It appears that your cart is currently empty
SMALL CROOK DENT ROD - STRAIGHT
Great for small and medium bore brass instrument slide crooks.Precision built from non-corrosive ...
Great for small and medium bore brass instrument slide crooks.Precision built from non-corrosive stainless steel.Thread size: 1/4-20.Approximate overall length: 9-1/2" (24cm).Shaft diameter: 3/8" (9.5mm) tapering down to 1/4" (6.4mm).See our #2759 DENT ROD CLAMP or #2292 UNIVERSAL VISE JAWS for easy, secure mounting in a vise.Works well with our #2475 FLAT SIDE DENT BALL SET OF 30 or any dent ball with 1/4-20 thread size.
$25.00
LARGE CROOK & NECK DENT ROD - STRAIGHT
Works great for saxophone or alto/bass clarinet necks and large bore brass instrument slide crook...
Works great for saxophone or alto/bass clarinet necks and large bore brass instrument slide crooks.Precision built from non-corrosive stainless steel.Thread size: 3/8-16.Approximate overall length: 9-1/2" (24cm).Shaft diameter: 1/2" (12.7mm) tapering down to 1/4" (6.4mm).See our #2760 DENT ROD CLAMP or #2292 UNIVERSAL VISE JAWS for easy, secure mounting in a vise.Works well with the following dent balls or any dent ball with 3/8-16 thread size: #2476 FLAT SIDE DENT BALL SET OF 18 #2580 DENT B...
$30.00
Machined from rust free 303 stainless steel Works great on sax necks, crooks, etc. Overall diame...
Machined from rust free 303 stainless steel Works great on sax necks, crooks, etc. Overall diameter: 0.5" (12.7mm) both ends taper to 0.375" (9.52mm) Overall length approximately 18" (45.7cm) Both ends threaded 3/8"-16
$48.00
LARGE CROOK & NECK DENT ROD - 90°
Works great for saxophone or alto/bass clarinet necks and large bore brass instrument slide crook...
Works great for saxophone or alto/bass clarinet necks and large bore brass instrument slide crooks.Precision built from non-corrosive stainless steel.Thread size: 3/8-16.Approximate overall length: 9-1/2" (24cm).Shaft diameter: 1/2" (12.7mm) tapering down to 1/4" (6.4mm).See our #2760 DENT ROD CLAMP or #2292 UNIVERSAL VISE JAWS for easy, secure mounting in a vise.Works well with the following dent balls or any dent ball with 3/8-16 thread size: #2476 FLAT SIDE DENT BALL SET OF 18 #2580 DENT B...
$30.00
CURVED 18" DENT ROD - MEDIUM SHARP BEND
Machined from rust free 303 stainless steel Works great on sax necks, crooks, etc. Overall dia...
Machined from rust free 303 stainless steel Works great on sax necks, crooks, etc. Overall diameter: 0.5" (12.7mm) both ends taper to 0.375" (9.52mm) Overall length approximately 18" (45.7cm) Both ends threaded 3/8"-16
$48.00
Great for small and medium bore brass instrument slide crooks.Precision built from non-corrosive ...
Great for small and medium bore brass instrument slide crooks.Precision built from non-corrosive stainless steel.Thread size: 1/4-20.Approximate overall length: 7-3/4" (20cm).Shaft diameter: 3/8" (9.5mm) tapering down to 1/4" (6.4mm).See our #2759 DENT ROD CLAMP or #2292 UNIVERSAL VISE JAWS for easy, secure mounting in a vise.Works well with our #2475 FLAT SIDE DENT BALL SET OF 30 or any dent ball with 1/4-20 thread size.
$25.00
*DISCONTINUED*
Great for small and medium bore brass instrument slide crooks. Precision built from non-corrosive...
Great for small and medium bore brass instrument slide crooks. Precision built from non-corrosive stainless steel. Shaft and ball end are machined and formed from single rod.Ball diameter: 3/8" (9.5mm)Shaft diameter: 3/8" (9.5mm) tapering down to 1/4" (6.4mm).Approximate overall length: 7" (18cm).See our #2759 DENT ROD CLAMP or #2292 UNIVERSAL VISE JAWS for easy, secure mounting in a vise.
$25.00
Unlike traditional french horn dent rods that are made using a 1/2" (12.7mm) diameter rod, ours i...
Unlike traditional french horn dent rods that are made using a 1/2" (12.7mm) diameter rod, ours is made from 5/8" (15.9mm) diameter and then we taper the last 12" (30.5mm) length down to 3/8" (9.5mm).The larger 5/8" diameter provides a good deal more support to minimize flexing of the rod while raking out dents. And the smaller tapered area reduces the risk of the rod raising unwanted dents along the bell pipe.Precision machined and finished using rust free stainless steel.Thread size: 3/8-16...
$75.00
LARGE CROOK & NECK DENT ROD - 45°
Works great for saxophone or alto/bass clarinet necks and large bore brass instrument slide crook...
Works great for saxophone or alto/bass clarinet necks and large bore brass instrument slide crooks.Precision built from non-corrosive stainless steel.Thread size: 3/8-16.Approximate overall length: 9-1/2" (24cm).Shaft diameter: 1/2" (12.7mm) tapering down to 1/4" (6.4mm).See our #2760 DENT ROD CLAMP or #2292 UNIVERSAL VISE JAWS for easy, secure mounting in a vise.Works well with the following dent balls or any dent ball with 3/8-16 thread size: #2476 FLAT SIDE DENT BALL SET OF 18 #2580 DENT B...
$30.00