MISCELLANEOUS WOODWIND TOOLS

 

20 items

PAD CUP HEATER

Our Pad Cup Heater is one of the most practical and time saving tools to come into the industry i...

Our Pad Cup Heater is one of the most practical and time saving tools to come into the industry in a very long time. Used worldwide by repair technicians and manufacturers, this versatile, easy to use tool is guaranteed to significantly speed up pad work, as well as prove useful in various other types of woodwind repair. INSTANT HEATING: Hold the graphite electrodes up to the key cup and squeeze the palm trigger. A 9-10mm key cup (clarinet upper joint keys for example) will heat up to melting...

$249.85

Product SKU: 2350

FEELER GAUGE HOLDER

Our feeler gauge holder is designed for securing feeler gauge material for testing pad lev...

Our feeler gauge holder is designed for securing feeler gauge material for testing pad levelness during pad installation and seating. Knurled ring slides forward to close steel jaws for smooth, one hand operation. Nicely balanced to enhance sensitive touch. Overall length: 4.125" (10.48 cm)

$16.50

Product SKU: 6759

RUBBER STOPPER SET - SMALL - SOLID

Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pu...

Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pure rubber, the stoppers areavailable either solid or with a hole in the center. Stoppers with a hole areused to plug up the end of the instrument that the technician would put theirmouth to.Small Set Diameter Range: 3/8" (9.5 mm) to 1" (25.4 mm)Length: 0.75" (19mm) and 1" (25.4 mm)

$5.00

Product SKU: 3540

RUBBER STOPPER SET - LARGE - SOLID

Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pu...

Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pure rubber, the stoppers areavailable either solid or with a hole in the center. Stoppers with a hole areused to plug up the end of the instrument that the technician would put theirmouth to.Large Set Diameter Range: 7/8" (22.2 mm) to 1 5/8" (41.3 mm)Length: 1" (25.4 mm)

$6.00

Product SKU: 3541

CROSS LOCK TWEEZERS - CURVED TIP

Cross lock tweezers are excellent for applying adjustment corks and felts as well as for general ...

Cross lock tweezers are excellent for applying adjustment corks and felts as well as for general shop use.Made from stainless steel with heat resistant fiber grips. Normal position is closed - squeeze to open.Approximate Length: 6.5" (16.5 cm)Tip Style: curved

$4.40

Product SKU: 6761

RUBBER STOPPER SET - SMALL - HOLE

Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pu...

Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pure rubber, the stoppers areavailable either solid or with a hole in the center. Stoppers with a hole areused to plug up the end of the instrument that the technician would put theirmouth to.Small Set Diameter Range: 3/8" (9.5 mm) to 1" (25.4 mm)Length: 0.75" (19mm) and 1" (25.4 mm)

$5.00

Product SKU: 3542

PIN VISE

Nicely balanced, fluted aluminum handle with precision steel chuck.Capacity: 0 to .059" (0 to 1.5...

Nicely balanced, fluted aluminum handle with precision steel chuck.Capacity: 0 to .059" (0 to 1.5mm).Overall Length: 4-1/2" (114mm).

$11.20

Product SKU: 6758

FLUTE BODY MANDREL

Our flute body mandrel is designed for working on flute main body and foot sections. Made from hi...

Our flute body mandrel is designed for working on flute main body and foot sections. Made from high quality drill rod that is ground and polished to a roundness tolerance of ±.0005" and finished with a smooth, full radius at one end.Excellent for burnishing, hammering or rolling out dents, straightening bentbodies, rounding out tenon joints, or performing tone hole work.Diameter: 0.734" (18.64mm). Overall Length: 18" (45.7cm).

$52.00

Product SKU: 2385

JEWELER'S SAW

Our excellent quality jeweler's saws are made inGermany to exacting specifications.Features inclu...

Our excellent quality jeweler's saws are made inGermany to exacting specifications.Features include: heavy duty metal frame with comfort grip hardwood handle unique blade tensioning end screw 3" (76mm) frame depth adjusts to hold any plain end blade lengths between 2.5" and 6" (63mm to 152mm) lifetime guarantee

$23.94

Product SKU: 6550

VALENTINO FLUTE / CLARINET KEY CLAMP

Key clamps for flute and clarinet. Made from s...

Key clamps for flute and clarinet. Made from spring steel and vinyl coated to protect instrument finish. Light clamping action.

$7.00

Product SKU: 4702

STEEL BENCH BLOCK

Made from high quality tool steel, these precisionbench blocks are ground flat, polished, and cas...

Made from high quality tool steel, these precisionbench blocks are ground flat, polished, and case-hardened. A necessity on anywoodwind bench for flattening spring ends, leveling key cups, etc.Dimensions: 0.750" (19.0mm) thick 2.500" (63.5mm) square

$28.50

Product SKU: 3550

CROSS LOCK TWEEZERS - STRAIGHT TIP

Cross lock tweezers are excellent for applying adjustment corks and felts as well as for general ...

Cross lock tweezers are excellent for applying adjustment corks and felts as well as for general shop use.Made from stainless steel with heat resistant fiber grips. Normal position is closed - squeeze to open.Approximate Length: 6.5" (16.5 cm)Tip Style: straight

$3.40

Product SKU: 6760

LEAK TEST PLUG SET - CLARINET

Set contains four tapered rubber stoppers for checking for leaks in Bb soprano clarinet upper and...

Set contains four tapered rubber stoppers for checking for leaks in Bb soprano clarinet upper and lower joints.Two stoppers are solid and two have hole in center. Put solid stopper in one end of joint and stopper with hole in opposite end. Check for leaks by closing keys and blowing in stopper with hole.

$3.50

Product SKU: 3545C

PIN VISE WITH SWIVEL HEAD

Use for holding drill bits and small thread cutting taps for working in tight places. Works great...

Use for holding drill bits and small thread cutting taps for working in tight places. Works great for drilling out or rethreading body posts where clearance from body makes access difficult.Comes with two double-ended collets to provide 0 to .125" (0 to 3.2 mm) capacity. Collet not in use stores in handle end.Overall length 3 1/2" (89 mm).

$6.00

Product SKU: 6754

RUBBER STOPPER SET - LARGE - HOLE

Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pu...

Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pure rubber, the stoppers areavailable either solid or with a hole in the center. Stoppers with a hole areused to plug up the end of the instrument that the technician would put theirmouth to.Large Set Diameter Range: 7/8" (22.2 mm) to 1 5/8" (41.3 mm)Length: 1" (25.4 mm)

$6.00

Product SKU: 3543

VALENTINO EMERGENCY CLARINET CARE KIT

The Valentino Emergency Clarinet Care Kit is great for professionals and band directors for quick...

The Valentino Emergency Clarinet Care Kit is great for professionals and band directors for quick on the spot repairs.Kit contents include: selection of universal, adhesive back pads thumb rest cushion pre-cut adhesive back key corks pre-cut adhesive back joint corks screwdriver elastic key clamp pad leveling tool padding needle spring hook tool key chain knife storage case

$62.50

Product SKU: 4706

PRECISION OILER

Our precision oiler provides exact placement of keyoil. Smooth operating actuator allows for exce...

Our precision oiler provides exact placement of keyoil. Smooth operating actuator allows for excellent control.All aluminum construction with convenient pocket clip and protective screw-oncover.Overall length: 5 5/8" (14.3cm)

$23.20

Product SKU: 2822

LEAK TEST PLUG SET - FLUTE

Set contains two tapered rubber stoppers for checking for leaks in soprano flute.Put solid stoppe...

Set contains two tapered rubber stoppers for checking for leaks in soprano flute.Put solid stopper in one end of body joint and stopper with hole in opposite end. Check for leaks by closing keys and blowing in stopper with hole.

$2.00

Product SKU: 3545F

RUBBER STOPPER ASSORTMENT WITH CASE

Includes all four sets ofrubber stoppers with storage case and labels for easy identification and...

Includes all four sets ofrubber stoppers with storage case and labels for easy identification andorganization. Case is made of tough, clear, abrasion resistant K-resin highstrength copolymer. Sturdy design with hinged top.Stopper assortment includes total of28 stoppers (14 sizes with hole and 14 sizes solid).Case Dimensions: length: 11" (27.9cm) width: 6.75" (17.1cm) height: 1.75" (4.4cm)

$31.22

Product SKU: 3546

RUBBER STOPPER CASE & LABELS ONLY

Rubber stoppers not included.Storage case and labelsfor easy identification and organization of a...

Rubber stoppers not included.Storage case and labelsfor easy identification and organization of all our rubber stoppers.Case is made of tough, clear, abrasion resistant K-resin highstrength copolymer. Sturdy design with hinged top.Case Dimensions:length: 11" (27.9cm)width: 6.75" (17.1cm)height: 1.75" (4.4cm)

$8.13

Product SKU: 3547
×
Welcome Newcomer