1\/2-13 threads. The 48\" (1.22m) length works great for all saxophones as well as large brass instrument.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eRather than simply thread the ends of the rods we have fitted each end with case hardened threaded inserts. Should the threads ever become damaged or break a new insert can be easily and inexpensively installed rather than having to replace the entire rod.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eOverall length: 48\" (1.22m)\u003c\/strong\u003e\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493856284807,"sku":"2300","price":58.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2300z.jpg?v=1595524430"},{"product_id":"standard-dent-rod-3-4-19-05mm-stainless-steel","title":"STANDARD DENT ROD - 3\/4\" (19.05mm) - STAINLESS STEEL","description":"\u003cp\u003eMachined from rust-free stainless steel, our standard 3\/4\" (19.05mm) diameter dent rod is tapered at one end and fitted with 3\/8-16 threads. The other end is fitted with 1\/2-13 threads. The 48\" (1.22m) length works great for all saxophones as well as large brass instrument.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eRather than simply thread the ends of the rods we have fitted each end with case hardened threaded inserts. Should the threads ever become damaged or break a new insert can be easily and inexpensively installed rather than having to replace the entire rod.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eOverall length: 48\" (1.22m)\u003c\/strong\u003e\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493856317575,"sku":"2301","price":76.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2300z_34ece4c0-a3ac-48ce-b757-f311656fbe45.jpg?v=1595524434"},{"product_id":"curved-18-dent-rod-slight-bend","title":"CURVED 18\" DENT ROD -  SLIGHT BEND","description":"\u003cdiv align=\"center\" style=\"margin-top: 15px;\"\u003e\n\u003cbr\u003e\u003cdiv align=\"left\" style=\"width: 85%;\"\u003e\n\u003cbr\u003e\u003cimg src=\"https:\/\/www.votawtool.com\/img\/products\/2304Az.jpg\" alt=\"DENT ROD - SLIGHT BEND\"\u003e\u003cbr\u003e\u003cul\u003e\n\u003cbr\u003e\u003cli\u003eMachined from rust free 303 stainless steel\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eWorks great on sax necks, crooks, etc.\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eOverall diameter: 0.5\" (12.7mm) both ends taper to 0.375\" (9.52mm)\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eOverall length approximately 18\" (45.7cm)\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eBoth ends threaded 3\/8\"-16\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493856415879,"sku":"2304","price":48.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2304Az.jpg?v=1595524447"},{"product_id":"curved-18-dent-rod-medium-bend","title":"CURVED 18\" DENT ROD - MEDIUM BEND","description":"\u003cdiv align=\"center\" style=\"margin-top: 15px;\"\u003e\n\u003cbr\u003e\u003cdiv align=\"left\" style=\"width: 85%;\"\u003e\n\u003cbr\u003e\u003cimg src=\"https:\/\/www.votawtool.com\/img\/products\/2305Az.jpg\" alt=\"DENT ROD - MEDIUM BEND\"\u003e\u003cbr\u003e\u003cul\u003e\n\u003cbr\u003e\u003cli\u003eMachined from rust free 303 stainless steel\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eWorks great on sax necks, crooks, etc.\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eOverall diameter: 0.5\" (12.7mm) both ends taper to 0.375\" (9.52mm)\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eOverall length approximately 18\" (45.7cm)\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eBoth ends threaded 3\/8\"-16\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493856448647,"sku":"2305","price":48.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2305Az.jpg?v=1595524450"},{"product_id":"trombone-handslide-mandrel-0-4219-10-72mm-standard-size-1","title":"TROMBONE HANDSLIDE MANDREL 0.4219\" (10.72mm) STANDARD SIZE #1","description":"TROMBONE HANDSLIDE MANDREL 0.4219\" (10.72mm) STANDARD #1","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493856809095,"sku":"2080A","price":89.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2080A_ddc26c2d-e848-4e97-af07-2738b6470655.jpg?v=1595524462"},{"product_id":"trombone-handslide-mandrel-0-4531-11-51mm-standard-size-3","title":"TROMBONE HANDSLIDE MANDREL 0.4531\" (11.51mm) STANDARD SIZE #3","description":"TROMBONE HANDSLIDE MANDREL 0.4531\" (11.51mm) STANDARD #3","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493856841863,"sku":"2080C","price":89.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2080A_db7819c5-ff0d-45e0-949d-7f06c753d58c.jpg?v=1595524464"},{"product_id":"trombone-handslide-mandrel-0-4844-12-30mm-standard-size-5","title":"TROMBONE HANDSLIDE MANDREL 0.4844\" (12.30mm) STANDARD SIZE #5","description":"TROMBONE HANDSLIDE MANDREL 0.4844\" (12.30mm) STANDARD #5","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493856874631,"sku":"2080E","price":89.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2080A_6d405450-1fc8-49e4-8bce-f9fcb8cf44d2.jpg?v=1595524466"},{"product_id":"trombone-handslide-mandrel-0-5156-13-10mm-standard-size-7","title":"TROMBONE HANDSLIDE MANDREL 0.5156\" (13.10mm) STANDARD SIZE #7","description":"TROMBONE HANDSLIDE MANDREL 0.5156\" (13.10mm) STANDARD #7","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493856907399,"sku":"2080G","price":99.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2080A_9c13e18f-3901-4b8f-89db-2183057fe34e.jpg?v=1595524469"},{"product_id":"trombone-handslide-mandrel-0-5469-13-89mm-standard-size-9","title":"TROMBONE HANDSLIDE MANDREL 0.5469\" (13.89mm) STANDARD SIZE #9","description":"TROMBONE HANDSLIDE MANDREL 0.5469\" (13.89mm) STANDARD #9","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493856940167,"sku":"2080I","price":99.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2080A_c4d1d497-ff83-4294-abe4-98da795d3d2f.jpg?v=1595524471"},{"product_id":"trombone-handslide-mandrel-0-5781-14-68mm-standard-size-11","title":"TROMBONE HANDSLIDE MANDREL 0.5781\" (14.68mm) STANDARD SIZE #11","description":"TROMBONE HANDSLIDE MANDREL 0.5781\" (14.68mm) STANDARD #11","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493857038471,"sku":"2080K","price":99.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2080A_c89af642-503a-4049-a73f-4d35c089e151.jpg?v=1595524473"},{"product_id":"trombone-handslide-mandrel-rack","title":"TROMBONE HANDSLIDE MANDREL RACK","description":"\u003cp\u003eKeep handslide mandrels protected and in neat order with this sturdy wood rack. Constructed from solid oak, our nicely finished rack can be mounted either vertically against a wall, or positioned horizontally above or below a workbench. Holds 16 mandrels.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eDIMENSIONS:\u003c\/strong\u003e\u003c\/p\u003e\u003cbr\u003e\u003cul\u003e\n\u003cbr\u003e\u003cli\u003e\n\u003cstrong\u003elength:\u003c\/strong\u003e 24\" (61cm)\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003e\n\u003cstrong\u003ewidth:\u003c\/strong\u003e 6\" (15.2cm)\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003e\n\u003cstrong\u003edepth:\u003c\/strong\u003e 6\" (15.2cm)\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493857071239,"sku":"2081","price":52.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2081Bcropz.jpg?v=1595524477"},{"product_id":"rivet-gun","title":"RIVET GUN","description":"\u003cp\u003eOur #2112 Rivet Gun is built using heavy duty formed steel (not cast) construction and offers slim design for getting into tight spaces.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003eComplete with four interchangeable heads for rivet sizes:\u003c\/p\u003e\u003cbr\u003e\u003cul style=\"margin-top: -8px;\"\u003e\n\u003cbr\u003e\u003cli\u003e3\/32\" (2.4mm)\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003e1\/8\" (3.2mm)\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003e5\/32\" (4.0mm)\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003e3\/16\" (4.8mm)\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493857136775,"sku":"2112","price":38.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2112z.jpg?v=1595524481"},{"product_id":"flat-head-brass-hammer","title":"FLAT HEAD BRASS HAMMER","description":"\u003cp\u003eOur \u003cb\u003e#2121 Brass Hammer\u003c\/b\u003e is\u003cbr\u003edesigned for medium duty general purpose shop use. Head is machined from half hard brass and fitted to a non-corrosive stainless steel shaft fitted with a nicely profiled Delrin handle.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eHammer\u003cbr\u003eDimensions:\u003cbr\u003e\u003cbr\u003eoverall weight: 7 ounces (200g)\u003cbr\u003e\u003cbr\u003eoverall length: 11\" (2.8cm)\u003cbr\u003e\u003cbr\u003ehead length: 1.375\" (35mm)\u003cbr\u003e\u003cbr\u003ehead diameter: 0.75\" (19.05mm)\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493857202311,"sku":"2121","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2121Dz.jpg?v=1595524469"},{"product_id":"wood-flex-mandrel-trombone","title":"WOOD FLEX MANDREL - TROMBONE","description":"\u003cp\u003eOur \u003cb\u003eWood Flex Trombone Mandrel\u003c\/b\u003e offers a\u003cbr\u003e        real improvement over conventional type table leg sticks. Used for\u003cbr\u003e        holding instruments for all types of repairs, our mandrels are machine\u003cbr\u003e        tapered from hardwood and then cut and quartered through the length of\u003cbr\u003e        the tapered section.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThis unique design allows the sides of the mandrel\u003cbr\u003e        to flex as the mandrel comes into contact with the inside of the\u003cbr\u003e        instrument bell, and thus provides more contact area between the bell\u003cbr\u003e        and the mandrel allowing for a better grip of the instrument with less\u003cbr\u003e        chance of the mandrel ballooning out and damaging the bell pipe. Secured\u003cbr\u003e        to the clamping end of the mandrel is a rugged square block of UHMW\u003cbr\u003e        (ultra high density polyethylene plastic) which allows the\u003cbr\u003e        mandrel to be clamped tight in any standard bench vise. These are a must\u003cbr\u003e        item in any brass shop.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493860053127,"sku":"2236","price":69.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2236RC.jpg?v=1595524500"},{"product_id":"titan-dent-roller","title":"TITAN DENT ROLLER","description":"\u003cp\u003eOur \u003cstrong\u003e#2242 Titan Dent Roller\u003c\/strong\u003e is designed for rolling out dents in medium and large sized bells including tuba, sousaphone, baritone\/euphonium and large bore marching horns. Made from precision stainless steel tubing, the roller is centerless ground and polished and then fitted to a hefty 0.750\" (19.05mm) vise mount shaft using two precision roller bearings to allow for smooth rolling action. The leading end of the roller is fitted with a radiused ABS plastic nose, eliminating any sharp edges.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cbr\u003e\u003cul\u003e\n\u003cbr\u003e\u003cli\u003eOverall Length: 33\" (84cm)\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eRoller Length: 19\" (48cm)\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eRoller Diameter: 1.5\" (38.1mm)\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eMounting Shaft Diameter: 0.75\" (19.05mm)\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003eComes in a sturdy pvc storage case.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493860184199,"sku":"2242","price":295.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2242crz.jpg?v=1595524510"},{"product_id":"dent-rod-elbow-3-8-16-45-degree","title":"DENT ROD ELBOW 3\/8-16 - 45 DEGREE","description":"\u003cp\u003eOur \u003cstrong\u003eDent Rod Elbows\u003c\/strong\u003e are designed to work as\u003cbr\u003e        extensions on a standard dent rod for changing the angle and position of the dent ball. Great for sax bow work. Designed to screw onto dent rod with 3\/8-16 thread size and use dent balls with same thread.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493860675719,"sku":"2310","price":10.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2310z.jpg?v=1595524506"},{"product_id":"dent-rod-elbow-3-8-16-65-degree","title":"DENT ROD ELBOW 3\/8-16 - 65 DEGREE","description":"\u003cp\u003eOur \u003cstrong\u003eDent Rod Elbows\u003c\/strong\u003e are designed to work as\u003cbr\u003e        extensions on a standard dent rod for changing the angle and position of the dent ball. Great for sax bow work. Designed to screw onto dent rod with 3\/8-16 thread size and use dent balls with same thread.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493860741255,"sku":"2311","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2311z.jpg?v=1595524508"},{"product_id":"dent-rod-elbow-3-8-16-90-degree","title":"DENT ROD ELBOW 3\/8-16 - 90 DEGREE","description":"\u003cp\u003eOur \u003cstrong\u003eDent Rod Elbows\u003c\/strong\u003e are designed to work as\u003cbr\u003e        extensions on a standard dent rod for changing the angle and position of the dent ball. Great for sax bow work. Designed to screw onto dent rod with 3\/8-16 thread size and use dent balls with same thread.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493860774023,"sku":"2312","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2312z.jpg?v=1595524510"},{"product_id":"retaining-nut","title":"RETAINING NUT","description":"\u003cp\u003eReplacement brass retaining for the following tools:\u003c\/p\u003e\u003cbr\u003e\u003cul\u003e\n\u003cbr\u003e\u003cli\u003e#2040 Spring Loaded Dent Ball Driver\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003e#2057 Dent Ball Driver\/Puller\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003e#2058 Dent Ball Puller Cable - Short\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003e#2059 Dent Ball Puller Cable - Long\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003e#2066 Tapered Mandrel Set - Curved Mouthpipes\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003e#2320 Economy Dent Ball Driver\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493860905095,"sku":"2323","price":3.0,"currency_code":"USD","in_stock":true}]},{"product_id":"woodwind-work-fixture-additional-base","title":"WOODWIND WORK FIXTURE ADDITIONAL BASE","description":"\u003cp\u003eMounting base for our #2330 Woodwind Work Fixture. Installs into workbench top (3\/4\" (19mm) hole required). Three mounting screws included.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003eNote that this base is designed for fixtures purchased after April 2011. Older fixtures will also require \u003cstrong\u003e\u003ca href=\"\/woodwind-work-fixture-upper-base-assembly.html\"\u003e#2332 Upper Base Assembly\u003c\/a\u003e\u003c\/strong\u003e.\u003c\/p\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493860970631,"sku":"2331","price":23.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2331z.jpg?v=1595524524"},{"product_id":"pad-cup-heater","title":"PAD CUP HEATER","description":"\u003cp\u003eOur Pad Cup Heater is one of the most practical and time saving tools to come into the industry in a very long time. Used worldwide by repair technicians and manufacturers, this versatile, easy to use tool is guaranteed to significantly speed up pad work, as well as prove useful in various other types of woodwind repair.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINSTANT HEATING:\u003c\/strong\u003e\u003cbr\u003e Hold the graphite electrodes up to the key cup and squeeze the palm trigger. A 9-10mm key cup (clarinet upper joint keys for example) will heat up to melting temperature for pad adhesive in only 2-3 seconds. Larger 16-17mm cups in only 4-5 seconds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAFE:\u003c\/strong\u003e\u003cbr\u003e No more having to bring a flame within close contact of the instrument, which means no scorching of pads, corks, or instrument bodies. And the graphite electrodes won't scratch the key finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLIGHT WEIGHT:\u003c\/strong\u003e\u003cbr\u003e The entire handpiece measures 7\" (178mm) long by 2\" (51mm) in width and weighs only 5 ounces (142gr).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMANY USES:\u003c\/strong\u003e\u003cbr\u003e The #2350 Pad Cup Heater is designed to work on all clarinets, piccolos, oboes, flute trill and 'c' keys, and the upper stack keys (nickel or silver plated) on saxophone where using a torch around pearls and felts can be difficult. Note that because this tool uses the metal of the key cup itself to conduct heat, it will not easily work on keys that have a lacquered finish, however positioning the electrodes on the edges of the key cup where the lacquer is thin or worn will usually allow current to pass through to the metal. Besides being used for pad work this tools also works great for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003estuck hinge rods\u003c\/strong\u003e\u003cbr\u003ePenetrating oil used with heat is an excellent method for working free corroded key hinge screws (a flame has never been a practical source of heat as it will quickly damage the body or key parts such as rollers or corks). Simply heat up the key hinge with the Pad Cup Heater and apply penetrating oil - many stuck screws that you would normally have to cut out can easily be removed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ekey adjustment corks\u003c\/strong\u003e\u003cbr\u003eSimply cut cork to size, apply a dab of our Surduzstik glue or other type of hot glue or adhesive, heat the key foot and insert the cork into place. Quick, clean, and no removal of keys necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER REQUIREMENTS:\u003c\/strong\u003e\u003cbr\u003e The #2350 Pad Cup Heater is designed to operate on 110-120 volts AC. For 230-240 volt power source order one of our \u003ca href=\"https:\/\/votawtool.com\/collections\/voltage-converters\" title=\"voltage converters\"\u003e\u003cb\u003evoltage converters\u003c\/b\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp style=\"clear: right;\" data-mce-style=\"clear: right;\"\u003e\u003cstrong\u003eGRAPHITE TIPS:\u003c\/strong\u003e\u003cbr\u003e The graphite electrodes on this tool have a long life - ours have been used in the shop for over a year with no trouble. They are fragile, however, and can easily break if the handpiece is dropped or something heavy falls on them while the handpiece is setting on the workbench. We recommend having a replacement set (#2354) on hand. Replacement should also be made when tip of electrode has worn down 1\/4\" 6.5mm) or more.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493861068935,"sku":"2350","price":677.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2350A1a3z.jpg?v=1595524527"},{"product_id":"replacement-electrodes-pair","title":"REPLACEMENT ELECTRODES (PAIR)","description":"\u003cp\u003eReplacement electrodes for our #2350 Pad Cup Heater.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493861134471,"sku":"2354","price":30.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2354z_1.jpg?v=1595524519"},{"product_id":"saxophone-key-cup-alignment-tool","title":"SAXOPHONE KEY CUP ALIGNMENT TOOL","description":"\u003cp\u003eThis tool is designed for centering a\u003cbr\u003esaxophone key cup over the tone hole. The slot in the tool is positioned over\u003cbr\u003ethe key arm and sideward pressure is applied to move the key to left or right.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003eProvides easy, accurate positioning of key cup without marring the key. Designed with a different width slot in each end of the tool to accomodate wide variety of key sizes.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003ePrecision machined from aircraft quality T6 aluminum.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493861363847,"sku":"2372","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2372ARC.jpg?v=1595524538"},{"product_id":"flute-body-mandrel","title":"FLUTE BODY MANDREL","description":"\u003cp\u003eOur flute body mandrel is designed for working on flute main body and foot sections. Made from high quality drill rod that is ground and polished to a roundness tolerance of ±.0005\" and finished with a smooth, full radius at one end.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eExcellent for burnishing, hammering or rolling out dents, straightening bent\u003cbr\u003ebodies, rounding out tenon joints, or performing tone hole work.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eDiameter: 0.734\" (18.64mm). Overall Length: 18\" (45.7cm).\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493861757063,"sku":"2385","price":52.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2385Az.jpg?v=1595524542"},{"product_id":"reversible-bench-peg","title":"REVERSIBLE BENCH PEG","description":"\u003cp\u003eOur newly re-designed #2401 Reversible Bench Peg works great for holding small woodwind bodies (Bb clarinet, oboe, etc.) while trimming or sanding tenon corks. The peg supports the end of the instrument joint that needs the cork trimmed and the technician's body supports the opposite end.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003eNicely machined from non-corrosive aluminum and high density thermoplastic, the reversible design offers a tapered convex surface that fits inside the bore to safely support the instrument and a shallow concave surface to support delicate bell tenons from the outside.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe Bench Peg consists of three pieces: a shaft, cone, and mounting flange. The flange mounts permanently into the side of the workbench (3\/4\" (19mm) hole required). Easy to use:  simply insert the shaft into the mounting flange, position the cone for which ever end is needed and tighten thumb screw to lock cone in place. Place the end of the instrument on end of cone and use stomach or abdomen to hold instrument while trimming cork.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493863166087,"sku":"2401","price":33.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2401z.jpg?v=1595524551"},{"product_id":"tenon-cork-stripper","title":"TENON CORK STRIPPER","description":"\u003cp\u003eOur #2410 Tenon Cork Stripper offers an easy\u003cbr\u003e        and fast way of stripping corks from woodwind tenons.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eDesigned to work on body\u003cbr\u003e        joints and mouthpieces for all:\u003cbr\u003e\u003cbr\u003e        =\u0026gt; Bb Soprano Clarinets\u003cbr\u003e\u003cbr\u003e        =\u0026gt; Oboes\u003cbr\u003e\u003cbr\u003e        =\u0026gt; Alto and Bass Clarinets\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eEASY TO USE\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e        Clamp the mounting block in a bench vise and position the tenon peg and\u003cbr\u003e        tool rest for the size instrument being worked on. See \u003cb\u003eFig. 1\u003c\/b\u003e.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e        Position the instrument body onto the tenon peg and while rotating the\u003cbr\u003e        body with one hand, use the other hand to set the cutting tool on the\u003cbr\u003e        tool rest and cut the old cork away (much like a turning lathe\u003cbr\u003e        operates.) See \u003cb\u003eFig. 2\u003c\/b\u003e.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e        The cutting tool offers a high carbon steel chisel blade and does a\u003cbr\u003e        quick job of removing old cork as well as dirt, glue, and grease build\u003cbr\u003e        up from the entire cork channel.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e        Comes complete with mounting block, tool rest, tenon pegs and adapters,\u003cbr\u003e        cutting tool, and wooden storage stand.\u003c\/p\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493863395463,"sku":"2410","price":63.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2410jz.jpg?v=1595524555"},{"product_id":"flute-piccolo-tuning-rod","title":"FLUTE\/PICCOLO TUNING ROD","description":"\u003cp\u003eAt last, a tuning rod for flute and piccolo head\u003cbr\u003ejoints that is also designed for removing and inserting tuning corks. The #2424\u003cbr\u003eFlute\/Piccolo Cork \u0026amp; Tuning Rod is machined from #6061 T6 aluminum, and has\u003cbr\u003ea sturdy 3\/8\" diameter and 10\" length with a nicely polished finish.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eEach end of the rod is marked to designate instrument and has an accurately cut,\u003cbr\u003eeasy to read, cork positioning mark. For driving out old stuck corks, one end of the rod is drilled with a hole large\u003cbr\u003eand deep enough to fit over the screw.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003eHole in end of rod\u003cbr\u003eallows pressure to be applied\u003cbr\u003eagainst metal cork disc instead of stem\u003cbr\u003escrew when removing old cork.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493863493767,"sku":"2424","price":16.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2424BRC.jpg?v=1595524561"},{"product_id":"solder-in-slide-plug-500-x-4","title":"SOLDER-IN SLIDE PLUG .500 X 4\"","description":"\u003cdiv align=\"center\"\u003e\n\u003cbr\u003e\u003ccenter\u003e\n\u003cbr\u003e\u003ctable border=\"0\" cellpadding=\"3\" cellspacing=\"0\" width=\"100%\" bgcolor=\"#FFFFD7\"\u003e\n\u003cbr\u003e\u003ctr\u003e\n\u003cbr\u003e\u003ctd\u003e\n\u003cbr\u003e\u003cp align=\"center\" style=\"text-indent: 0\"\u003e\u003cb\u003e\u003cfont color=\"#000000\"\u003eABOUT OUR\u003cbr\u003eSOLDER-IN SLIDE PLUGS\u003c\/font\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003cbr\u003e\u003ctd bgcolor=\"#FFFFFF\" rowspan=\"2\"\u003e\u003cimg border=\"0\" src=\"https:\/\/www.votawtool.com\/img\/products\/2429.jpg\" width=\"324\" height=\"452\"\u003e\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\u003ctr\u003e\n\u003cbr\u003e\u003ctd\u003e\n\u003cbr\u003e\u003cp style=\"text-indent: 0\"\u003e\u003cfont color=\"#000000\"\u003eAll too often it seems easier to\u003cbr\u003etry various 'short cut' methods of removing frozen slides rather than proceeding\u003cbr\u003eto what many times has to be done in the long run; that is, unsoldering the\u003cbr\u003ecrook and soldering a plug into the stuck slide. The plug can then be either\u003cbr\u003egrasped with a pair of vise grips or clamped in a vise to work the pipe out.\u003c\/font\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cp style=\"text-indent: 0\"\u003e\u003cfont color=\"#000000\"\u003eIt has been the experience in\u003cbr\u003eour shop that if a slide does not come out with a minimum of effort (see our \u003ca href=\"\/d-s-t-slide-knockerouter.html\"\u003e\u003cb\u003e\u003cu\u003e#2440\u003cbr\u003eT-Slide Knockerouter\u003c\/u\u003e\u003c\/b\u003e\u003c\/a\u003e or \u003ca href=\"\/slide-knocker.html\"\u003e\u003cb\u003e\u003cu\u003e#2446\u003cbr\u003eSlide Knocker\u003c\/u\u003e\u003c\/b\u003e\u003c\/a\u003e) we are much further ahead proceeding with this method, which\u003cbr\u003ein most cases should only take about 10-15 minutes shop time with a minimum of\u003cbr\u003etools.\u003c\/font\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cp style=\"text-indent: 0\"\u003e\u003cfont color=\"#000000\"\u003eOur Solder-in Slide Plugs are\u003cbr\u003emachined from solid brass rod (brass allows for good solder flow and adhesion)\u003cbr\u003eand are tapered to fit a wide range of slide sizes. The tapered portion of the\u003cbr\u003eplug has been drilled out, allowing for less mass and thus a shorter heat up\u003cbr\u003etime.\u003c\/font\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cp style=\"text-indent: 0\"\u003e\u003cfont color=\"#000000\"\u003eOffered in five different sizes\u003cbr\u003eto cover the wide range of slide pipe diameters. The #2430 is designed\u003cbr\u003especifically for a trumpet main tuning slide (mouth pipe side), due to the\u003cbr\u003eminimal distance between the bell rim and the slide receiver.\u003c\/font\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/center\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003chr width=\"100%\" noshade\u003e\u003cbr\u003e\u003cdiv align=\"center\"\u003e\n\u003cbr\u003e\u003ccenter\u003e\n\u003cbr\u003e\u003ctable border=\"0\" cellpadding=\"4\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003cbr\u003e\u003ctr\u003e\n\u003cbr\u003e\u003ctd\u003e\u003cb\u003e#2431 SOLDER-IN SLIDE PLUG .500 x 4\"\u003cbr\u003e(12.7mm x 10.16cm)\u003c\/b\u003e\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\u003ctr\u003e\n\u003cbr\u003e\u003ctd\u003e\n\u003cbr\u003e\u003cp align=\"center\"\u003e\u003cimg border=\"0\" src=\"https:\/\/www.votawtool.com\/img\/products\/2431.jpg\" width=\"316\" height=\"57\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/center\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv align=\"center\"\u003e\n\u003cbr\u003e\u003ccenter\u003e\u003cbr\u003e\u003c\/center\u003e\n\u003cbr\u003e\n\u003c\/div\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493863592071,"sku":"2431","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2431.jpg?v=1595524559"},{"product_id":"solder-in-slide-plug-1-0-x-4","title":"SOLDER-IN SLIDE PLUG 1.0\" X 4\"","description":"\u003cdiv align=\"center\"\u003e\n\u003cbr\u003e\u003ccenter\u003e\n\u003cbr\u003e\u003ctable border=\"0\" cellpadding=\"3\" cellspacing=\"0\" width=\"100%\" bgcolor=\"#FFFFD7\"\u003e\n\u003cbr\u003e\u003ctr\u003e\n\u003cbr\u003e\u003ctd\u003e\n\u003cbr\u003e\u003cp align=\"center\" style=\"text-indent: 0\"\u003e\u003cb\u003e\u003cfont color=\"#000000\"\u003eABOUT OUR\u003cbr\u003eSOLDER-IN SLIDE PLUGS\u003c\/font\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003cbr\u003e\u003ctd bgcolor=\"#FFFFFF\" rowspan=\"2\"\u003e\u003cimg border=\"0\" src=\"https:\/\/www.votawtool.com\/img\/products\/2429.jpg\" width=\"324\" height=\"452\"\u003e\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\u003ctr\u003e\n\u003cbr\u003e\u003ctd\u003e\n\u003cbr\u003e\u003cp style=\"text-indent: 0\"\u003e\u003cfont color=\"#000000\"\u003eAll too often it seems easier to\u003cbr\u003etry various 'short cut' methods of removing frozen slides rather than proceeding\u003cbr\u003eto what many times has to be done in the long run; that is, unsoldering the\u003cbr\u003ecrook and soldering a plug into the stuck slide. The plug can then be either\u003cbr\u003egrasped with a pair of vise grips or clamped in a vise to work the pipe out.\u003c\/font\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cp style=\"text-indent: 0\"\u003e\u003cfont color=\"#000000\"\u003eIt has been the experience in\u003cbr\u003eour shop that if a slide does not come out with a minimum of effort (see our \u003ca href=\"http:\/\/www.votawtool.com\/zcom.asp?pg=products\u0026amp;specific=jnqrnri0\"\u003e\u003cb\u003e\u003cu\u003e#2440\u003cbr\u003eT-Slide Knockerouter\u003c\/u\u003e\u003c\/b\u003e\u003c\/a\u003e or \u003ca href=\"http:\/\/www.votawtool.com\/zcom.asp?pg=products\u0026amp;specific=jnrmeom0\"\u003e\u003cb\u003e\u003cu\u003e#2446\u003cbr\u003eSlide Knocker\u003c\/u\u003e\u003c\/b\u003e\u003c\/a\u003e) we are much further ahead proceeding with this method, which\u003cbr\u003ein most cases should only take about 10-15 minutes shop time with a minimum of\u003cbr\u003etools.\u003c\/font\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cp style=\"text-indent: 0\"\u003e\u003cfont color=\"#000000\"\u003eOur Solder-in Slide Plugs are\u003cbr\u003emachined from solid brass rod (brass allows for good solder flow and adhesion)\u003cbr\u003eand are tapered to fit a wide range of slide sizes. The tapered portion of the\u003cbr\u003eplug has been drilled out, allowing for less mass and thus a shorter heat up\u003cbr\u003etime.\u003c\/font\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cp style=\"text-indent: 0\"\u003e\u003cfont color=\"#000000\"\u003eOffered in five different sizes\u003cbr\u003eto cover the wide range of slide pipe diameters. The #2430 is designed\u003cbr\u003especifically for a trumpet main tuning slide (mouth pipe side), due to the\u003cbr\u003eminimal distance between the bell rim and the slide receiver.\u003c\/font\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/center\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003chr width=\"100%\" noshade\u003e\u003cbr\u003e\u003cdiv align=\"center\"\u003e\n\u003cbr\u003e\u003ccenter\u003e\n\u003cbr\u003e\u003ctable border=\"0\" cellpadding=\"4\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003cbr\u003e\u003ctr\u003e\n\u003cbr\u003e\u003ctd width=\"100%\"\u003e\n\u003cb\u003e#2434 SOLDER-IN SLIDE PLUG\u003c\/b\u003e\u003cb\u003e1.0\"\u003cbr\u003ex 4\"\u003c\/b\u003e\u003cb\u003e(25.4mm x 10.16cm)\u003c\/b\u003e\n\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\u003ctr\u003e\n\u003cbr\u003e\u003ctd width=\"690\"\u003e\n\u003cbr\u003e\u003cp align=\"center\"\u003e\u003cimg border=\"0\" src=\"https:\/\/www.votawtool.com\/img\/products\/2434.jpg\" width=\"322\" height=\"95\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/center\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv align=\"center\"\u003e\n\u003cbr\u003e\u003ccenter\u003e\u003cbr\u003e\u003c\/center\u003e\n\u003cbr\u003e\n\u003c\/div\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493865558151,"sku":"2434","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2434.jpg?v=1595524567"},{"product_id":"ds-t-slide-knockerouter","title":"D'S T-SLIDE KNOCKEROUTER","description":"\u003cp\u003eLocal Springfield, Missouri technician, Duane Lewis,\u003cbr\u003edesigned and manufactures these handy tools used for removing slightly stuck\u003cbr\u003etuning slides. The seven different sizes are shaped and contoured to cover\u003cbr\u003epractically all tuning slides from trumpet and cornet on up to sousaphone.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003eSimple to use - place contoured end against inner surface of slide crook and\u003cbr\u003elightly tap with mallet. Made from solid oak with cushioned end to protect against damage to the crook.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSet contains 7 different sizes.\u003c\/p\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493865590919,"sku":"2440","price":75.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2440A1RC.jpg?v=1595524570"},{"product_id":"arbor-press-1-2-ton","title":"ARBOR PRESS - 1\/2 TON","description":"\u003cp\u003eOur 1\/2 ton (0.454 tonnes) arbor press is designed for general shop use. Four position steel anvil with steel rams and pinions. Heavy duty, cast iron construction.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003ePress Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cbr\u003e\u003cul\u003e\n\u003cbr\u003e\u003cli\u003ewidth: 4\" (10.2 cm)\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003elength: 10\" (25.4 cm)\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eheight: 9 1\/2\" (24.1 cm)\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eweight: 25 lbs (11.3 kg)\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003ecapacity over anvil: 4 1\/2\" (114mm)\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eram size: 3\/4\" square (19.05mm)\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":34493866147975,"sku":"2461","price":74.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/9845\/6711\/products\/2461A1crZ.jpg?v=1595524574"}],"url":"https:\/\/votawtool.com\/collections\/all\/lx2000+bc602+1199+7165+l7165+l155s+clarinet-17+l4k+cl614+7115.oembed","provider":"Votaw Tool Company","version":"1.0","type":"link"}