CLARINET

33 items

FEELER GAUGE MATERIAL .0005" SILVER

For testing pad levelness during installation and seating of bladder skin pads(clarinet, flute, e...

For testing pad levelness during installation and seating of bladder skin pads(clarinet, flute, etc.), many repair technicians prefer the accuracy provided byusing a feeler gauge over that of using a leak light.Our feeler gauge material is made of durable cellulose acetate and is an excellentmaterial for this purpose. And theultra thin .0005" thickness provides the highest accuracy.Will not tear and has low static charge buildup.Thickness is 0.0005" (0.0127mm)Silver color.Sold in 2" (5.1cm) x...

$2.00

Product SKU: 3235

FEELER GAUGE MATERIAL .001" AMBER

For testing pad levelness during installation and seating of bladder skin pads(clarinet, flute, e...

For testing pad levelness during installation and seating of bladder skin pads(clarinet, flute, etc.), many repair technicians prefer the accuracy provided byusing a feeler gauge over that of using a leak light.Our feeler gauge material is made of durable cellulose acetate and is anexcellent material for this purpose.Will not tear and has low static charge buildup.Thickness is 0.001" (0.0254mm).Amber color.Sold in 2" (5.1cm) x 5" (12.7cm) piece.Cut strips to desired width and use our FeelerGa...

$2.00

Product SKU: 3236

STICK SHELLAC - AMBER

For many years shellac was the standard adhesive for woodwind pad installation. Although recent d...

For many years shellac was the standard adhesive for woodwind pad installation. Although recent developments in thermoplastic (hot melt) glues, such as our Surduzstik, provide many desirable qualities for pad work, there are still technicians who prefer the working characteristics found with shellac.Likewise, some players discern a more favorable tonal quality as a result of using shellac, and also find a more firm, defined tactile response on key closure provided by the harder shellac over t...

$8.87

Product SKU: 3096

UHMW SHEET - 0.010" (0.254mm)

UHMW (ultra high molecular weight) isa material that provides the low friction characteristics of...

UHMW (ultra high molecular weight) isa material that provides the low friction characteristics of teflon plus offerstwo additional features that make it a superior product for use in the repair shop:Superior Abrasion ResistanceUHMW has a higher resistance to breakdown and wear making it more durablefor dent work as well as less likely to imbed itself with dirt or grit.Adhesive BackedSimply wipe clean the surface of the tool or part, cut UHMW to size,peel off the backing and press on. The high...

$9.10

Product SKU: 3050

RUBBER STOPPER SET - SMALL - SOLID

Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pu...

Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pure rubber, the stoppers areavailable either solid or with a hole in the center. Stoppers with a hole areused to plug up the end of the instrument that the technician would put theirmouth to.Small Set Diameter Range: 3/8" (9.5 mm) to 1" (25.4 mm)Length: 0.75" (19mm) and 1" (25.4 mm)

$5.00

Product SKU: 3540

DUALL THINNER - 32 oz. (946 ml) CAN

DUALL #88 THINNER is used for thinning DUALL corkcement when the cement has gotten too thick to e...

DUALL #88 THINNER is used for thinning DUALL corkcement when the cement has gotten too thick to easily work with (usually theresult of leaving the lid off of the can with the cement exposed to air). Simply add small amount to cement and stir in. Available only in 32 oz. (946 ml) can. SHIPPING RESTRICTIONS FORTHIS PRODUCT:* Can only be shipped by UPS GROUND* Cannot ship by US Postal Service or any air express service* Cannot ship outside the continental United States Safety Data SheetNote: Ado...

$56.50

Product SKU: 3221

THREADLOCKER - TUBE 6 ml.

This is a low strength thread locking solution specially designed for use on small size screws. T...

This is a low strength thread locking solution specially designed for use on small size screws. Threadlocker is an excellent remedy for all types of pivot screws, flute adjusting or regulating screws, or any type of screw thaat is apt to move due to key movement or resonant vibrations. Simply apply one drop to the final 2-3 threads and tighten the screw in normal manner. Threadlocker will provide enough strength to hold the screw snugly in position, yet still easily allow future removal or r...

$12.15

Product SKU: 3060

RUBBER STOPPER SET - LARGE - SOLID

Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pu...

Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pure rubber, the stoppers areavailable either solid or with a hole in the center. Stoppers with a hole areused to plug up the end of the instrument that the technician would put theirmouth to.Large Set Diameter Range: 7/8" (22.2 mm) to 1 5/8" (41.3 mm)Length: 1" (25.4 mm)

$6.00

Product SKU: 3541

STICK SHELLAC - WHITE

For many years shellac was the standard adhesive for woodwind pad installation. Although recent d...

For many years shellac was the standard adhesive for woodwind pad installation. Although recent developments in thermoplastic (hot melt) glues, such as our Surduzstik, provide many desirable qualities for pad work, there are still technicians who prefer the working characteristics found with shellac.Likewise, some players discern a more favorable tonal quality as a result of using shellac, and also find a more firm, defined tactile response on key closure provided by the harder shellac over t...

$8.87

Product SKU: 3097

RUBBER STOPPER SET - SMALL - HOLE

Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pu...

Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pure rubber, the stoppers areavailable either solid or with a hole in the center. Stoppers with a hole areused to plug up the end of the instrument that the technician would put theirmouth to.Small Set Diameter Range: 3/8" (9.5 mm) to 1" (25.4 mm)Length: 0.75" (19mm) and 1" (25.4 mm)

$5.00

Product SKU: 3542

HAGERTY SILVERSMITH POLISH - BOTTLE

This liquid polish is a standard in the industry for hand polishing instruments with a bright sil...

This liquid polish is a standard in the industry for hand polishing instruments with a bright silver finish.Unique tarnish preventative will deter tarnishing 10 times longer than othersilver polishes.8 fl. oz. (237ml) plastic squeeze bottle. Apply with soft cotton cloth.Also available in new improved aerosol spray can.

$14.00

Product SKU: 3530

LEAK TEST PLUG SET - CLARINET

Set contains four tapered rubber stoppers for checking for leaks in Bb soprano clarinet upper and...

Set contains four tapered rubber stoppers for checking for leaks in Bb soprano clarinet upper and lower joints.Two stoppers are solid and two have hole in center. Put solid stopper in one end of joint and stopper with hole in opposite end. Check for leaks by closing keys and blowing in stopper with hole.

$3.50

Product SKU: 3545C

RUBBER STOPPER SET - LARGE - HOLE

Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pu...

Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pure rubber, the stoppers areavailable either solid or with a hole in the center. Stoppers with a hole areused to plug up the end of the instrument that the technician would put theirmouth to.Large Set Diameter Range: 7/8" (22.2 mm) to 1 5/8" (41.3 mm)Length: 1" (25.4 mm)

$6.00

Product SKU: 3543

HAGERTY SILVERSMITH POLISH - NEW IMPROVED AEROSOL

This liquid polish is a standard in the industry for hand polishing instruments with a bright sil...

This liquid polish is a standard in the industry for hand polishing instruments with a bright silver finish.Unique tarnish preventative will deter tarnishing 10 times longer than othersilver polishes.New improved aerosol spray can. 8.5 fl. oz. (241ml).Also available in plastic squeeze bottle.SHIPPING RESTRICTIONS FORTHIS PRODUCT:* Can only be shipped by UPS Ground* Cannot ship by US Postal Service or any air express service* Cannot ship outside the continental United States

$23.00

Product SKU: 3529

NO STIK GLUE PAD - 8"x 8" (21cm x 21cm)

Great for laying partially melted glue sticks on while doing pad work, or for setting under glue ...

Great for laying partially melted glue sticks on while doing pad work, or for setting under glue gun to catch drips. Hot glue will not stick to this surface.

$7.80

Product SKU: 3089

HOT MELT GLUE – SURDUZSTIK

Votaw Tool Company is pleased to offer to our customers SURDUZSTIK, a hot glue that we have had s...

Votaw Tool Company is pleased to offer to our customers SURDUZSTIK, a hot glue that we have had specially formulated as a pad adhesive. Unlike most hot glue adhesives, SURDUZSTIK has a viscosity / temperature profile that allows high flow rate and fast setup, qualities that enhance pad installation and seating. And because it has minimal tendency to 'string out' it is also less messy to use during application to pad or pad cup. Apply with either hot glue gun or with an open flame. Because it ...

$4.88

Product SKU: 3080

REPLACEMENT CENTER TENON - VITO

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both...

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both the bore size and corresponding receiver of many popular Bb clarinet models. If you currently do your own tenon repairs, these tenons will greatly speed up the job at a very reasonable price. Simply counterbore body and glue in tenon (we recommend our #3212 extra thick cyanoacrylate with #3213 accelerator). Bore surface may need to be slightly smoothed or feathered in. Dimensions:A: 0.592" (15.04...

$31.00

Product SKU: 3560C13

REPLACEMENT CENTER TENON - BUNDY / SELMER

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both...

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both the bore size and corresponding receiver of many popular Bb clarinet models. If you currently do your own tenon repairs, these tenons will greatly speed up the job at a very reasonable price. Simply counterbore body and glue in tenon (we recommend our #3212 extra thick cyanoacrylate with #3213 accelerator). Bore surface may need to be slightly smoothed or feathered in. Dimensions:A: 0.613" (15.57...

$31.00

Product SKU: 3560C11

VALENTINO CLARINET THUMB REST CUSHION (10 pack)

Adhesive backed, clarinet thumb rest cushion. Simply peel off back and apply to thumb rest. Stron...

Adhesive backed, clarinet thumb rest cushion. Simply peel off back and apply to thumb rest. Strong adhesive. Sold in packs of 10.

$8.30

Product SKU: 4775

REPLACEMENT BELL TENON - YAMAHA

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both...

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both the bore size and corresponding receiver of many popular Bb clarinet models. If you currently do your own tenon repairs, these tenons will greatly speed up the job at a very reasonable price. Simply counterbore body and glue in tenon (we recommend our #3212 extra thick cyanoacrylate with #3213 accelerator). Bore surface may need to be slightly smoothed or feathered in. Dimensions:A: 0.782" (19.86...

$31.00

Product SKU: 3560B15
×
Welcome Newcomer