YANAGISAWA

Yanagisawa Tenor and Baritone Saxophone

SIDE F# KEY GUARD

Saxophone side F# key guard. Solders to body. Fits tenor sax models: Yanagisawa T880 (newer mode...

Saxophone side F# key guard. Solders to body. Fits tenor sax models: Yanagisawa T880 (newer models only - check dimension specifications to confirm fit) Yanagisawa T990 Fits bari sax models: Vito 7190BA Yanagisawa B880 Yanagisawa B901 Yanagisawa B990

Saxophone low C# flat spring ring

LOW C# FLAT SPRING RING

Saxophone low C# flat spring ringFits soprano sax models: Yanagisawa 2100SS Fits alto sax mod...

Saxophone low C# flat spring ringFits soprano sax models: Yanagisawa 2100SS Fits alto sax models: Yanagisawa A880 Yanagisawa A901 Yanagisawa A902 Yanagisawa A990 Yanagisawa A991 Fits tenor sax models: Yanagisawa T880 Yanagisawa T901 Yanagisawa T902 Yanagisawa T990 Yanagisawa T991 Yanagisawa T992 Fits bari sax models: Vito 7190BA Yanagisawa B880 Yanagisawa B901 Yanagisawa B990

BELL BRACE RING SCREW - SHORT

Yanagisawa saxophone bell / body joint ring screw. *NOTE: A design change to the joint ring was m...

Yanagisawa saxophone bell / body joint ring screw. *NOTE: A design change to the joint ring was made by manufacturer and this screw may not work for all Yanagisawa models. Dimensional specifications are provided below to help with identification.Screw dimensions: overall length: 0.31" (8mm) head diameter: 0.2" (5mm) thread diameter: 0.118" (3mm)

BELL / BODY JOINT RING SCREW - LONG

Yanagisawa saxophone bell / body joint ring screw. *NOTE: A design change to the joint ring was m...

Yanagisawa saxophone bell / body joint ring screw. *NOTE: A design change to the joint ring was made by manufacturer and this screw may not work for all Yanagisawa models. Dimensional specifications are provided below to help with identification.Screw dimensions: overall length: 0.45" (11.5mm) head diameter: 0.275" (7mm) thread diameter: 0.2" (5mm)

ADJUSTING SCREW

Adjusting screw for the F# adjusting bar, and for the low A, Bb, and B keys on newer and some old...

Adjusting screw for the F# adjusting bar, and for the low A, Bb, and B keys on newer and some older model Yanagisawa saxophones. Thread size: 5mm. Sold by each.NOTE: Will not fit older models that take a smaller 4mm thread and where the screw has a flat plate and installs into the bar from the bottom by screwing counter-clockwise.