MISCELLANEOUS SHOP TOOLS

15 items

BURNISHING TAPE 2" X 100' ROLL

This clear, adhesive backed, high density polyethylenetape is designed to be applied directly to ...

This clear, adhesive backed, high density polyethylenetape is designed to be applied directly to the instrument for burnishingdents. Simply wipe clean the surface to be burnished, cut off necessary length,and apply tape to dented area as needed. Practically guarantees no marring orscratching of finish.An excellent product for all silver or gold plated finishes, as well asall solid unlacquered metals. Care should be taken with lacquered finishes asaggressive burnishing may crack the lacquer an...

$12.95

Product SKU: 3049

MAGNETIC 'V' BLOCK UNIVERSAL VISE JAWS

A must item in any shop, our 'V' Block vise jaws are designed to work with most bench vise model...

A must item in any shop, our 'V' Block vise jaws are designed to work with most bench vise models for securely holding all mandrels between diameters of 3/8" (9.5mm) up to 2" (50mm).Powerful neodymium magnets hold the blocks in place against steel vise jaws while clamping or removing the rod from the vise. Easily rotate blocks to hold mandrel at any angle from horizontal to vertical. CNC machined from 6061T6 aluminum billet, will not mar or damage mandrel surface. BLOCK DIMENSIONS: lengt...

$94.50

Product SKU: 2292

DEBURRING TOOL

Pivot blade swivels for easy removal of bur from inside tubing edge. Extra blade storage in handl...

Pivot blade swivels for easy removal of bur from inside tubing edge. Extra blade storage in handle end.Handle length: 5" (127mm).Comes with 2 blades.

$8.32

Product SKU: 2795

CUSTOM DIE HANDLE

Our CUSTOM DIE HANDLE is specially designed for the musical instrument repair shop. The short 3" ...

Our CUSTOM DIE HANDLE is specially designed for the musical instrument repair shop. The short 3" (76mm) length allows easy, steady control, especially when starting the cut on even the smallest of thread sizes.Non-corrosive aluminum construction. Designed to hold all 13/16" (20.6mm) thread cutting dies.

$18.00

Product SKU: 6381

PIN VISE

Nicely balanced, fluted aluminum handle with precision steel chuck.Capacity: 0 to .059" (0 to 1.5...

Nicely balanced, fluted aluminum handle with precision steel chuck.Capacity: 0 to .059" (0 to 1.5mm).Overall Length: 4-1/2" (114mm).

$11.20

Product SKU: 6758

TRIANGULAR SCRAPER

Useful tool for scraping, trimming, and deburring metals, tubing, plastics, and other materials. ...

Useful tool for scraping, trimming, and deburring metals, tubing, plastics, and other materials. Perfect for scraping solder joints and removing excess solder.Hollow ground edges stay sharp longer and resharpen easily on grinding wheel.Hardened and tempered triple edge blade is secured in wood handle with steel ferrule.Overall length: 6 1/2" (165mm).

$16.86

Product SKU: 2799

RAZOR BLADES

High carbon single edge razor blades.Thickness: 0.009" (0.23mm).Sold in box of 100.

High carbon single edge razor blades.Thickness: 0.009" (0.23mm).Sold in box of 100.

$14.92

Product SKU: 2812

TAP WRENCH - SMALL

Slim design with sliding handle works well for rethreading posts on woodwind instruments where ac...

Slim design with sliding handle works well for rethreading posts on woodwind instruments where access and maneuverability is limited.Holds tap sizes 0 - 1/4" (2mm - 6mm).

$14.50

Product SKU: 6382

SCRIBER - SINGLE POINT

Use as a scribe for layout work, scraping solder joints, cleaning out cracks, etc.Includes the fo...

Use as a scribe for layout work, scraping solder joints, cleaning out cracks, etc.Includes the following features: Hardened 9-D ground steel needle points Overall length 4 1/2" (114mm)

$10.14

Product SKU: 2798

PIN VISE WITH SWIVEL HEAD

Use for holding drill bits and small thread cutting taps for working in tight places. Works great...

Use for holding drill bits and small thread cutting taps for working in tight places. Works great for drilling out or rethreading body posts where clearance from body makes access difficult.Comes with two double-ended collets to provide 0 to .125" (0 to 3.2 mm) capacity. Collet not in use stores in handle end.Overall length 3 1/2" (89 mm).

$6.00

Product SKU: 6754

TAP WRENCH - RATCHET ACTION

Designed with ratcheting action this wrench works great for threading posts on saxophones and oth...

Designed with ratcheting action this wrench works great for threading posts on saxophones and other hard to reach places.Sliding handle and 3 position 'gear box' for left or right ratchet and lock position.Holds tap sizes 0 - 1/4" (2mm - 6mm).

$36.12

Product SKU: 6383

TAPERED SPINDLE ARBOR

Tapered threaded spindle for mountingsmall 2" and 4" buffs, wire brushes with wood hubs, etc.Desi...

Tapered threaded spindle for mountingsmall 2" and 4" buffs, wire brushes with wood hubs, etc.Designed with right hand threads for counterclockwise motor direction.Overall Length: 4" (101mm). Made from corrosion resistant 416 stainless steel.Mounts in 3/8" (9.5mm) capacity chuck.

$24.00

Product SKU: 2630

SCRIBER - DUAL POINT

Use as a scribe for layout work, scraping solder joints, cleaning out cracks, etc.Includes the fo...

Use as a scribe for layout work, scraping solder joints, cleaning out cracks, etc.Includes the following features: Hardened 9-D ground steel needle points Dual ends offers straight or 90° point Aluminum knurled handle Overall length 8 1/2" (216mm)

$6.51

Product SKU: 2797

FLAT HEAD BRASS HAMMER

Our #2121 Brass Hammer isdesigned for medium duty general purpose shop use. Head is machined from...

Our #2121 Brass Hammer isdesigned for medium duty general purpose shop use. Head is machined from half hard brass and fitted to a non-corrosive stainless steel shaft fitted with a nicely profiled Delrin handle.HammerDimensions:overall weight: 7 ounces (200g)overall length: 11" (2.8cm)head length: 1.375" (35mm)head diameter: 0.75" (19.05mm)

$48.00

Product SKU: 2121

ARBOR PRESS - 1/2 TON

Our 1/2 ton (0.454 tonnes) arbor press is designed for general shop use. Four position steel anvi...

Our 1/2 ton (0.454 tonnes) arbor press is designed for general shop use. Four position steel anvil with steel rams and pinions. Heavy duty, cast iron construction.Press Specifications: width: 4" (10.2 cm) length: 10" (25.4 cm) height: 9 1/2" (24.1 cm) weight: 25 lbs (11.3 kg) capacity over anvil: 4 1/2" (114mm) ram size: 3/4" square (19.05mm)

$74.98

Product SKU: 2461
×
Welcome Newcomer