PADDING AND KEY LEVELING

PAD CUP HEATER

Our Pad Cup Heater is one of the most practical and time saving tools to come into the industry i...

Our Pad Cup Heater is one of the most practical and time saving tools to come into the industry in a very long time. Used worldwide by repair technicians and manufacturers, this versatile, easy to use tool is guaranteed to significantly speed up pad work, as well as prove useful in various other types of woodwind repair. INSTANT HEATING: Hold the graphite electrodes up to the key cup and squeeze the palm trigger. A 9-10mm key cup (clarinet upper joint keys for example) will heat up to melting...

PIN VISE

Nicely balanced, fluted aluminum handle with precision steel chuck.Capacity: 0 to .059" (0 to 1.5...

Nicely balanced, fluted aluminum handle with precision steel chuck.Capacity: 0 to .059" (0 to 1.5mm).Overall Length: 4-1/2" (114mm).

FLUTE PAD ADJUSTING TOOL

Made from highly polished tool steel, our flute pad adjusting tool works great for pad leveling a...

Made from highly polished tool steel, our flute pad adjusting tool works great for pad leveling and adjustment on both open and closed hole flute pads.Thickness: 0.024" (0.60mm)Overall Length: 3.3" (84mm)

VALENTINO FLUTE / CLARINET KEY CLAMP

Key clamps for flute and clarinet. Made from s...

Key clamps for flute and clarinet. Made from spring steel and vinyl coated to protect instrument finish. Light clamping action.

*DISCONTINUED*

PADDING NEEDLE

Our padding needles have an extreme taper to provide a sharp non-damaging point while maintaining...

Our padding needles have an extreme taper to provide a sharp non-damaging point while maintaining good strength. Use with our #6758 Pin Vise for an excellent tool for pad installation, removal, leveling, etc.Length: 1-1/8" (29mm)Diameter: 0.035" (0.9mm) tapering to point

AUTOMATIC KEY HAMMER

Straightening keys and key cups that have gotten bent can be a challenge. Our#2370 Automatic Key ...

Straightening keys and key cups that have gotten bent can be a challenge. Our#2370 Automatic Key Hammer offers a very precise and controlled means ofapplying a good sharp rap to the area of the key or cup that needsstraightening, and does so without any risk of scratching or marring the key orits finish. Suppose a flute key cup is sitting too high at its back side.Insert a pad spatula between the pad and the tone hole, center the spatula overthe tone hole and press down on the key until the ...

RING KEY BENDER

Designed to safely bend and center the ring key over the tone hole. Precision machined from non-c...

Designed to safely bend and center the ring key over the tone hole. Precision machined from non-corrosive aluminum and stainless steel, this tool will work on all Bb soprano clarinets. Will not mar key finish or chip tone hole chimney.