Over $10

CHUCK STYLE HANDPIECE

Handpiece constructed with pre-lubricated ball bearings that require nomaintenance. Equipped with...

Handpiece constructed with pre-lubricated ball bearings that require nomaintenance. Equipped with geared 3-jaw #0 Jacobs? chuck and quick action chuckkey. Works best for drill bits and small shaft cutters and burs.Chuck capacity: 0 -5/32" (0 - 4 mm)Handpiece overall length: 5.4" (13.7 cm)Handpiece diameter: 1.0" (25.4 mm)Handpiece weight: 5.9 oz (167 g)Easily attaches with quick disconnect to any Foredom Flexible Shaft Power Tool.

CLARINET TESTING PLUG ASSORTMENT

Complete assortment of neoprene plugs for testing Bb soprano clarinet.Total of 35 plugs with stor...

Complete assortment of neoprene plugs for testing Bb soprano clarinet.Total of 35 plugs with storage case.Includes 24" (61cm) hose and connector fitting for use with MAG Machine.

COLLET STYLE HANDPIECE

Handpiece constructed with pre-lubricated ball bearings that require no maintenance. Collet desig...

Handpiece constructed with pre-lubricated ball bearings that require no maintenance. Collet design works best for using cutting burs, wheels and buffs.Comes with wrench and 3 different size collets for holding the following shaftsizes:3/32" (2.38mm)......1/8" (3.17mm) ......1/4" (6.35mm)Handpiece overalllength: 5.6" (14.2cm)Handpiece diameter: 1.0" (25.4mm)Handpiece weight: 5.9 oz (167 g)Easily attaches with quick disconnect to any Foredom Flexible Shaft Power Tool.

CONCRETE FLOOR ANCHORS (ADJUSTABLE VISE STAND)

Set of four concrete wedge type anchors for installing our Adjustable Vise Stand into concrete fl...

Set of four concrete wedge type anchors for installing our Adjustable Vise Stand into concrete floor.INSTALLATION INSTRUCTIONS:After determining vise stand location, set vise stand in position and mark or scribe on the floor the location of the 4 mounting holes in the base plate. Set vise stand to the side and in the marked locations drill four 1/2" (12.7mm) diameter holes to a minimum depth of 2 3/4" (70mm) using masonry drill bit. We recommend first using a 1/8" (3.2mm) drill bit for a pilo...

CONTROL UNIT - FLUORESCENT & INCANDESCENT

Our #8091 Leak Light Control Unit is our most popular seller because it is designed to operate ou...

Our #8091 Leak Light Control Unit is our most popular seller because it is designed to operate our complete selection of fluorescent and incandescent lamps. Features include: sturdy aluminum chassis solid components including electronic self-start ballast illuminated ON/OFF rocker switch fuse protected both fluorescent and incandescent lamps can be operated simultaneously 6' (1.82m) heavy duty power cord with ground plug 110-120 volt power source (for 220-240 volt see our voltage convertors)...

CORK CLARINET PAD - ASSORTMENT ONLY

This cork pad assortment includes 10 each of our complete selection of cork pads. Total of 150 pa...

This cork pad assortment includes 10 each of our complete selection of cork pads. Total of 150 pads. Assortment price offers additional 10% discount.Our cork pads are the finest available to repair technicians. Unlike standard waterkey corks which are cross cut, all of our cork pads are shive cut, resulting in perfectly clear, pore free pads. Pads are cut with straight sides (no bevel).

CORK CLARINET PAD - ASSORTMENT WITH CASE & LABELS

This cork pad assortment with storage case includes 10 each of our complete selection of cork pad...

This cork pad assortment with storage case includes 10 each of our complete selection of cork pads. Total of 150 pads. Assortment price offers additional 10% discount.Our cork pads are the finest available to repair technicians. Unlike standard waterkey corks which are cross cut, all of our cork pads are shive cut, resulting in perfectly clear, pore free pads. Pads are cut with straight sides (no bevel).Storage case is made of tough, clear, abrasion resistant, K-resin high strengthcopolymer. ...

CROSS LOCK TWEEZERS - CURVED TIP

Cross lock tweezers are excellent for applying adjustment corks and felts as well as for general ...

Cross lock tweezers are excellent for applying adjustment corks and felts as well as for general shop use. Made from stainless steel with heat resistant fiber grips. Normal position is closed - squeeze to open.Approximate Length: 6-1/4" (16.5 cm)Tip Style: curved

CURVED 18" DENT ROD - MEDIUM BEND

Machined from rust free 303 stainless steel Works great on sax necks, crooks, etc. Overall dia...

Machined from rust free 303 stainless steel Works great on sax necks, crooks, etc. Overall diameter: 0.5" (12.7mm) both ends taper to 0.375" (9.52mm) Overall length approximately 18" (45.7cm) Both ends threaded 3/8"-16

CURVED 18" DENT RODS - SET OF 4

Set of four includes 1 each of our 18" curved dent rods. Precision machined from non-corrosive...

Set of four includes 1 each of our 18" curved dent rods. Precision machined from non-corrosive stainless steel. Tapered ends with 3/8-16 thread size. #2304 SLIGHT BEND #2305 MEDIUM BEND #2308 MEDIUM SHARP BEND #2306 SHARP BEND Rods also sold separately, click above for more information.

CUSTOM DIE HANDLE

Our CUSTOM DIE HANDLE is specially designed for the musical instrument repair shop. The short 3" ...

Our CUSTOM DIE HANDLE is specially designed for the musical instrument repair shop. The short 3" (76mm) length allows easy, steady control, especially when starting the cut on even the smallest of thread sizes.Non-corrosive aluminum construction. Designed to hold all 13/16" (20.6mm) thread cutting dies.

CUT-OUT CASE LATCH

Cut-out case latch, includes key. Lock section requires 1" (25mm) x 1.8 (46mm)" x 0.24 (6mm)" dee...

Cut-out case latch, includes key. Lock section requires 1" (25mm) x 1.8 (46mm)" x 0.24 (6mm)" deep cutout. Hasp (upper section) is flush mount.Finish: nickelHole Diameter: 0.130" (3.3mm)Dimensions: hasp: width: 1.6" (41mm) height: 1.93" (49mm) lock section: width: 2.26" (57.4mm) height: 1.32" (33.5mm)

Flute D key - silver plated

D KEY

Flute D key - silver platedFits models: Gemeinhardt 2SP - with serial numbers beginning with L,...

Flute D key - silver platedFits models: Gemeinhardt 2SP - with serial numbers beginning with L, I, M, N, and J Gemeinhardt 2SH - with serial numbers beginning with L, I, M, N, and J Gemeinhardt 2S - with serial numbers beginning with L, I, M, N, and J Gemeinhardt 3 - with serial numbers beginning with L, I, M, N, and J Gemeinhardt 3B - with serial numbers beginning with L, I, M, N, and J Gemeinhardt 3S - with serial numbers beginning with L, I, M, N, and J Gemeinhardt 3SB - with serial numb...