Over $10

REPLACEMENT ELECTRODES (PAIR)

Replacement electrodes for our #2350 Pad Cup Heater.

Replacement electrodes for our #2350 Pad Cup Heater.

REPLACEMENT OUTER SHEATH - NEOPRENE

Outer neoprene rubber replacementsheath for: #6519 or #6519A Flexible Shaft Power Tool #6520 or #...

Outer neoprene rubber replacementsheath for: #6519 or #6519A Flexible Shaft Power Tool #6520 or #6520A Flexible Shaft Power Tool Any Foredom Series S, CC, R, SR, or L motors Caution: the neoprene sheath is moreflexible than the standard, and there is more risk of breaking the inner shaft from too tight a bend.

REPLACEMENT OUTER SHEATH - STANDARD

Standard outer rubber replacementsheathing for: #6519 or #6519A Flexible Shaft Power Tool #6520 o...

Standard outer rubber replacementsheathing for: #6519 or #6519A Flexible Shaft Power Tool #6520 or #6520A Flexible Shaft Power Tool Any Foredom Series S, CC, or R motors

*DISCONTINUED*

REVERSIBLE BENCH PEG

Our newly re-designed #2401 Reversible Bench Peg works great for holding small woodwind bodies (B...

Our newly re-designed #2401 Reversible Bench Peg works great for holding small woodwind bodies (Bb clarinet, oboe, etc.) while trimming or sanding tenon corks. The peg supports the end of the instrument joint that needs the cork trimmed and the technician's body supports the opposite end.Nicely machined from non-corrosive aluminum and high density thermoplastic, the reversible design offers a tapered convex surface that fits inside the bore to safely support the instrument and a shallow conca...

RIVET GUN

Our #2112 Rivet Gun is built using heavy duty formed steel (not cast) construction and offers sli...

Our #2112 Rivet Gun is built using heavy duty formed steel (not cast) construction and offers slim design for getting into tight spaces.Complete with four interchangeable heads for rivet sizes: 3/32" (2.4mm) 1/8" (3.2mm) 5/32" (4.0mm) 3/16" (4.8mm)

ROHM KEYED CHUCK

ROHM KEYED CHUCK

ROHM KEYED CHUCK

ROLLER CONE 2" x 4" (51mm x 102mm)

Made from high density thermoplastic this cone is precision machined and polished with full radiu...

Made from high density thermoplastic this cone is precision machined and polished with full radiused end. Mounting stem is made from rust free stainless steel. Designed for bell flares on trumpet, cornet, and other small bore instruments. Diameter: 2" tapering to 0.5" (52mm - 13mm) Length (not including mounting stem): 4" (102mm) Note: this item requires #2251N Bearing Module for operation.See all Modular Roller Dent Roller System Components About our Modular Dent Roller System

ROLLER CONE 6" x 6" (152mm x 152mm)

Made from high density thermoplastic this cone is precision machined and polished with full radiu...

Made from high density thermoplastic this cone is precision machined and polished with full radiused end. Mounting stem is made from rust free stainless steel. Designed for bell flares on french horn, baritone, euphonium, tuba, sousaphone and other large bore instruments. Diameter: 6" tapering to 1.5" (152mm - 38mm) Length (not including mounting stem): 6" (152mm) Note: this item requires #2251N Bearing Module for operation.See all Modular Roller Dent Roller System Components About our Modul...

ROLLER CONE CONCAVE 6" x 6" (152mm x 152mm)

Made from high density thermoplastic this cone is precision machined and polished with full radiu...

Made from high density thermoplastic this cone is precision machined and polished with full radiused end. Mounting stem is made from rust free stainless steel. Designed for bell flares on french horn, baritone, euphonium, tuba, sousaphone and other large bore instruments. Concave profile works well for burnishing. Diameter: 6" tapering to 1.5" (152mm - 38mm) Length (not including mounting stem): 6" (152mm) Note: this item requires #2251N Bearing Module for operation.See all Modular Roller De...

ROTOR #1, #2, #3

French horn rotor #1, #2, or #3. Rotor comes without stamped number.Fits models: Holton H602 Coll...

French horn rotor #1, #2, or #3. Rotor comes without stamped number.Fits models: Holton H602 Collegiate Holton H650 Collegiate

Trombone rotor cap

ROTOR CAP

Trombone rotor cap. Nickel plate.Fits models: Jupiter 536L - after serial number 80000 Jupiter 63...

Trombone rotor cap. Nickel plate.Fits models: Jupiter 536L - after serial number 80000 Jupiter 636L - after serial number 80000 Jupiter 636RL - after serial number 80000

Holton TR181 ... F valve

ROTOR SWIVEL ARM

Trombone rotor swivel arm. IMPORTANT NOTE: In 2009 Holton made a design change in the rotor assem...

Trombone rotor swivel arm. IMPORTANT NOTE: In 2009 Holton made a design change in the rotor assembly and the direction of the slot in the swivel arm that fits over the rotor stem was reversed. Older model instruments may have the slot going in the opposite direction and will not work with this swivel arm. See picture (click to enlarge) to determine if this arm will work for your model. Note that the older design swivel arms are no longer available.Fits model: Holton TR181 / TR281 ... F valve ...

RUBBER STOPPER ASSORTMENT WITH CASE

Includes all four sets ofrubber stoppers with storage case and labels for easy identification and...

Includes all four sets ofrubber stoppers with storage case and labels for easy identification andorganization. Case is made of tough, clear, abrasion resistant K-resin highstrength copolymer. Sturdy design with hinged top.Stopper assortment includes total of28 stoppers (14 sizes with hole and 14 sizes solid).Case Dimensions: length: 11" (27.9cm) width: 6.75" (17.1cm) height: 1.75" (4.4cm)