It appears that your cart is currently empty
Order online or call us 888-922-6030
LEAK LIGHTS
Votaw Tool Company was first to develop the fluorescent leak light for use with musical instrument repair, and today it has become a standard in the industry, for both repair technicians as well as manufacturers. Fluorescent lamps are the most efficient and effective light source for pad work. They emit a steady white light with low heat and can illuminate entire sections of an instrument at once. We offer a wide variety of leak light control units and lamps to meet all the demands of the repair shop, and with versatility in mind, our leak lights can be purchased either as separate components to meet individual needs, or as a packaged system.
Our #8222 Large Incandescent Lamp has a bayonet style base. Similar to the old Erick Brand 'saxop...
Our #8222 Large Incandescent Lamp has a bayonet style base. Similar to the old Erick Brand 'saxophone' lamp. Requires our #8126 Cord w/ Plug & Socket.Dimensions: bulb diameter: 0.750" (19mm) socket diameter: 0.600" (15mm) Will work with our #8012 and #8091 control units, as well as the following older models: #8004 #8010A #8005 #8075 #8010 #8075A About Our Leak Lights
$3.00
Product SKU:
8222
This shrink tube is used to cover the pins and wire connections of the two ends of fluorescent tu...
This shrink tube is used to cover the pins and wire connections of the two ends of fluorescent tubes. Sold in pair.
$2.50
Product SKU:
8133
Our Lamplockers are the perfect solution for keeping leak light lamps inposition while working on...
Our Lamplockers are the perfect solution for keeping leak light lamps inposition while working on the instrument and also prevent lamps from falling outof the instrument onto the floor.Made from safe, non-marring rubber, Lamplockers areslotted to easily slip over the lamp cord and are then insert into the neckreceiver or bore of the instrument. The hole through the center of theLamplocker is large enough to allow the cord to easily slide through it forrepositioning of lamp yet provides enough...
$17.50
Product SKU:
8250
INCANDESCENT LAMP - WEDGE STYLE BASE
Incandescent lamp with wedge style base for use on old style #8104 (discontinued) cord, plug, and...
Incandescent lamp with wedge style base for use on old style #8104 (discontinued) cord, plug, and jack. Rated 6.3 volt.
$1.00
Product SKU:
8202
MICRO INCANDESCENT LAMP - UPGRADE KIT
For customers who have our older #8100 solder-on style miniature lamp this upgradekit will conver...
For customers who have our older #8100 solder-on style miniature lamp this upgradekit will convert your existing cord to our new plug-inmicro lamp.Kit includes: socket, lamp, heat shrink, and instructions. Easy installation.
$9.00
Product SKU:
8155
Now standard on all Votaw Tool Company fluorescent lamps is Safety Sleeve, a clear, tough, prot...
Now standard on all Votaw Tool Company fluorescent lamps is Safety Sleeve, a clear, tough, protective plastic sleeve that ispermanently fitted to the lamp providing excellent protection against breakage as well as safety against flying glass if one should break.Will work on any 5/8" (15.8mm) diameter fluorescent tube. Easy to install: simply slide over lamp tube and shrink using heat gun or low flame torch.
$2.50
Product SKU:
8131
Now standard on all Votaw Tool Company fluorescent lamps is Safety Sleeve, a clear, tough, prot...
Now standard on all Votaw Tool Company fluorescent lamps is Safety Sleeve, a clear, tough, protective plastic sleeve that ispermanently fitted to the lamp providing excellent protection against breakage as well as safety against flying glass if one should break. Will work on any 5/8" (15.8mm) diameter fluorescent tube. Easy to install: simply slide over lamp tube and shrink using heat gun or low flame torch.
$2.00
Product SKU:
8130
Now standard on all Votaw Tool Company fluorescent lamps is Safety Sleeve, a clear, tough, prot...
Now standard on all Votaw Tool Company fluorescent lamps is Safety Sleeve, a clear, tough, protective plastic sleeve that ispermanently fitted to the lamp providing excellent protection against breakage as well as safety against flying glass if one should break. Will work on any 5/8" (15.8mm) diameter fluorescent tube. Easy to install: simply slide over lamp tube and shrink using heat gun or low flame torch.
$3.45
Product SKU:
8132