It appears that your cart is currently empty
Handpiece constructed with pre-lubricated ball bearings that require no maintenance. Collet desig...
Handpiece constructed with pre-lubricated ball bearings that require no maintenance. Collet design works best for using cutting burs, wheels and buffs.Comes with wrench and 3 different size collets for holding the following shaftsizes:3/32" (2.38mm)......1/8" (3.17mm) ......1/4" (6.35mm)Handpiece overalllength: 5.6" (14.2cm)Handpiece diameter: 1.0" (25.4mm)Handpiece weight: 5.9 oz (167 g)Easily attaches with quick disconnect to any Foredom Flexible Shaft Power Tool.
$78.64
*DISCONTINUED*
MAGNETIC DENT REMOVAL MUSHROOM - 2.0" (50.8mm)
Designed for use with magnetic dent removal tools, these discs attach to the end of the magnet to...
Designed for use with magnetic dent removal tools, these discs attach to the end of the magnet to provide a radiused surface.Precision machined steel.Diameter: 2.0" (50.8mm)
$15.00
MAGNETIC DENT REMOVAL MUSHROOM - 1.625" (41.3mm)
Designed for use with magnetic dent removal tools,these discs attach to the end of the magnet to ...
Designed for use with magnetic dent removal tools,these discs attach to the end of the magnet to provide a radiused surface.Precision machined steel.Diameter: 1.625" (41.3mm)
$15.00
Precision stainless steel rule. Includes pocket clip thatfunctions as depth or height gauge.SPECI...
Precision stainless steel rule. Includes pocket clip thatfunctions as depth or height gauge.SPECIFICATIONS: length: 6" (150mm) width: 15/32" (12mm) graduation: edge A: 0.5mm edge B: 1.0mm
$3.08
Precision stainless steel rule. Includes pocket clip thatfunctions as depth or height gauge. Back...
Precision stainless steel rule. Includes pocket clip thatfunctions as depth or height gauge. Back side lists fractional to decimal equivalents.SPECIFICATIONS: length: 6" (150mm) width: 15/32" (12mm) graduation: edge A: 1/32" edge B: 1/64"
$3.18
*DISCONTINUED*
PILOT BUSHING - CENTER TENON - VITO
Designed to work on Vito Bb soprano plastic clarinet upper joints when counterboring for center t...
Designed to work on Vito Bb soprano plastic clarinet upper joints when counterboring for center tenon replacement.Machined from high density plastic with 3/16" (4.76mm) diameter pilot hole.Outside diameter: 0.584" (14.8mm). TenonReplacement Helpful Tips TenonReplacement Tooling
$12.00
*DISCONTINUED*
PILOT BUSHING - CENTER TENON - ARTLEY
Designed to work on Artley Bb soprano plastic clarinet upper joints when counterboring for center...
Designed to work on Artley Bb soprano plastic clarinet upper joints when counterboring for center tenon replacement. Machined from high density plastic with 3/16" (4.76mm) diameter pilot hole. Outside diameter: 0.572" (14.5mm).
$12.00
STANDARD SOLDERING FIXTURE ADDITIONAL ARM
Additional arm for use with our #2775 Standard Soldering Fixture when soldering applications requ...
Additional arm for use with our #2775 Standard Soldering Fixture when soldering applications require a third clamp. Easily attaches to the fixture base.
$78.00
Our #2775 Standard Soldering Fixture offers an affordable alternative to our #2200 Professional S...
Our #2775 Standard Soldering Fixture offers an affordable alternative to our #2200 Professional Soldering Fixture.Arms are machined from hefty 1/2" (12.7mm) aluminum rod which provides plenty of support and eliminates the unwanted spring-like action found with thinner steel arms. Each arm is designed with 4 pivot points, allowing for maximum positioning flexibility. Overall arm extension is a generous 11" (28cm), giving extra flexibility for clamping setup as well as for holding parts like sa...
$180.00
BEARING MODULE RETAINING NUT (REPLACEMENT)
Replacement retaining nut for #2251N Bearing Module
Replacement retaining nut for #2251N Bearing Module
$2.00
Our clarinet pad slick is made from non-corrosive, spring temper, stainless steel. Handy tool for...
Our clarinet pad slick is made from non-corrosive, spring temper, stainless steel. Handy tool for all pad leveling and adjustment on clarinet, oboe, flute, and piccolo. Includes notch for fork key cork installation.Thickness: 0.031" (0.79mm) Overall Length: 3" (76mm)
$4.50
*DISCONTINUED*
Our #2391 Disc Sander is designed to trim and square up the ends of key hinges, hinge rods (long ...
Our #2391 Disc Sander is designed to trim and square up the ends of key hinges, hinge rods (long screws), slide pipes, brass tube, etc. Designed for fast setup, simply clamp bottom recessed area of chassis into standard bench vise and sander is ready to use.For hinge rods and tubing, use any of the four different sized 'V' slots located on the carriage top. To accommodate various key shapes, position one or both key saddles into the desired carriage holes to support the key hinge. Bring end t...
$125.00
For use with chuck style Foredom handpiece.
For use with chuck style Foredom handpiece.
$8.95
*DISCONTINUED*
Our Punch and Thread Cutting Tool is an excellentaddition to any woodwind bench. Precision design...
Our Punch and Thread Cutting Tool is an excellentaddition to any woodwind bench. Precision designed and constructed to perform the followingtasks: key pin removal and installation thread cutting hinge rods flattening ends of needle springs Comes complete with: Main tool frame Drill chuck - open bore - capacity 0.015" - 0.25" (0.4mm - 6.5mm) 3 Key pin punches 3 Key hinge bases - 2 'V' blocks and 1 lead block Hammer punch & Anvil base - tool steel for ...
$270.00
*DISCONTINUED*
Our thanks to technician Mike Webb for coming up with this great idea for help in straightening b...
Our thanks to technician Mike Webb for coming up with this great idea for help in straightening bell rims.Machined from 2" (51mm) thick UHMW plastic, these blocks provide a solid, flat surface for straightening alto saxophone and other small bells. Cut-out area in side allows for narrow, focused work range as well as clearance for alto saxophone bell key levers.Clamps in any standard bench vise.Diameter: 6" (152mm).For other larger bells we offer #2388 BELL RIM BLOCK - LARGE.
$90.10
REPLACEMENT BELL TENON - NORMANDY - EBONITE (OLD)
Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both...
Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both the bore size and corresponding receiver of many popular Bb clarinet models. If you currently do your own tenon repairs, these tenons will greatly speed up the job at a very reasonable price. Simply counterbore body and glue in tenon (we recommend our #3212 extra thick cyanoacrylate with #3213 accelerator). Bore surface may need to be slightly smoothed or feathered in. Dimensions:A: 0.837" (21.26...
$31.00
REPLACEMENT BELL TENON - VITO - EBONITE (OLD)
Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both...
Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both the bore size and corresponding receiver of many popular Bb clarinet models. If you currently do your own tenon repairs, these tenons will greatly speed up the job at a very reasonable price. Simply counterbore body and glue in tenon (we recommend our #3212 extra thick cyanoacrylate with #3213 accelerator). Bore surface may need to be slightly smoothed or feathered in. Dimensions:A: 0.785" (19.94...
$31.00
RUBBER STOPPER CASE & LABELS ONLY
Rubber stoppers not included.Storage case and labelsfor easy identification and organization of a...
Rubber stoppers not included.Storage case and labelsfor easy identification and organization of all our rubber stoppers.Case is made of tough, clear, abrasion resistant K-resin highstrength copolymer. Sturdy design with hinged top.Case Dimensions:length: 11" (27.9cm)width: 6.75" (17.1cm)height: 1.75" (4.4cm)
$8.13
MOTOR REPLACEMENT BRUSHES (LEESON)
Replacement armature brushes for models #2620 or #2621 Universal Bench Motor with motors manufact...
Replacement armature brushes for models #2620 or #2621 Universal Bench Motor with motors manufacturered by Leeson (motor will have label indicating manufacturer). Sold per pair.
$25.25
*DISCONTINUED*
LOMAX MOUTHPIECE MEASURING KIT
From repair shop technicians and mouthpiece manufacturers to professional players and educators, ...
From repair shop technicians and mouthpiece manufacturers to professional players and educators, the Lomax Mouthpiece Measuring Kit is a 'must have' item for anyone interested in making quick, accurate measurements of woodwind mouthpiece tip openings, as well as determine facing specifications. Built in collaboration with woodwind mouthpiece maker Michael Lomax, upon whose initial concept the tool is designed, we are confident this kit will soon become a standard in the industry. TIP OPENIN...
$275.00