FLUTE

15 items

WIHA NUT DRIVERS

RECOMMENDED USE: screw type: flat spring screws, pad screws instrument: Armstrong (and other) F...

RECOMMENDED USE: screw type: flat spring screws, pad screws instrument: Armstrong (and other) Flutes Votaw Tool Company is pleased to offer the Wiha™ line of screw drivers. Blades are made of high alloy vanadium-molybdenum steel specially developed for Wiha™ and are salt-bath hardened and tempered to provide optimum hardness, maximum torque transfer and exceptional durability. Chrome plating assures protection against rust and corrosion.All Wiha™ handles are molded from durable, high impac...

$7.71

Product SKU: 6735

PIN VISE

Nicely balanced, fluted aluminum handle with precision steel chuck.Capacity: 0 to .059" (0 to 1.5...

Nicely balanced, fluted aluminum handle with precision steel chuck.Capacity: 0 to .059" (0 to 1.5mm).Overall Length: 4-1/2" (114mm).

$11.20

Product SKU: 6758

FLUTE PAD ADJUSTING TOOL

Made from highly polished tool steel, our flute pad adjusting tool works great for pad leveling a...

Made from highly polished tool steel, our flute pad adjusting tool works great for pad leveling and adjustment on both open and closed hole flute pads.Thickness: 0.024" (0.60mm)Overall Length: 3.3" (84mm)

$19.25

Product SKU: 2366

CLARINET / FLUTE PAD SLICK - CONTOURED

Our clarinet and flute contoured pad slick is made from highly polished tool steel. Great for pad...

Our clarinet and flute contoured pad slick is made from highly polished tool steel. Great for pad skin ironing and pad leveling and adjustment on clarinet, oboe, flute, and piccolo.Thickness: 0.024" (0.61mm)Overall Length: 2-3/4" (70mm)

$9.85

Product SKU: 2365

VALENTINO FLUTE / CLARINET KEY CLAMP

Key clamps for flute and clarinet. Made from s...

Key clamps for flute and clarinet. Made from spring steel and vinyl coated to protect instrument finish. Light clamping action.

$7.00

Product SKU: 4702

FEELER GAUGE HOLDER

Our feeler gauge holder is designed for securing feeler gauge material for testing pad lev...

Our feeler gauge holder is designed for securing feeler gauge material for testing pad levelness during pad installation and seating. Knurled ring slides forward to close steel jaws for smooth, one hand operation. Nicely balanced to enhance sensitive touch. Overall length: 4.125" (10.48 cm)

$16.50

Product SKU: 6759

PRECISION PARALLEL JAW PLIERS

Unlike most pliers that are manufactured by casting or forging methods, our Precision Parallel Ja...

Unlike most pliers that are manufactured by casting or forging methods, our Precision Parallel Jaw Pliers are made on CNC machine equipment. Jaws, hinge mechanism, and handles are precision designed and machined to exacting specifications resulting in perfect fit and operation. Smooth faced jaws are made from rust free, non-corrosive stainless steel and measure 0.31" (8mm) wide with a depth of 1.25"(32mm). Combined with their parallel action they provide uniform pressure across their entire ...

$150.00

Product SKU: 6748

DUCKBILL PLIERS - STRAIGHT JAW

These duckbill pliers feature a straight jaw design and provide good support and control for key ...

These duckbill pliers feature a straight jaw design and provide good support and control for key straightening and adjustments. Contoured handle with cushioned grips. Dimensions: Jaw width: 0.575" (14.6mm) Jaw depth: 1.2" (30.5mm) Overall length: 6.75" (172mm)

$21.00

Product SKU: 6768

STEEL BENCH BLOCK

Made from high quality tool steel, these precisionbench blocks are ground flat, polished, and cas...

Made from high quality tool steel, these precisionbench blocks are ground flat, polished, and case-hardened. A necessity on anywoodwind bench for flattening spring ends, leveling key cups, etc.Dimensions: 0.750" (19.0mm) thick 2.500" (63.5mm) square

$28.50

Product SKU: 3550

BODY BRUSH

An excellent brush for cleaning the outside of instrument bodies. Great for getting around posts,...

An excellent brush for cleaning the outside of instrument bodies. Great for getting around posts, springs, tone holes, etc. The thick fill is made from soft yet firm pure boar bristles that hold soap and water well.Durable plastic handle and safe, non-marring nylon ferrule. Overall length: 12" (30.5cm) Brush Fill diameter: 1" (25.4mm) Brush Fill length: 2" (50.8mm)

$7.95

Product SKU: 3531

DUCKBILL PLIERS - CURVED JAW

These duckbill pliers offer broad 5/8" (16mm) wide curved jaws to provide good support and contro...

These duckbill pliers offer broad 5/8" (16mm) wide curved jaws to provide good support and control for key straightening and adjustments. Contoured handle with cushioned grips.Dimensions: Jaw width: 0.625" (16mm) Jaw depth: 1.5" (38mm) Overall length: 6.5" (168mm)

$24.00

Product SKU: 6763

FLUTE/PICCOLO TUNING ROD

At last, a tuning rod for flute and piccolo headjoints that is also designed for removing and ins...

At last, a tuning rod for flute and piccolo headjoints that is also designed for removing and inserting tuning corks. The #2424Flute/Piccolo Cork & Tuning Rod is machined from #6061 T6 aluminum, and hasa sturdy 3/8" diameter and 10" length with a nicely polished finish.Each end of the rod is marked to designate instrument and has an accurately cut,easy to read, cork positioning mark. For driving out old stuck corks, one end of the rod is drilled with a hole largeand deep enough to fit ove...

$16.50

Product SKU: 2424

SPRING CUTTERS

These precision cutters are designed specifically for cutting all spring wire and needle springs ...

These precision cutters are designed specifically for cutting all spring wire and needle springs and are far superior to standard type wire cutters.Conventional wire cutters utilize a compression type cut, with the advancing cutting edges forcing the metal of the wire out of their way. The force of this compression is evident: when the wire is severed - the tag end goes shooting off across the room and the remaining spring gets driven back toward the post (sometimes even dislodging itself fro...

$56.75

Product SKU: 6757

FLUTE BODY MANDREL

Our flute body mandrel is designed for working on flute main body and foot sections. Made from hi...

Our flute body mandrel is designed for working on flute main body and foot sections. Made from high quality drill rod that is ground and polished to a roundness tolerance of ±.0005" and finished with a smooth, full radius at one end.Excellent for burnishing, hammering or rolling out dents, straightening bentbodies, rounding out tenon joints, or performing tone hole work.Diameter: 0.734" (18.64mm). Overall Length: 18" (45.7cm).

$52.00

Product SKU: 2385

TWO HANDED ROLLER - FLUTE

Two handed roller designed for flute head and body jointsPrecision machined using corrosion resis...

Two handed roller designed for flute head and body jointsPrecision machined using corrosion resistant 416 stainless steel for the roller and aircraft grade 6061-T6 aluminum for the handles.Precision ball bearings provide smooth, free turning. Rolling action is easy to control and less likely to mar or scratch finish than standard burnishing irons.SPECIFICATIONS: overall length: 34cm (13.5") handles diameter: 25.4mm (1") roller outer diameter: 37mm (1.45") roller inner diameter: 21.5mm (0.85")...

$125.00

Product SKU: 2356
×
Welcome Newcomer