CLEANING BRUSHES / RODS / PADS

SCOTCH-BRITE™ PAD - ULTRA FINE - WHITE

The Scotch-Brite™ 7445 pad is rated ultra fine for general light duty cleaning and polishing. Use...

The Scotch-Brite™ 7445 pad is rated ultra fine for general light duty cleaning and polishing. Useful to remove tough valve piston stains that don't come out completely during the chemical flush process. Use with valve oil to lightly work the area of the stain. Do NOT use anything with a more aggressive grit to avoid scratching the piston face. Sheet Size: 6" x 9" (152mm x 229mm)

SCOTCH-BRITE™ PAD - MEDIUM - MAROON

The Scotch-Brite™ 7447 pad is useful for more aggressive cleaning applications in the shop includ...

The Scotch-Brite™ 7447 pad is useful for more aggressive cleaning applications in the shop including removal of light rust. Sheet Size: 6" x 9" (152mm x 229mm).

TUBE BRUSHES - NYLON

Each brush has an overall length of 15" (38.1cm) and is made with twisted galvanized wire and inc...

Each brush has an overall length of 15" (38.1cm) and is made with twisted galvanized wire and includes a loop end. Flexible nylon bristles are safe to instrument while still providing thorough cleaning. Sold individually or in a set of 8. Work great for the following applications: brass instruments tuning slides mouthpipes valve casings bell pipes woodwind instruments tone holes instrument bore

TROMBONE HANDSLIDE BRUSHES

Nylon brushes used for trombone handslide tubes. Sturdy galvanized wire with 1" (25.4mm) ring end...

Nylon brushes used for trombone handslide tubes. Sturdy galvanized wire with 1" (25.4mm) ring end #3512 Outer Slide Brush is vinyl coated to protect pipes Overall length: 32" (82cm) Double row, 4" ((10cm) brush part provides excellent scrubbing action

BODY BRUSH

An excellent brush for cleaning the outside of instrument bodies. Great for getting around posts,...

An excellent brush for cleaning the outside of instrument bodies. Great for getting around posts, springs, tone holes, etc. The thick fill is made from soft yet firm pure boar bristles that hold soap and water well.Durable plastic handle and safe, non-marring nylon ferrule. Overall length: 12" (30.5cm) Brush Fill diameter: 1" (25.4mm) Brush Fill length: 2" (50.8mm)

STAINLESS STEEL TUBE BRUSH - OUTSIDE

Works great for cleaning outside of tube prior to soldering. 3/8" - 1/2" (9 - 12mm) 1/2" - 5/8" ...

Works great for cleaning outside of tube prior to soldering. 3/8" - 1/2" (9 - 12mm) 1/2" - 5/8" (13 - 16mm) 3/4" - 7/8" (19 - 22mm)

BRASS WIRE BRUSHES

These brushes work well for a variety of uses in the repair shop such ascleaning and surface fini...

These brushes work well for a variety of uses in the repair shop such ascleaning and surface finishing brass parts (rotors, slide tubes, etc.) orcleaning old glue or shellac out of the cork channel on clarinet tenons.The fine brass wire strands are 0.003" (0.076mm) in diameter and aremounted on a hardwood hub with 1/4" (6.35mm) diameter hole for mounting on taperedspindle or wheel arbor. Overall diameter: 3" (76mm).

VALVE CASING CLEANING ROD

Thanks to repair technician Tony Hawks for hissuggestion to improve upon the flimsy, hard to hold...

Thanks to repair technician Tony Hawks for hissuggestion to improve upon the flimsy, hard to hold, cleaning and swabbing rodsused for valve casings.Ours has a sturdy shaft with a 5/16" (7.9mm) diameter and the 'T' handledesign offers excellent gripping and control compared to rods that have only aring on the end.Machined from stainless steel and brass, with an ABS handle, these rods arecompletely rust free and impervious to fumes and corrosives found in most shops.Extra large eyelet allows ea...