DENT REMOVAL

14 items

BARREL DENT BALLS - SET OF 150

Setting a new standard in the industry, our BARREL DENT BALL SET offers technicians the most prec...

Setting a new standard in the industry, our BARREL DENT BALL SET offers technicians the most precision set of dent balls available. State of the art machining equipment and technique allow us to produce balls more accurately sized and more finely incremented than any other dent balls on the market. In addition to the fine increment sizing which eliminates 'wishing you had that in-between size', we have included all of the essential features to greatly improve and speed up dent work and aid in...

$750.00

Product SKU: 2491

STRAIGHT BURNISHER - 8"

Premium Grade Tool Steel Highly Polished Width: 7/8" (22.3mm) Standard 2" Length Tang

Premium Grade Tool Steel Highly Polished Width: 7/8" (22.3mm) Standard 2" Length Tang

$46.97

Product SKU: 2881

STRAIGHT BURNISHER - 10"

Premium Grade Tool Steel Highly Polished Width: 1" (25.4mm) Standard 2" Length Tang

Premium Grade Tool Steel Highly Polished Width: 1" (25.4mm) Standard 2" Length Tang

$59.20

Product SKU: 2880

SMALL CROOK DENT ROD - STRAIGHT

Great for small and medium bore brass instrument slide crooks.Precision built from non-corrosive ...

Great for small and medium bore brass instrument slide crooks.Precision built from non-corrosive stainless steel.Thread size: 1/4-20.Approximate overall length: 9-1/2" (24cm).Shaft diameter: 3/8" (9.5mm) tapering down to 1/4" (6.4mm).See our #2759 DENT ROD CLAMP or #2292 UNIVERSAL VISE JAWS for easy, secure mounting in a vise.Works well with our #2475 FLAT SIDE DENT BALL SET OF 30 or any dent ball with 1/4-20 thread size.

$25.00

Product SKU: 2758

DENT HAMMER - LIGHT / MEDIUM DUTY - NARROW

Our new #2129 model hammer works well on small and medium bore instruments: trumpets, french horn...

Our new #2129 model hammer works well on small and medium bore instruments: trumpets, french horn, etc. While both faces of the head have the same 3/4" (19mm) radius profile as the #2125 model hammer, we have 'sliced' of the sides of the faces to bring the face width down to 0.5" (13mm to allow access in tight areas..The hammer head is precision machined from non-corrosive, rust free, 303 stainless steel and polished to a fine finish. The hammer shaft is machined from 6066 T6 aluminum and fit...

$54.00

Product SKU: 2129

VALENTINO BRASS MOUTHPIECE SHANK TOOL

Use for straightening all brass instrument mouthpiece shanks.On badly dented shanks we recommend ...

Use for straightening all brass instrument mouthpiece shanks.On badly dented shanks we recommend inserting tool into shank and using rawhide mallet to tap the shankback into round.

$48.50

Product SKU: 4703

BARREL DENT BALLS - SET OF 63

Our #2486 BARREL DENT BALL SET offers the beginning shop an excellent solution for dent removal o...

Our #2486 BARREL DENT BALL SET offers the beginning shop an excellent solution for dent removal on trumpet, trombone, and other small and medium size brass instruments. Affordably priced, the set is built with the same precision and design features as our larger #2491 set to effectively remove dents from trumpet bell pipe crooks, trombone tuning slide crooks, as well as many other bent tubing applications. FEATURES INCLUDE: Each ball has a 0.171" (4.3mm) through hole for easy attachment t...

$245.00

Product SKU: 2486

TRUMPET BELL STEM MANDREL

Precision machined from rust free stainless steel our #2280 Trumpet Bell Stem Mandrel is designed...

Precision machined from rust free stainless steel our #2280 Trumpet Bell Stem Mandrel is designed to provide good coverage for working out dents along the bell pipe between the tuning slide to bell brace and the bell crook.Dimensions: Overall Length: 24" (61cm) Working Length: 12" (30.5cm) Diameter: Overall Diameter: 1.25" (32mm) Working Length (approximate): 0.5" to 1" (12.7mm to 25.4mm)

$127.50

Product SKU: 2280

ROLLER CONE 2" x 4" (51mm x 102mm)

Made from high density thermoplastic this cone is precision machined and polished with full radiu...

Made from high density thermoplastic this cone is precision machined and polished with full radiused end. Mounting stem is made from rust free stainless steel. Designed for bell flares on trumpet, cornet, and other small bore instruments. Diameter: 2" tapering to 0.5" (52mm - 13mm) Length (not including mounting stem): 4" (102mm) Note: this item requires #2251N Bearing Module for operation.See all Modular Roller Dent Roller System Components About our Modular Dent Roller System

$79.00

Product SKU: 2265N

*DISCONTINUED*

ROLLER CONE CONCAVE 2" x 3" (51mm x 76mm)

Made from high quality rust resistant stainless steel this cone is precision machined and polishe...

Made from high quality rust resistant stainless steel this cone is precision machined and polished with full radiused end. Designed for bell flares on trumpet and cornet. Concave profile works well for burnishing. Diameter: 2" tapering to 0.5" (52mm - 13mm) Length (not including mounting stem): 3" (76mm) Note: this item requires #2251N Bearing Module for operation.See all Modular Roller Dent Roller System Components About our Modular Dent Roller System

$85.00

Product SKU: 2259N

TWO HANDED ROLLER - SMALL BRASS

Two handed roller designed for small brass instrument bell pipes such as trumpets and cornets.Pre...

Two handed roller designed for small brass instrument bell pipes such as trumpets and cornets.Precision machined using corrosion resistant 416 stainless steel for the roller and aircraft grade 6061-T6 aluminum for the handles.Precision ball bearings provide smooth, free turning. Rolling action is easy to control and less likely to mar or scratch finish than standard burnishing irons.SPECIFICATIONS: overall length: 35.5cm (14") handles diameter: 25.4mm (1") roller outer diameter: 37mm (1.45") ...

$125.00

Product SKU: 2355

*DISCONTINUED*

ROLLER CONE CONCAVE 3" x 4" (76mm x 102mm)

Made from high density thermoplastic this cone is precision machined and polished with full radiu...

Made from high density thermoplastic this cone is precision machined and polished with full radiused end. Mounting stem is made from rust free stainless steel. Designed for bell flares on trumpet, cornet, trombone, and other small to medium bore instruments. Concave profile works well for burnishing. Diameter: 3" tapering to 0.8" (76mm - 20mm) Length (not including mounting stem): 4" (102mm) Note: this item requires #2251N Bearing Module for operation.See all Modular Roller Dent Roller Syste...

$93.50

Product SKU: 2266N

ROLLER MANDREL TAPERED 3/4" x 8" (19mm x 23cm)

Made from rust free stainless steel this mandrel is precision machined and polished with full rad...

Made from rust free stainless steel this mandrel is precision machined and polished with full radiused end. Works great for getting down inside bell throat of trumpet and other small bore bore instruments. Diameter: 0.75" (19mm) tapering to x 0.375" (9.5mm) Working Length (not including mounting stem): 8" (20cm) Note: this item requires #2251N Bearing Module for operation.See all Modular Roller Dent Roller System Components About our Modular Dent Roller System

$83.40

Product SKU: 2263N

*DISCONTINUED*

ROLLER MANDREL 3/4" x 10" (19mm x 25cm)

Made from rust free stainless steel this mandrel is precision machined and polished with full rad...

Made from rust free stainless steel this mandrel is precision machined and polished with full radiused end. Works well for trumpet, trombone, and other small bore instruments. Diameter: 0.75" (19mm) Working Length (not including mounting stem): 10" (25cm) Note: this item requires #2251N Bearing Module for operation.See all Modular Roller Dent Roller System Components About our Modular Dent Roller System

$51.60

Product SKU: 2261N
×
Welcome Newcomer