All

12" FLUORESCENT LAMP - REPLACEMENT

Replacement 12" fluorescent lamp for the #8112 unit. Supplied with safetysleeve and two pieces of...

Replacement 12" fluorescent lamp for the #8112 unit. Supplied with safetysleeve and two pieces of shrink material to cover lamp ends. LAMP DIMENSIONS: length: 12" (31cm) diameter (with safety sleeve): 0.660" (16.7mm)

20" FLUORESCENT LAMP - REPLACEMENT

Replacement 20" fluorescent lamp for the #8120 unit. Supplied with safetysleeve and two pieces of...

Replacement 20" fluorescent lamp for the #8120 unit. Supplied with safetysleeve and two pieces of shrink material to cover lamp ends. LAMP DIMENSIONS: length: 20" (51cm) diameter (with safety sleeve): 0.660" (16.7mm)

20" FLUORESCENT LAMP W/ CORD & PLUG

Our #8120 Fluorescent Lamp comes equipped with a 20" (508mm) lamp and a flexible yet durable 8 fo...

Our #8120 Fluorescent Lamp comes equipped with a 20" (508mm) lamp and a flexible yet durable 8 foot (2.4m) cord with a 4 pin male style plug that connects to the control unit. The cord is soldered to the lamp and solidly reinforced at the connection to deter fraying. The entire lamp tube is covered with our exclusive Safety Sleeve - a clear, tough, plastic sleeve that is permanently fitted to the lamp providing excellent protection against breakage as well as safety against flying glass shoul...

6" FLUORESCENT LAMP - REPLACEMENT

Replacement 6" fluorescent lamp for the #8106 unit. Supplied with safetysleeve and two pieces of ...

Replacement 6" fluorescent lamp for the #8106 unit. Supplied with safetysleeve and two pieces of shrink material to cover lamp ends. LAMP DIMENSIONS: length: 6" (15.2cm) diameter (with safety sleeve): 0.660" (16.7mm)

CONTROL UNIT - FLUORESCENT

Our #8090 Leak Light Control Unit is designed to operate our complete selection of fluorescent la...

Our #8090 Leak Light Control Unit is designed to operate our complete selection of fluorescent lamps.Features include: sturdy aluminum chassis solid components including electronic self-start ballast illuminated ON/OFF rocker switch fuse protected 6' (1.82m) heavy duty power cord with ground plug 110-120 volt power source (for 220-240 volt see our voltage convertors) Dimensions: length: 5.6" (143mm) width: 3.6" (92mm) height: 2.5" (63mm) Lamps sold separately.

CONTROL UNIT - INCANDESCENT

Our #8012 Leak Light Control Unit is designed to operate our complete selection of incandescent l...

Our #8012 Leak Light Control Unit is designed to operate our complete selection of incandescent lamps. Features include simultaneous operation of two incandescent lamps, sturdy aluminum chassis, front panel ON/OFF indicator lamp, and grounded power cord. Power requirements: 110-120 volt AC. For 220-240 volt application see our voltage convertor. Dimensions: length: 4.5" (114mm) width: 3.6" (92mm) height: 2.5" (63mm) Lamps and cords sold separately.

DOUBLE 6" FLUORESCENT LAMP W/ CORD & PLUG

Our #8107 Double Fluorescent Lamp comes equipped with two 6" (305mm) lamps and a flexible yet dur...

Our #8107 Double Fluorescent Lamp comes equipped with two 6" (305mm) lamps and a flexible yet durable 8 foot (2.1m) cord with a 4 pin male style plug that connects to the control unit. The cord is soldered to the lamp and solidly reinforced at the connection to deter fraying. Excellent for baritone sax. Flexible area between lamps allows insertion into low Eb or C tone holes. Provides over 12" (30.5mm) of light. Note that due to tone hole size limitations lamps do not come equipped with safet...

ECONOMY FLUORESCENT LEAK LIGHT SYSTEM

The #8412 ECONOMY FLUORESCENT LEAK LIGHT SYSTEM includes one each of the items listed below. Desi...

The #8412 ECONOMY FLUORESCENT LEAK LIGHT SYSTEM includes one each of the items listed below. Designed to work on 110-120 volt power source. For 220-240 volt power source order our voltage converter. Includes one each of the following: #8090 Control Unit #8112 Fluorescent 12" Lamp with Cord & Plug

INCANDESCENT LAMP - WEDGE STYLE BASE

Incandescent lamp with wedge style base for use on old style #8104 (discontinued) cord, plug, and...

Incandescent lamp with wedge style base for use on old style #8104 (discontinued) cord, plug, and jack. Rated 6.3 volt.

LARGE INCANDESCENT CORD W/ PLUG & SOCKET

ABOUT OUR LEAK LIGHTS We offer a wide variety of leak light control units and lamps t...

ABOUT OUR LEAK LIGHTS We offer a wide variety of leak light control units and lamps to meet all the demands of the repair shop, and with versatility in mind, our leak lights can be purchased either as separate components to meet individual needs, or as a packaged system.IMPORTANT NOTE: All of our fluorescent and incandescent lamps with cord and plug require a Control Unit for operation. Our #8126 Incandescent Cord, Plug & Socket is used with our #8222 Large Incand...

LARGE INCANDESCENT LAMP

Our #8222 Large Incandescent Lamp has a bayonet style base. Similar to the old Erick Brand 'saxop...

Our #8222 Large Incandescent Lamp has a bayonet style base. Similar to the old Erick Brand 'saxophone' lamp. Requires our #8126 Cord w/ Plug & Socket.Dimensions: bulb diameter: 0.750" (19mm) socket diameter: 0.600" (15mm) Will work with our #8012 and #8091 control units, as well as the following older models: #8004 #8010A #8005 #8075 #8010 #8075A About Our Leak Lights

MICRO INCANDESCENT CORD & SOCKET

Durable, yet flexible 8' (2.43m) cord complete with plug andsocket for our #8151Micro Incandescen...

Durable, yet flexible 8' (2.43m) cord complete with plug andsocket for our #8151Micro Incandescent Plug-In Lamp.The #8150Micro Lamp Cord withPlug and Socket will work withall of the following Votaw Control Unit models: #8002#8004#8010#8010A#8012 #8015#8075#8075A#8091

MICRO INCANDESCENT LAMP - UPGRADE KIT

For customers who have our older #8100 solder-on style miniature lamp this upgradekit will conver...

For customers who have our older #8100 solder-on style miniature lamp this upgradekit will convert your existing cord to our new plug-inmicro lamp.Kit includes: socket, lamp, heat shrink, and instructions. Easy installation.