BURNISHING TAPE 2" X 100' ROLL
This clear, adhesive backed, high density polyethylenetape is designed to be applied directly to ...
This clear, adhesive backed, high density polyethylenetape is designed to be applied directly to the instrument for burnishingdents. Simply wipe clean the surface to be burnished, cut off necessary length,and apply tape to dented area as needed. Practically guarantees no marring orscratching of finish.An excellent product for all silver or gold plated finishes, as well asall solid unlacquered metals. Care should be taken with lacquered finishes asaggressive burnishing may crack the lacquer an...
$18.36
RUBBER STOPPER SET - SMALL - SOLID
Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pu...
Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pure rubber, the stoppers areavailable either solid or with a hole in the center. Stoppers with a hole areused to plug up the end of the instrument that the technician would put theirmouth to.Small Set Diameter Range: 3/8" (9.5 mm) to 1" (25.4 mm)Length: 0.75" (19mm) and 1" (25.4 mm)
$5.00
RUBBER STOPPER SET - LARGE - SOLID
Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pu...
Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pure rubber, the stoppers areavailable either solid or with a hole in the center. Stoppers with a hole areused to plug up the end of the instrument that the technician would put theirmouth to.Large Set Diameter Range: 7/8" (22.2 mm) to 1 5/8" (41.3 mm)Length: 1" (25.4 mm)
$6.00
RUBBER STOPPER SET - SMALL - HOLE
Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pu...
Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pure rubber, the stoppers areavailable either solid or with a hole in the center. Stoppers with a hole areused to plug up the end of the instrument that the technician would put theirmouth to.Small Set Diameter Range: 3/8" (9.5 mm) to 1" (25.4 mm)Length: 0.75" (19mm) and 1" (25.4 mm)
$5.00
Have you ever been straightening a badly bent slide pipe and - SNAP! - theslide buckles and must ...
Have you ever been straightening a badly bent slide pipe and - SNAP! - theslide buckles and must be replaced. Ronny's Safety Rod is a high density,thermoplastic rod that inserts into the slide before bending and greatly reducesthis risk. Two diameter sizes for inner and outer pipes, the 29" long rodsare strong enough to provide support but flexible enough to not restrictbending.
$12.00
The Bobcat Mouthpiece Puller has become the standard in the industry, used worldwide by repair te...
The Bobcat Mouthpiece Puller has become the standard in the industry, used worldwide by repair technicians, professional musicians, and educators. Works on all brass instruments. Easy, safe to use design takes just seconds to remove even severely stuck mouthpieces.Sturdy construction, compact design, and no loose parts or attachments to keep track of.
$53.50
This wood parts caddy keeps trumpet, cornet and french horn slides, pistons, caps, springs etc. o...
This wood parts caddy keeps trumpet, cornet and french horn slides, pistons, caps, springs etc. organized and safe. Sturdy, solid construction made from solid oak. Handy for make plays and cleaning jobs; works great for holding parts during lacquering process. Safe to put in the oven for baked on finishes.
$36.25
VALENTINO BRASS MOUTHPIECE SHANK TOOL
Use for straightening all brass instrument mouthpiece shanks.On badly dented shanks we recommend ...
Use for straightening all brass instrument mouthpiece shanks.On badly dented shanks we recommend inserting tool into shank and using rawhide mallet to tap the shankback into round.
$48.50
RUBBER STOPPER SET - LARGE - HOLE
Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pu...
Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pure rubber, the stoppers areavailable either solid or with a hole in the center. Stoppers with a hole areused to plug up the end of the instrument that the technician would put theirmouth to.Large Set Diameter Range: 7/8" (22.2 mm) to 1 5/8" (41.3 mm)Length: 1" (25.4 mm)
$6.00
DENT ROD CLAMP - 5/8" (15.9mm)
Our Dent Rod Clamps work great for holding dent rods, knuckle tools, or mandrels securely in a st...
Our Dent Rod Clamps work great for holding dent rods, knuckle tools, or mandrels securely in a standard bench vise. Locks rod in tight to prevent slippage and also protects rods from being marred by vise jaws.The two halves of the clamp are secured together to allow easy clamping and positioning in the vise. Slides on and off rod so it can be quickly interchanged with other rods. Works for all 5/8" (15.9mm) diameter rods or mandrels.
$22.50
DENT ROD CLAMP - 1/2" (12.7mm)
Our Dent Rod Clamps work great for holding dent rods, knuckle tools, or mandrels securely in a st...
Our Dent Rod Clamps work great for holding dent rods, knuckle tools, or mandrels securely in a standard bench vise. Locks rod in tight to prevent slippage and also protects rods from being marred by vise jaws.The two halves of the clamp are secured together to allow easy clamping and positioning in the vise. Slides on and off rod so it can be quickly interchanged with other rods. Works for all 1/2" (12.7mm) diameter rods or mandrels.
$22.50
Our Dent Rod Clamps work great for holding dent rods, knuckle tools, or mandrels securely in a st...
Our Dent Rod Clamps work great for holding dent rods, knuckle tools, or mandrels securely in a standard bench vise. Locks rod in tight to prevent slippage and also protects rods from being marred by vise jaws.The two halves of the clamp are secured together to allow easy clamping and positioning in the vise. Slides on and off rod so it can be quickly interchanged with other rods. Works for all 3/8" (9.5mm) diameter rods or mandrels. Other sizes available - see below.
$22.50
1 – 12 product(s) of 12
