TENON REPLACEMENT

13 items

REPLACEMENT CENTER TENON - VITO

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both...

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both the bore size and corresponding receiver of many popular Bb clarinet models. If you currently do your own tenon repairs, these tenons will greatly speed up the job at a very reasonable price. Simply counterbore body and glue in tenon (we recommend our #3212 extra thick cyanoacrylate with #3213 accelerator). Bore surface may need to be slightly smoothed or feathered in. Dimensions:A: 0.592" (15.04...

$31.00

Product SKU: 3560C13

REPLACEMENT CENTER TENON - BUNDY / SELMER

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both...

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both the bore size and corresponding receiver of many popular Bb clarinet models. If you currently do your own tenon repairs, these tenons will greatly speed up the job at a very reasonable price. Simply counterbore body and glue in tenon (we recommend our #3212 extra thick cyanoacrylate with #3213 accelerator). Bore surface may need to be slightly smoothed or feathered in. Dimensions:A: 0.613" (15.57...

$31.00

Product SKU: 3560C11

CARBIDE COUNTERBORE - 13/16" (20.64mm)

Use for counterboring upper joints on Bb soprano clarinets for installation of any of our pre-cut...

Use for counterboring upper joints on Bb soprano clarinets for installation of any of our pre-cut center tenons. The carbide tipped cutters are brazed to a hardened alloy steel body and will far outlast and outperform counterbores made from high speed steel, especially when cutting on the highly abrasive plastics used on most instrument bodies.Requires a 3/16" (4.76mm) counterbore pilot and a pilot bushing. Made in the U.S.A. Diameter: 13/16" (20.64mm) Shank Diameter: 1/4" (6.35mm) Pilot Hole...

$94.68

Product SKU: 6825

PILOT BUSHING - BELL TENON

Machined from solid brass, our bell tenon pilot bushing is designed and tapered to work on any of...

Machined from solid brass, our bell tenon pilot bushing is designed and tapered to work on any of the plastic body, Bb soprano clarinets listed below, as well as many other models. Takes 3/16" (4.76mm) counterbore pilot. Artley Bundy and Selmer (new and older ebonite) Normandy (older models using ebonite) Vito (new and older ebonite) Yamaha TenonReplacement Helpful Tips TenonReplacement Tooling

$22.00

Product SKU: 3561

REPLACEMENT BELL TENON - YAMAHA

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both...

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both the bore size and corresponding receiver of many popular Bb clarinet models. If you currently do your own tenon repairs, these tenons will greatly speed up the job at a very reasonable price. Simply counterbore body and glue in tenon (we recommend our #3212 extra thick cyanoacrylate with #3213 accelerator). Bore surface may need to be slightly smoothed or feathered in. Dimensions:A: 0.782" (19.86...

$31.00

Product SKU: 3560B15

REPLACEMENT BELL TENON - ARTLEY

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both...

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both the bore size and corresponding receiver of many popular Bb clarinet models. If you currently do your own tenon repairs, these tenons will greatly speed up the job at a very reasonable price. Simply counterbore body and glue in tenon (we recommend our #3212 extra thick cyanoacrylate with #3213 accelerator). Bore surface may need to be slightly smoothed or feathered in. Dimensions:A: 0.797" (20.24...

$31.00

Product SKU: 3560B12

CARBIDE COUNTERBORE - 1" (25.4mm)

Use for counterboring lower joints on Bb soprano clarinets for installation of any of our pre-cut...

Use for counterboring lower joints on Bb soprano clarinets for installation of any of our pre-cut bell tenons. The carbide tipped cutters are brazed to a hardened alloy steel body and will far outlast and outperform counterbores made from high speed steel, especiallywhen cutting on the highly abrasive plastics used on most instrument bodies.Requires a 3/16" (4.76mm) counterbore pilot and a pilot bushing. Made in the U.S.A. Diameter: 1" (25.4mm) Shank Diameter: 1/4" (6.35mm) Pilot Hole Diamete...

$114.63

Product SKU: 6826

REPLACEMENT CENTER TENON - ARTLEY

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both...

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both the bore size and corresponding receiver of many popular Bb clarinet models. If you currently do your own tenon repairs, these tenons will greatly speed up the job at a very reasonable price. Simply counterbore body and glue in tenon (we recommend our #3212 extra thick cyanoacrylate with #3213 accelerator). Bore surface may need to be slightly smoothed or feathered in. Dimensions:A: 0.606" (15.4m...

$31.00

Product SKU: 3560C12

REPLACEMENT BELL TENON - BUNDY - EBONITE (OLD)

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both...

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both the bore size and corresponding receiver of many popular Bb clarinet models. If you currently do your own tenon repairs, these tenons will greatly speed up the job at a very reasonable price. Simply counterbore body and glue in tenon (we recommend our #3212 extra thick cyanoacrylate with #3213 accelerator). Bore surface may need to be slightly smoothed or feathered in. Dimensions:A: 0.857" (21.77...

$31.00

Product SKU: 3560B14

PILOT BUSHING - CENTER TENON - BUNDY / SELMER

Designed to work on Bundy and Selmer Bb soprano plastic clarinet upper joints when counterboring ...

Designed to work on Bundy and Selmer Bb soprano plastic clarinet upper joints when counterboring for center tenon replacement.Machined from high density plastic with 3/16" (4.76mm) diameter pilot hole.Outside diameter: 0.588" (14.9mm). TenonReplacement Helpful Tips TenonReplacement Tooling

$12.00

Product SKU: 3562

ABS ROD – BLACK

ABS (acrylonitrile butadiene styrene) is a copolymer plastic with excellent strength and adhesion...

ABS (acrylonitrile butadiene styrene) is a copolymer plastic with excellent strength and adhesion properties for tenon and tone hole replacement on plastic and wood body instruments. We recommend using our #3211 Superglue with #3213 Accelerator. Available in 4 diameter sizes. Sold by the running foot (30.5cm). Note that we generally ship material in 1 foot (30.5cm) lengths. If ordering 2 feet (61cm) or more of one size and want continuous length please specify in the 'Comments' box during che...

$0.00

Product SKU: 3130-3136

REPLACEMENT BELL TENON - NORMANDY - EBONITE (OLD)

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both...

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both the bore size and corresponding receiver of many popular Bb clarinet models. If you currently do your own tenon repairs, these tenons will greatly speed up the job at a very reasonable price. Simply counterbore body and glue in tenon (we recommend our #3212 extra thick cyanoacrylate with #3213 accelerator). Bore surface may need to be slightly smoothed or feathered in. Dimensions:A: 0.837" (21.26...

$31.00

Product SKU: 3560B17

REPLACEMENT BELL TENON - VITO - EBONITE (OLD)

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both...

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both the bore size and corresponding receiver of many popular Bb clarinet models. If you currently do your own tenon repairs, these tenons will greatly speed up the job at a very reasonable price. Simply counterbore body and glue in tenon (we recommend our #3212 extra thick cyanoacrylate with #3213 accelerator). Bore surface may need to be slightly smoothed or feathered in. Dimensions:A: 0.785" (19.94...

$31.00

Product SKU: 3560B16
×
Welcome Newcomer