It appears that your cart is currently empty
DENT HAMMER - LIGHT / MEDIUM DUTY - NARROW
Our new #2129 model hammer works well on small and medium bore instruments: trumpets, french horn...
Our new #2129 model hammer works well on small and medium bore instruments: trumpets, french horn, etc. While both faces of the head have the same 3/4" (19mm) radius profile as the #2125 model hammer, we have 'sliced' of the sides of the faces to bring the face width down to 0.5" (13mm to allow access in tight areas..The hammer head is precision machined from non-corrosive, rust free, 303 stainless steel and polished to a fine finish. The hammer shaft is machined from 6066 T6 aluminum and fit...
$54.00
Use for holding drill bits and small thread cutting taps for working in tight places. Works great...
Use for holding drill bits and small thread cutting taps for working in tight places. Works great for drilling out or rethreading body posts where clearance from body makes access difficult.Comes with two double-ended collets to provide 0 to .125" (0 to 3.2 mm) capacity. Collet not in use stores in handle end.Overall length 3 1/2" (89 mm).
$6.00
WIHA SLOTTED SCREWDRIVER - SMALL - 2.0mm x 100mm
SPECIFICATIONS: tip width: small / 0.079" (2.0mm) blade length: 4" (100mm) overall length: ...
SPECIFICATIONS: tip width: small / 0.079" (2.0mm) blade length: 4" (100mm) overall length: 7.1" (180mm) RECOMMENDED USE: screw type: pivot and long (hinge) screws instrument: Flute, Clarinet, Oboe, Piccolo Votaw Tool Company is pleased to offer the Wiha? line of screw drivers. Blades are made of high alloy vanadium-molybdenum steel specially developed for Wiha? and are salt-bath hardened and tempered to provide optimum hardness, maximum torque transfer and exceptional d...
$6.38
Works great for removing excess solder. Heat solder and wicking will absorb excess. Sold in 5' (1...
Works great for removing excess solder. Heat solder and wicking will absorb excess. Sold in 5' (15.2cm) spool. QUANTITY DISCOUNT: Order 3 and save 25%!
$3.60
Our PRO LEAK LIGHT SYSTEM includes all of our available lamps, providing features needed for the ...
Our PRO LEAK LIGHT SYSTEM includes all of our available lamps, providing features needed for the complete repair shop. Designed to work on 110-120 volt power source. For 220-240 volt power source order our voltage converter. Includes one each of the following: #8091 Control Unit #8120 Fluorescent 20" Lamp with Cord & Plug #8112 Fluorescent 12" Lamp with Cord & Plug #8106 Fluorescent 6" Lamp with Cord & Plug #8107 Double Fluorescent 6" Lamp with Cord & Plug #8222 L...
$479.62
Pivot blade swivels for easy removal of bur from inside tubing edge. Extra blade storage in handl...
Pivot blade swivels for easy removal of bur from inside tubing edge. Extra blade storage in handle end.Handle length: 5" (127mm).Comes with 2 blades.
$9.52
SILVER SOLDER - FOR LACQUERED BRASS
This silver solder provides best color match for brass keys and instruments. Excellent flow and s...
This silver solder provides best color match for brass keys and instruments. Excellent flow and strength properties. Note that for best results this solder requires a longer heating time than our #3241 solder to achieve good flow. Solder that just balls up may be a result of applying the solder to soon (note the difference between melt temperature and flow temperature shown below). Melts at 1250° F (677° C) / Flows at 1410° F (766° C). Diameter: 1/32" (0.79mm). Sold in 4' (1.22m) length. Also...
$6.12
SAXOPHONE KEY CUP ALIGNMENT TOOL
This tool is designed for centering asaxophone key cup over the tone hole. The slot in the tool i...
This tool is designed for centering asaxophone key cup over the tone hole. The slot in the tool is positioned overthe key arm and sideward pressure is applied to move the key to left or right.Provides easy, accurate positioning of key cup without marring the key. Designed with a different width slot in each end of the tool to accomodate wide variety of key sizes.Precision machined from aircraft quality T6 aluminum.
$45.00
This wood parts caddy keeps trumpet, cornet and french horn slides, pistons, caps, springs etc. o...
This wood parts caddy keeps trumpet, cornet and french horn slides, pistons, caps, springs etc. organized and safe. Sturdy, solid construction made from solid oak. Handy for make plays and cleaning jobs; works great for holding parts during lacquering process. Safe to put in the oven for baked on finishes.
$36.25
Premium Grade Tool Steel Highly Polished Width: 1" (25.4mm) Standard 2" Length Tang
Premium Grade Tool Steel Highly Polished Width: 1" (25.4mm) Standard 2" Length Tang
$59.20
ECONOMY INCANDESCENT LEAK LIGHT SYSTEM
Similar to the old Erick Brand leak lights, the #8410 Economy Leak Light System includes one each...
Similar to the old Erick Brand leak lights, the #8410 Economy Leak Light System includes one each of the items listed below. Designed to work on 110-120 volt power source. For 220-240 volt power source order our voltage converter. Includes one each of the following: #8012 Incandescent Control Unit #8222 Large Incandescent Lamp #8126 Large Incandescent Cord Plug #8221 Small Incandescent Lamp #8125 Small Incandescent Cord Plug
$134.60
Our CUSTOM DIE HANDLE is specially designed for the musical instrument repair shop. The short 3" ...
Our CUSTOM DIE HANDLE is specially designed for the musical instrument repair shop. The short 3" (76mm) length allows easy, steady control, especially when starting the cut on even the smallest of thread sizes.Non-corrosive aluminum construction. Designed to hold all 13/16" (20.6mm) thread cutting dies.
$18.00
This shrink tube is used to cover the pins and wire connections of the two ends of fluorescent tu...
This shrink tube is used to cover the pins and wire connections of the two ends of fluorescent tubes. Sold in pair.
$2.50
The Blazer® Micro Torch Pro is the finest self-contained butane torch available featuring precise...
The Blazer® Micro Torch Pro is the finest self-contained butane torch available featuring precise flame control, easy one hand operation, and rugged design and construction. Press and hold thumb trigger for quick 'Piezo' self ignite and operation. Release thumb trigger to turn off, or engage trigger lock to maintain flame.The adjustable flame length and flame intensity make this an excellent tool for all types of repairs including soft soldering, silver soldering / brazing, and pad work. Also...
$75.65
Our flute body mandrel is designed for working on flute main body and foot sections. Made from hi...
Our flute body mandrel is designed for working on flute main body and foot sections. Made from high quality drill rod that is ground and polished to a roundness tolerance of ±.0005" and finished with a smooth, full radius at one end.Excellent for burnishing, hammering or rolling out dents, straightening bentbodies, rounding out tenon joints, or performing tone hole work.Diameter: 0.734" (18.64mm). Overall Length: 18" (45.7cm).
$52.00
The Bobcat Mouthpiece Puller has become the standard in the industry, used worldwide by repair te...
The Bobcat Mouthpiece Puller has become the standard in the industry, used worldwide by repair technicians, professional musicians, and educators. Works on all brass instruments. Easy, safe to use design takes just seconds to remove even severely stuck mouthpieces.Sturdy construction, compact design, and no loose parts or attachments to keep track of.
$53.50
Set contains four tapered rubber stoppers for checking for leaks in Bb soprano clarinet upper and...
Set contains four tapered rubber stoppers for checking for leaks in Bb soprano clarinet upper and lower joints.Two stoppers are solid and two have hole in center. Put solid stopper in one end of joint and stopper with hole in opposite end. Check for leaks by closing keys and blowing in stopper with hole.
$3.50
These duckbill pliers offer broad 5/8" (16mm) wide curved jaws to provide good support and contro...
These duckbill pliers offer broad 5/8" (16mm) wide curved jaws to provide good support and control for key straightening and adjustments. Contoured handle with cushioned grips.Dimensions: Jaw width: 0.625" (16mm) Jaw depth: 1.5" (38mm) Overall length: 6.5" (168mm)
$26.85
Handy punch pliers features rotating head and 6 different hole punch sizes. Punches are made from...
Handy punch pliers features rotating head and 6 different hole punch sizes. Punches are made from hardened steel and are tapered and hollow for non-clogging operation.Plated chassis with self opening spring.Overall length: 8 1/2" (216mm). Punch sizes: 5/64" (2.0mm) 3/32" (2.5mm) 7/64" (3.0mm) 1/8" (3.5mm) 5/32" (4.0mm) 3/16" (4.5mm)
$13.98
This simple tool can be very helpful in locating leaks from gaps between tone holes and pads, as ...
This simple tool can be very helpful in locating leaks from gaps between tone holes and pads, as well as key to key adjustments. In addition, this tool will assist in finding broken and porous skins, small holes in pad skins, leaks around pad screws and washers, and to check the integrity of joint sockets and receivers.The Flute Leak Isolator can be used by itself or with the Mag Machine (note that Mag Machine is sold separately).Easy to use, just insert the isolator into the flute body tube ...
$132.47