STUCK SLIDE REMOVAL

5 items

D'S T-SLIDE KNOCKEROUTER

Local Springfield, Missouri technician, Duane Lewis,designed and manufactures these handy tools u...

Local Springfield, Missouri technician, Duane Lewis,designed and manufactures these handy tools used for removing slightly stucktuning slides. The seven different sizes are shaped and contoured to coverpractically all tuning slides from trumpet and cornet on up to sousaphone.Simple to use - place contoured end against inner surface of slide crook andlightly tap with mallet. Made from solid oak with cushioned end to protect against damage to the crook.Set contains 7 different sizes.

$48.00

Product SKU: 2440

SLIDE KNOCKER

This handy slide removing tool works great for tapping out slightly stuck tuning slides - ...

This handy slide removing tool works great for tapping out slightly stuck tuning slides - especially ones that have a crook with a tight radius. Designed to work like a slide hammer, either side of the 'T' end of the tool is set against the inner side of the crook and the 'slider' is run up against the stop to knock the slide loose.New design features all steel construction and longer length for greater impact. Overall length is 14" (36cm).Profiled ends provide access to ...

$76.00

Product SKU: 2446

SNAPPER SLIDE PULLER

Designed for large bore brass instruments such astubas, sousaphones, baritones, and euphoniums, o...

Designed for large bore brass instruments such astubas, sousaphones, baritones, and euphoniums, our Snapper Slide Puller is hasproven to be a well used item in anyrepair shop. Simple to use, it can quickly break loose many stuck tuning slides without damaging or marring the instrument.Simply run the loop end around theslide crook and bring thehandle through the loop. While holding the instrumentstationary, grasp the handle and apply a sharp rap.The steel handle weighs a hefty 1 lb. (0.45 kg) ...

$18.00

Product SKU: 2445

SOLDER-IN SLIDE PLUGS-SET OF 5

Set contains 1 each of: #2430SOLDER-IN SLIDE PLUG 0.500" x 2"#2431SOLDER-IN SLIDE PLUG 0.500" x ...

Set contains 1 each of: #2430SOLDER-IN SLIDE PLUG 0.500" x 2"#2431SOLDER-IN SLIDE PLUG 0.500" x 4" #2432SOLDER-IN SLIDE PLUG 0.625" x 4" #2433SOLDER-IN SLIDE PLUG 0.750" x 4" #2434SOLDER-IN SLIDE PLUG 1.0" x 4"

$68.00

Product SKU: 2429

*DISCONTINUED*

SOLDER-ON DENT KNOCKER KIT

Our Solder-On Dent Knocker Kit is designed to pull up dents that are either impractical or not po...

Our Solder-On Dent Knocker Kit is designed to pull up dents that are either impractical or not possible to get to with a dent ball. For example, when a trumpet bell crook is crushed so badly that even the smallest dent ball won't work, this tool will raise the dent far enough to begin using a dent ball and driver.Or when the job requires disassembly of the instrument to get to the dent, such as on a baritone saxophone neck, the Solder-On Dent Knocker can be used to raise the dent to restore t...

$63.25

Product SKU: 2390
×
Welcome Newcomer