TOOLS

318 items

12" FLUORESCENT LAMP W/ CORD & PLUG

Our #8112 Fluorescent Lamp comes equipped with a 12" (305mm) lamp and a flexible yet durable 8 fo...

Our #8112 Fluorescent Lamp comes equipped with a 12" (305mm) lamp and a flexible yet durable 8 foot (2.4m) cord with a 4 pin male style plug that connects to the control unit. The cord is soldered to the lamp and solidly reinforced at the connection to deter fraying. The entire lamp tube is covered with our exclusive Safety Sleeve - a clear, tough, plastic sleeve that is permanently fitted to the lamp providing excellent protection against breakage as well as safety against flying glass shoul...

$41.88

Product SKU: 8112

NIKOLAS 2105 SPRAY LACQUER - CLEAR

Nikolas 2105 Clear Lacquer is an air drying, solvent based coating designed for all non-ferrous m...

Nikolas 2105 Clear Lacquer is an air drying, solvent based coating designed for all non-ferrous metals such as brass, silver, copper, and bronze. The aerosol spray makes this an excellent product for 'spot lacquering', offering protection from oxidation, perspiration, and abrasion. Dries to a hard transparent film. Apply thinly, waiting 10-15 minutes between coats. Full cure typically in 8 hours at room temperature. For faster cure warm to 140°F (60°C) for 30-45 minutes (denser, heavier mat...

$27.23

Product SKU: 3570

NIKOLAS 2105 SPRAY LACQUER - GOLD TINT

Nikolas 2105 Gold Tint Lacquer is an air drying, solvent based coating designed for all non-ferro...

Nikolas 2105 Gold Tint Lacquer is an air drying, solvent based coating designed for all non-ferrous metals such as brass, silver, copper, and bronze.The aerosol spray makes this an excellent product for 'spot lacquering', offering protection from oxidation, perspiration, and abrasion. Dries to a hard translucent film.Apply thinly, waiting 10-15 minutes between coats. Full cure typically in 8 hours at room temperature. For faster cure warm to 140°F (60°C) for 30-45 minutes (denser, heavier mat...

$30.80

Product SKU: 3571

20" FLUORESCENT LAMP W/ CORD & PLUG

Our #8120 Fluorescent Lamp comes equipped with a 20" (508mm) lamp and a flexible yet durable 8 fo...

Our #8120 Fluorescent Lamp comes equipped with a 20" (508mm) lamp and a flexible yet durable 8 foot (2.4m) cord with a 4 pin male style plug that connects to the control unit. The cord is soldered to the lamp and solidly reinforced at the connection to deter fraying. The entire lamp tube is covered with our exclusive Safety Sleeve - a clear, tough, plastic sleeve that is permanently fitted to the lamp providing excellent protection against breakage as well as safety against flying glass shoul...

$45.35

Product SKU: 8120

FEELER GAUGE MATERIAL .0005" SILVER

For testing pad levelness during installation and seating of bladder skin pads(clarinet, flute, e...

For testing pad levelness during installation and seating of bladder skin pads(clarinet, flute, etc.), many repair technicians prefer the accuracy provided byusing a feeler gauge over that of using a leak light.Our feeler gauge material is made of durable cellulose acetate and is an excellentmaterial for this purpose. And theultra thin .0005" thickness provides the highest accuracy.Will not tear and has low static charge buildup.Thickness is 0.0005" (0.0127mm)Silver color.Sold in 2" (5.1cm) x...

$2.00

Product SKU: 3235

FEELER GAUGE MATERIAL .001" AMBER

For testing pad levelness during installation and seating of bladder skin pads(clarinet, flute, e...

For testing pad levelness during installation and seating of bladder skin pads(clarinet, flute, etc.), many repair technicians prefer the accuracy provided byusing a feeler gauge over that of using a leak light.Our feeler gauge material is made of durable cellulose acetate and is anexcellent material for this purpose.Will not tear and has low static charge buildup.Thickness is 0.001" (0.0254mm).Amber color.Sold in 2" (5.1cm) x 5" (12.7cm) piece.Cut strips to desired width and use our FeelerGa...

$2.00

Product SKU: 3236

PAD CUP HEATER

Our Pad Cup Heater is one of the most practical and time saving tools to come into the industry i...

Our Pad Cup Heater is one of the most practical and time saving tools to come into the industry in a very long time. Used worldwide by repair technicians and manufacturers, this versatile, easy to use tool is guaranteed to significantly speed up pad work, as well as prove useful in various other types of woodwind repair. INSTANT HEATING: Hold the graphite electrodes up to the key cup and squeeze the palm trigger. A 9-10mm key cup (clarinet upper joint keys for example) will heat up to melting...

$568.00

Product SKU: 2350

MICRO INCANDESCENT LAMP

Our #8151 Micro Incandescent Lamp is a excellent choice for an all purpose light source. Although...

Our #8151 Micro Incandescent Lamp is a excellent choice for an all purpose light source. Although quite small in size, this lamp is extremely bright and can be used in Bb soprano clarinets, piccolos, flutes, oboes, saxophones, etc.Also works great for inspecting the insides of mouthpipes, valve casings, arch top guitars, violins and various other string instruments.The new plug in design replaces our older style solder-on miniature lamp. For customers who have the solder-on style we sell an u...

$3.50

Product SKU: 8151

NYLON TUBE BRUSHES - SET OF 8

Stem is constructed using twisted, galvanized, rust free wire with a loop end. Brush part made wi...

Stem is constructed using twisted, galvanized, rust free wire with a loop end. Brush part made with nylon bristles. Overall length: 15" (38cm).

$21.93

Product SKU: 3500

BURNISHING TAPE 2" X 100' ROLL

This clear, adhesive backed, high density polyethylenetape is designed to be applied directly to ...

This clear, adhesive backed, high density polyethylenetape is designed to be applied directly to the instrument for burnishingdents. Simply wipe clean the surface to be burnished, cut off necessary length,and apply tape to dented area as needed. Practically guarantees no marring orscratching of finish.An excellent product for all silver or gold plated finishes, as well asall solid unlacquered metals. Care should be taken with lacquered finishes asaggressive burnishing may crack the lacquer an...

$18.36

Product SKU: 3049

D'S T-SLIDE KNOCKEROUTER

Local Springfield, Missouri technician, Duane Lewis,designed and manufactures these handy tools u...

Local Springfield, Missouri technician, Duane Lewis,designed and manufactures these handy tools used for removing slightly stucktuning slides. The seven different sizes are shaped and contoured to coverpractically all tuning slides from trumpet and cornet on up to sousaphone.Simple to use - place contoured end against inner surface of slide crook andlightly tap with mallet. Made from solid oak with cushioned end to protect against damage to the crook.Set contains 7 different sizes.

$56.00

Product SKU: 2440

TUBE BRUSH - NYLON - 1/2" (12.7mm)

Dimensions: overall length: 15" (38.1cm) brush length: 3" (76mm) brush diameter: 1/2" (12.7mm)...

Dimensions: overall length: 15" (38.1cm) brush length: 3" (76mm) brush diameter: 1/2" (12.7mm) Stem is constructed using twisted, galvanized, rust free wire with a loop end. Brush part made with nylon bristles.

$3.48

Product SKU: 3503

LARGE INCANDESCENT CORD W/ PLUG & SOCKET

ABOUT OUR LEAK LIGHTS We offer a wide variety of leak light control units and lamps t...

ABOUT OUR LEAK LIGHTS We offer a wide variety of leak light control units and lamps to meet all the demands of the repair shop, and with versatility in mind, our leak lights can be purchased either as separate components to meet individual needs, or as a packaged system.IMPORTANT NOTE: All of our fluorescent and incandescent lamps with cord and plug require a Control Unit for operation. Our #8126 Incandescent Cord, Plug & Socket is used with our #8222 Large Incand...

$20.32

Product SKU: 8126

NIKOLAS BRUSHING LACQUER

Our brushing lacquer is perfect for small 'spotlacquering' jobs around posts, key guards, etc., a...

Our brushing lacquer is perfect for small 'spotlacquering' jobs around posts, key guards, etc., allowing precise touch upswithout overspray. Manufactured by Nikolas, a leader in brass finishing, thiseasy to use water base formula provides quick cleanup, just rinse brush out withwater.Air dry to touch in 15-20 minutes. Dries to hard, clear protective finish. Soldin 4 1/2 fl oz (133ml) bottle. SHIPPING RESTRICTIONS FOR THIS PRODUCT: Can only ship by UPS GROUND service Cannot ship by air ...

$6.48

Product SKU: 3572

GOLD TINT DYE

This is the same gold tint dye that is used in our #3571 NIKOLAS 2105 SPRAY LACQUER - GOLD TINT. ...

This is the same gold tint dye that is used in our #3571 NIKOLAS 2105 SPRAY LACQUER - GOLD TINT. Sold in 3/4 oz (22ml) bottle.Very concentrated, mixes well with most lacquers. Mix a few drops with our #3572 BRUSHING LACQUER for spot lacquer jobs where darker, richer finish is needed.SHIPPING RESTRICTIONS FOR THIS PRODUCT: Can only ship by UPS GROUND service Cannot ship by air service (Next Day, 2 Day, 3 Day) Cannot ship by USPS Postal Service or to Post Office Box Cannot ship outside the cont...

$7.62

Product SKU: 3573

SMALL INCANDESCENT LAMP

Our #8221 Small Incandescent Lamp has a bayonet style base. Similar to the old Erick Brand 'clari...

Our #8221 Small Incandescent Lamp has a bayonet style base. Similar to the old Erick Brand 'clarinet' lamp. Requires our #8125 Cord w/ Plug & Socket.Dimensions: bulb diameter: 0.437" (11.1mm) socket diameter: 0.375" (9.5mm) Will work with our #8012 and #8091 control units, as well as the following older models: #8002 #8010 #8075A #8004 #8010A #8005 #8075 About Our Leak Lights

$3.00

Product SKU: 8221

MICRO INCANDESCENT CORD & SOCKET

Durable, yet flexible 8' (2.43m) cord complete with plug andsocket for our #8151Micro Incandescen...

Durable, yet flexible 8' (2.43m) cord complete with plug andsocket for our #8151Micro Incandescent Plug-In Lamp.The #8150Micro Lamp Cord withPlug and Socket will work withall of the following Votaw Control Unit models: #8002#8004#8010#8010A#8012 #8015#8075#8075A#8091

$20.32

Product SKU: 8150

BODY BRUSH

An excellent brush for cleaning the outside of instrument bodies. Great for getting around posts,...

An excellent brush for cleaning the outside of instrument bodies. Great for getting around posts, springs, tone holes, etc. The thick fill is made from soft yet firm pure boar bristles that hold soap and water well.Durable plastic handle and safe, non-marring nylon ferrule. Overall length: 12" (30.5cm) Brush Fill diameter: 1" (25.4mm) Brush Fill length: 2" (50.8mm)

$7.95

Product SKU: 3531

SMALL INCANDESCENT CORD W/ PLUG & SOCKET

ABOUT OUR LEAK LIGHTS We offer a wide variety of leak light control units and lamps t...

ABOUT OUR LEAK LIGHTS We offer a wide variety of leak light control units and lamps to meet all the demands of the repair shop, and with versatility in mind, our leak lights can be purchased either as separate components to meet individual needs, or as a packaged system.IMPORTANT NOTE: All of our fluorescent and incandescent lamps with cord and plug require a Control Unit for operation. Our #8125 Incandescent Cord, Plug & Socket is used with our #8221 Small Incand...

$20.32

Product SKU: 8125

SCOTCH-BRITE™ PAD - FINE - GREY

The Scotch-Brite™ 7448 pad is useful for cleaning up tuning slide inner tubes, rotors, and genera...

The Scotch-Brite™ 7448 pad is useful for cleaning up tuning slide inner tubes, rotors, and general shop cleaning applications. Sheet Size: 6" x 9" (152mm x 229mm)

$2.80

Product SKU: 3591
×
Welcome Newcomer