All

Flute D# trill key - silver plated

D# TRILL KEY

Flute D# trill key - silver platedFits models: Gemeinhardt 2SP - with serial numbers beginning ...

Flute D# trill key - silver platedFits models: Gemeinhardt 2SP - with serial numbers beginning with L, I, M, N, and J Gemeinhardt 2SH - with serial numbers beginning with L, I, M, N, and J Gemeinhardt 2S - with serial numbers beginning with L, I, M, N, and J Gemeinhardt 3 - with serial numbers beginning with L, I, M, N, and J Gemeinhardt 3B - with serial numbers beginning with L, I, M, N, and J Gemeinhardt 3S - with serial numbers beginning with L, I, M, N, and J Gemeinhardt 3SB - with seri...

Flute D# trill key spatula (touchpiece) - silver plated

D# TRILL KEY SPATULA

Flute D# trill key spatula (touchpiece) - silver platedFits models: Gemeinhardt 2SP - with seri...

Flute D# trill key spatula (touchpiece) - silver platedFits models: Gemeinhardt 2SP - with serial numbers beginning with L, I, M, N, and J Gemeinhardt 2SH - with serial numbers beginning with L, I, M, N, and J Gemeinhardt 2S - with serial numbers beginning with L, I, M, N, and J Gemeinhardt 3 - with serial numbers beginning with L, I, M, N, and J Gemeinhardt 3B - with serial numbers beginning with L, I, M, N, and J Gemeinhardt 3S - with serial numbers beginning with L, I, M, N, and J Gemein...

D'S T-SLIDE KNOCKEROUTER

Local Springfield, Missouri technician, Duane Lewis,designed and manufactures these handy tools u...

Local Springfield, Missouri technician, Duane Lewis,designed and manufactures these handy tools used for removing slightly stucktuning slides. The seven different sizes are shaped and contoured to coverpractically all tuning slides from trumpet and cornet on up to sousaphone.Simple to use - place contoured end against inner surface of slide crook andlightly tap with mallet. Made from solid oak with cushioned end to protect against damage to the crook.Set contains 7 different sizes.

D'S T-SLIDE KNOCKEROUTER #00 (Special Order - E...

Replacement for smallest size of the #2440 D'S T-SLIDE KNOCKEROUTERS. THIS IS A SPECIAL ORDER. AL...

Replacement for smallest size of the #2440 D'S T-SLIDE KNOCKEROUTERS. THIS IS A SPECIAL ORDER. ALLOW 2 - 4 WEEKS.

DEBURRING TOOL

Pivot blade swivels for easy removal of bur from inside tubing edge. Extra blade storage in handl...

Pivot blade swivels for easy removal of bur from inside tubing edge. Extra blade storage in handle end.Handle length: 5" (127mm).Comes with 2 blades.

*DISCONTINUED*

DENT HAMMER - LIGHT / MEDIUM DUTY

Our #2125 hammer is an excellent choice for dent work on small and medium bore instruments: trump...

Our #2125 hammer is an excellent choice for dent work on small and medium bore instruments: trumpets, french horn, etc. Both faces of the head have a diameter of 3/4" (19mm), with a slight radius on one side and a sharp radius on the other.The hammer head is precision machined from non-corrosive, rust free, 303 stainless steel and polished to a fine finish. The hammer shaft is machined from 6066 T6 aluminum and fitted with a nicely tapered, cross patterned handle machined from Delrin®. For te...

DENT HAMMER - LIGHT / MEDIUM DUTY - NARROW

Our new #2129 model hammer works well on small and medium bore instruments: trumpets, french horn...

Our new #2129 model hammer works well on small and medium bore instruments: trumpets, french horn, etc. While both faces of the head have the same 3/4" (19mm) radius profile as the #2125 model hammer, we have 'sliced' of the sides of the faces to bring the face width down to 0.5" (13mm to allow access in tight areas..The hammer head is precision machined from non-corrosive, rust free, 303 stainless steel and polished to a fine finish. The hammer shaft is machined from 6066 T6 aluminum and fit...

DENT ROD CLAMP - 5/8" (15.9mm)

Our Dent Rod Clamps work great for holding dent rods, knuckle tools, or mandrels securely in a st...

Our Dent Rod Clamps work great for holding dent rods, knuckle tools, or mandrels securely in a standard bench vise. Locks rod in tight to prevent slippage and also protects rods from being marred by vise jaws.The two halves of the clamp are secured together to allow easy clamping and positioning in the vise. Slides on and off rod so it can be quickly interchanged with other rods. Works for all 5/8" (15.9mm) diameter rods or mandrels.

DENT ROD CLAMP - 3/8" (9.5mm)

Our Dent Rod Clamps work great for holding dent rods, knuckle tools, or mandrels securely in a st...

Our Dent Rod Clamps work great for holding dent rods, knuckle tools, or mandrels securely in a standard bench vise. Locks rod in tight to prevent slippage and also protects rods from being marred by vise jaws.The two halves of the clamp are secured together to allow easy clamping and positioning in the vise. Slides on and off rod so it can be quickly interchanged with other rods. Works for all 3/8" (9.5mm) diameter rods or mandrels. Other sizes available - see below.

DENT ROD ELBOW 1/4-28 - 65 DEGREE

Our Dent Rod Elbows are designed to work as extensions on a standard dent rod for changing the an...

Our Dent Rod Elbows are designed to work as extensions on a standard dent rod for changing the angle and position of the dent ball. Designed to screw onto dent rod with 1/4-28 thread size and use dent balls with same thread.

DENT ROD ELBOW 3/8-16 - 30 DEGREE

Our Dent Rod Elbows are designed to work as extensions on a standard dent rod for changing...

Our Dent Rod Elbows are designed to work as extensions on a standard dent rod for changing the angle and position of the dent ball. Great for sax bow work. Designed to screw onto dent rod with 3/8-16 thread size and use dent balls with same thread.

DENT ROD ELBOW 3/8-16 - 45 DEGREE

Our Dent Rod Elbows are designed to work as extensions on a standard dent rod for changing...

Our Dent Rod Elbows are designed to work as extensions on a standard dent rod for changing the angle and position of the dent ball. Great for sax bow work. Designed to screw onto dent rod with 3/8-16 thread size and use dent balls with same thread.

DENT ROD ELBOW 3/8-16 - 90 DEGREE

Our Dent Rod Elbows are designed to work as extensions on a standard dent rod for changing...

Our Dent Rod Elbows are designed to work as extensions on a standard dent rod for changing the angle and position of the dent ball. Great for sax bow work. Designed to screw onto dent rod with 3/8-16 thread size and use dent balls with same thread.