Under $10

INCANDESCENT LAMP - WEDGE STYLE BASE

Incandescent lamp with wedge style base for use on old style #8104 (discontinued) cord, plug, and...

Incandescent lamp with wedge style base for use on old style #8104 (discontinued) cord, plug, and jack. Rated 6.3 volt.

MICRO INCANDESCENT LAMP

Our #8151 Micro Incandescent Lamp is a excellent choice for an all purpose light source. Although...

Our #8151 Micro Incandescent Lamp is a excellent choice for an all purpose light source. Although quite small in size, this lamp is extremely bright and can be used in Bb soprano clarinets, piccolos, flutes, oboes, saxophones, etc.Also works great for inspecting the insides of mouthpipes, valve casings, arch top guitars, violins and various other string instruments.The new plug in design replaces our older style solder-on miniature lamp. For customers who have the solder-on style we sell an u...

MICRO INCANDESCENT LAMP - UPGRADE KIT

For customers who have our older #8100 solder-on style miniature lamp this upgradekit will conver...

For customers who have our older #8100 solder-on style miniature lamp this upgradekit will convert your existing cord to our new plug-inmicro lamp.Kit includes: socket, lamp, heat shrink, and instructions. Easy installation.

SAFETY SLEEVE - 6" (15cm)

Now standard on all Votaw Tool Company fluorescent lamps is Safety Sleeve, a clear, tough, prot...

Now standard on all Votaw Tool Company fluorescent lamps is Safety Sleeve, a clear, tough, protective plastic sleeve that ispermanently fitted to the lamp providing excellent protection against breakage as well as safety against flying glass if one should break. Will work on any 5/8" (15.8mm) diameter fluorescent tube. Easy to install: simply slide over lamp tube and shrink using heat gun or low flame torch.

SAFETY SLEEVE - 20" (51mm)

Now standard on all Votaw Tool Company fluorescent lamps is Safety Sleeve, a clear, tough, prot...

Now standard on all Votaw Tool Company fluorescent lamps is Safety Sleeve, a clear, tough, protective plastic sleeve that ispermanently fitted to the lamp providing excellent protection against breakage as well as safety against flying glass if one should break. Will work on any 5/8" (15.8mm) diameter fluorescent tube. Easy to install: simply slide over lamp tube and shrink using heat gun or low flame torch.

SMALL INCANDESCENT LAMP

Our #8221 Small Incandescent Lamp has a bayonet style base. Similar to the old Erick Brand 'clari...

Our #8221 Small Incandescent Lamp has a bayonet style base. Similar to the old Erick Brand 'clarinet' lamp. Requires our #8125 Cord w/ Plug & Socket.Dimensions: bulb diameter: 0.437" (11.1mm) socket diameter: 0.375" (9.5mm) Will work with our #8012 and #8091 control units, as well as the following older models: #8002 #8010 #8075A #8004 #8010A #8005 #8075 About Our Leak Lights