It appears that your cart is currently empty
TROMBONE HANDSLIDE MANDREL 0.524" (13.31mm) CUS...
TROMBONE HANDSLIDE MANDREL 0.524" (13.31mm) CUSTOM
TROMBONE HANDSLIDE MANDREL 0.524" (13.31mm) CUSTOM
$99.65
TROMBONE HANDSLIDE MANDREL 0.5313" (13.49mm) ST...
TROMBONE HANDSLIDE MANDREL 0.5313" (13.49mm) STANDARD #8
TROMBONE HANDSLIDE MANDREL 0.5313" (13.49mm) STANDARD #8
$99.65
TROMBONE HANDSLIDE MANDREL 0.539" (13.69mm) CUS...
TROMBONE HANDSLIDE MANDREL 0.539" (13.69mm) CUSTOM
TROMBONE HANDSLIDE MANDREL 0.539" (13.69mm) CUSTOM
$99.65
TROMBONE HANDSLIDE MANDREL 0.5469" (13.89mm) ST...
TROMBONE HANDSLIDE MANDREL 0.5469" (13.89mm) STANDARD #9
TROMBONE HANDSLIDE MANDREL 0.5469" (13.89mm) STANDARD #9
$99.65
TROMBONE HANDSLIDE MANDREL 0.5625" (14.29mm) ST...
TROMBONE HANDSLIDE MANDREL 0.5625" (14.29mm) STANDARD #10
TROMBONE HANDSLIDE MANDREL 0.5625" (14.29mm) STANDARD #10
$99.65
TROMBONE HANDSLIDE MANDREL 0.5781" (14.68mm) ST...
TROMBONE HANDSLIDE MANDREL 0.5781" (14.68mm) STANDARD #11
TROMBONE HANDSLIDE MANDREL 0.5781" (14.68mm) STANDARD #11
$99.65
TROMBONE HANDSLIDE MANDREL 0.585" (14.86mm) CUS...
TROMBONE HANDSLIDE MANDREL 0.585" (14.86mm) CUSTOM
TROMBONE HANDSLIDE MANDREL 0.585" (14.86mm) CUSTOM
$99.65
TROMBONE HANDSLIDE MANDREL 0.5938" (15.08mm) ST...
TROMBONE HANDSLIDE MANDREL 0.5938" (15.08mm) STANDARD #12
TROMBONE HANDSLIDE MANDREL 0.5938" (15.08mm) STANDARD #12
$99.65
TROMBONE HANDSLIDE MANDREL COMPLETE SET OF 15 S...
TROMBONE HANDSLIDE MANDREL COMPLETE SET OF 15
TROMBONE HANDSLIDE MANDREL COMPLETE SET OF 15
$1,300.28
TROMBONE HANDSLIDE MANDREL RACK
Keep handslide mandrels protected and in neat order with this sturdy wood rack. Constructed from ...
Keep handslide mandrels protected and in neat order with this sturdy wood rack. Constructed from solid oak, our nicely finished rack can be mounted either vertically against a wall, or positioned horizontally above or below a workbench. Holds 16 mandrels.DIMENSIONS: length: 24" (61cm) width: 6" (15.2cm) depth: 6" (15.2cm)
$52.50
TROMBONE HANDSLIDE MANDREL SET OF 12 STANDARD S...
Made from precision ground drill rod, eachfinely polished mandrel holds a diameter and roundness ...
Made from precision ground drill rod, eachfinely polished mandrel holds a diameter and roundness tolerance of±.0005" - qualities that far surpass rods made from ordinary carbonsteel.The mandrel has a full radius machined and polishedinto one end to prevent snagging while inserting into badly dented slide pipesand to prevent putting ridges in the crook area. The mandrel's other end is number indexed for easyidentification.Overall mandrel length is 36" (91cm).Storage rack sold separately
$1,031.22
Made from precision ground drill rod, each finely polished mandrel holds a diameter and roundness...
Made from precision ground drill rod, each finely polished mandrel holds a diameter and roundness tolerance of +/- 0.0005" (0.0127mm), qualities that far surpass other mandrels on the market.All mandrels have a full radius machined and polished on one end to prevent snagging while inserting into badly dented slide pipes and to prevent putting ridges in the crook area. The mandrel's other end is number indexed for easy identification. Overall mandrel length is approximately 36" (91cm).WHICH SI...
$1,031.22
Designed for aligning both inner and outer slidepipes, our #2076 Leveling Block is constructed us...
Designed for aligning both inner and outer slidepipes, our #2076 Leveling Block is constructed using heavy plate glass enclosedin a wood case. Two steel riser blocks machined perfectly flat set on either endof the glass. Slide pipes are set on the riser blocks to determine skew ortwist. Works great for soldering and reassemby work. Whensoldering, simply position the area receiving the heat off of either end of theblock. To help hold pipes in place when soldering order our #2078 TROMBONE SLID...
$196.50
Our thanks to repair technician Ted McDowell for coming up with this clever idea for an easy to u...
Our thanks to repair technician Ted McDowell for coming up with this clever idea for an easy to use jig for holding trumpet, cornet, and other small bore brass instruments. Each side of block slides along the dovetail joint to easily adjust spacing between pegs to accomodate valve casing.Great for slide work, soldering, assembly, etc.Made from solid oak hardwood. Mounts in standard vise.Diameter of pegs: 5/8" (16mm).
$26.50
One piece Bb trumpet bell. Bore: 0.460" (11.68mm). Bell rim diameter: 4.75" (120mm). Overall l...
One piece Bb trumpet bell. Bore: 0.460" (11.68mm). Bell rim diameter: 4.75" (120mm). Overall length (bell rim to bow): 18.875" (479mm) Unfinished brass with no engraving. May have some small dents.
$231.00
TUNGSTEN CARBIDE BUR - SET OF 5
Unique structurally aligned tungsten carbide pointsleave a smootherfinish than our standard carbi...
Unique structurally aligned tungsten carbide pointsleave a smootherfinish than our standard carbide burs. Work great for removing solder andcorrosion from brass pipes and other fine cutting applications.Standard 1/8" (3.175 mm) diameter shaft will work in all of our ForedomHandheld Power Tools or any high speed hand tool. Maximum speed rating 35,000rpm.Set of 5 includes 1 each of the following: click on picture for individual specifications Ball Nose Cylinder Sphere Taper ...
$80.00
TUNGSTEN CARBIDE BUR - BALL NOSE
Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carb...
Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carbide burs. Work great for removing solder and corrosionfrom brass pipes and other fine cutting applications.Standard 1/8" (3.175 mm) diameter shaft will work in all of our ForedomHandheld Power Tools or any high speed hand tool. Maximum speed rating 35,000rpm.Cutter Dimensions: Head Length: 0.5" (12.7 mm) Head Width: 0.25" (6.35 mm) Shaft Length: 1" (25.4 mm) Shaft Diameter: 0.125" (3.175 mm) ...
$26.23
TUNGSTEN CARBIDE BUR - CYLINDER
Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carb...
Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carbide burs. Work great for removing solder and corrosionfrom brass pipes and other fine cutting applications.Standard 1/8" (3.175 mm) diameter shaft will work in all of our ForedomHandheld Power Tools or any high speed hand tool. Maximum speed rating 35,000rpm.Cutter Dimensions: Head Length: 0.5" (12.7 mm) Head Width: 0.25" (6.35 mm) Shaft Length: 1" (25.4 mm) Shaft Diameter: 0.125" (3.175 mm) ...
$26.23
TUNGSTEN CARBIDE BUR - ROTOR SAW
Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carb...
Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carbide burs. Work great for removing solder and corrosionfrom brass pipes and other fine cutting applications.Standard 1/8" (3.175 mm) diameter shaft will work in all of our ForedomHandheld Power Tools or any high speed hand tool. Maximum speed rating 35,000rpm.Cutter Dimensions: Head Length: 0.187" (4.76 mm) Head Width: 0.687" (17.46 mm) Shaft Length: 1" (25.4 mm) Shaft Diameter: 0.125" (3.175 mm) ...
$26.23
Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carb...
Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carbide burs. Work great for removing solder and corrosionfrom brass pipes and other fine cutting applications.Standard 1/8" (3.175 mm) diameter shaft will work in all of our ForedomHandheld Power Tools or any high speed hand tool. Maximum speed rating 35,000rpm.Cutter Dimensions: Head Length: 0.437" (11.11 mm) Head Width: 0.437" (11.11 mm) Shaft Length: 1" (25.4 mm) Shaft Diameter: 0.125" (3.175 mm) ...
$26.23