Under $10

Flute low B key roller - silver plated

ROLLER - LOW B KEY - SILVER - .545" (14mm)

Flute low B key roller - silver plated. Use with G811043 roller screw.Overall length of 0.545" ...

Flute low B key roller - silver plated. Use with G811043 roller screw.Overall length of 0.545" (14mm).B Foot Joint only.Fits models: Gemeinhardt 3B - with serial numbers beginning with L, I, M, N, and J Gemeinhardt 3SB - with serial numbers beginning with L, I, M, N, and J Gemeinhardt 3SHB - with serial numbers beginning with L, I, M, N, and J

Flute low C key roller - nickel plated

ROLLER - LOW C KEY - NICKEL - .672" (17mm)

Flute low C key roller - nickel plated. Use with G811029 roller screw.Fits models: Gemeinhardt...

Flute low C key roller - nickel plated. Use with G811029 roller screw.Fits models: Gemeinhardt 2NP - with serial numbers beginning with L, I, M, N, and J

Flute low C key roller - silver plated

ROLLER - LOW C KEY - SILVER - .512" (13mm)

Flute low C key roller - silver plated. Use with G811030 roller screw.Roller has an overall len...

Flute low C key roller - silver plated. Use with G811030 roller screw.Roller has an overall length of 0.512" (13mm).Fits models: Gemeinhardt 2SP - with serial numbers beginning with K and P Gemeinhardt 2SH - with serial numbers beginning with K and P Gemeinhardt 2S - with serial numbers beginning with K and P Gemeinhardt 3 - with serial numbers beginning with K and P Gemeinhardt 3B - with serial numbers beginning with K and P Gemeinhardt 3S - with serial numbers beginning with K and P Geme...

Flute low C key roller - silver plated

ROLLER - LOW C KEY - SILVER - .672" (17mm)

Flute low C key roller - silver plated. Use with G811029 roller screw.Roller has profiled end w...

Flute low C key roller - silver plated. Use with G811029 roller screw.Roller has profiled end with an overall length of 0.672" (17mm).Fits models: Gemeinhardt 2SP - with serial numbers beginning with L, I, M, N, and J Gemeinhardt 2SH - with serial numbers beginning with L, I, M, N, and J Gemeinhardt 2S - with serial numbers beginning with L, I, M, N, and J Gemeinhardt 3 - with serial numbers beginning with L, I, M, N, and J Gemeinhardt 3B - with serial numbers beginning with L, I, M, N, an...

ROTARY VALVE RUBBER STOP CORD 1/4" X 6" (6.35mm...

Most suppliers offer an 'off the shelf' rubber cord that is either too soft and spongy or too har...

Most suppliers offer an 'off the shelf' rubber cord that is either too soft and spongy or too hard. Our cord has been specially designed and fabricated with an exact durometer (hardness) for rotary valve instruments offering the proper amount of resistance to the rotor stop.Extruded from a very high grade of rubber, it greatly resists drying out and turning hard over time. Far superior and longer lasting than cork and most often preferred by professionals and teachers.Sold in 6" (15.3cm) leng...

RUBBER BUMPER END GUARD

Rubber bumper for handslide crook guard. Sold by each. Fits Holton and many others. Overall lengt...

Rubber bumper for handslide crook guard. Sold by each. Fits Holton and many others. Overall length: 0.5" (12.7mm).Hole diameter: 0.2" (5mm). Note: same as H218651.

Trumpet rubber slide bumper (o-ring)

RUBBER SLIDE BUMPER

Trumpet rubber slide bumper (o-ring)Same as universal part #9702Fits models: Jupiter 600ML Jupi...

Trumpet rubber slide bumper (o-ring)Same as universal part #9702Fits models: Jupiter 600ML Jupiter 600MS Jupiter 600NL Jupiter 600NS Jupiter 606MRL Jupiter 1000S Jupiter 1002S Jupiter 1010S Jupiter 1200S

RUBBER SLIDE BUMPER

RUBBER SLIDE BUMPER

RUBBER SLIDE BUMPER

RUBBER STOPPER SET - LARGE - SOLID

Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pu...

Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pure rubber, the stoppers areavailable either solid or with a hole in the center. Stoppers with a hole areused to plug up the end of the instrument that the technician would put theirmouth to.Large Set Diameter Range: 7/8" (22.2 mm) to 1 5/8" (41.3 mm)Length: 1" (25.4 mm)

RUBBER STOPPER SET - SMALL - HOLE

Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pu...

Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pure rubber, the stoppers areavailable either solid or with a hole in the center. Stoppers with a hole areused to plug up the end of the instrument that the technician would put theirmouth to.Small Set Diameter Range: 3/8" (9.5 mm) to 1" (25.4 mm)Length: 0.75" (19mm) and 1" (25.4 mm)

RUBBER STOPPER SET - SMALL - SOLID

Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pu...

Our rubber stoppers work great for testing for airleaks in both woodwinds and brass. Made from pure rubber, the stoppers areavailable either solid or with a hole in the center. Stoppers with a hole areused to plug up the end of the instrument that the technician would put theirmouth to.Small Set Diameter Range: 3/8" (9.5 mm) to 1" (25.4 mm)Length: 0.75" (19mm) and 1" (25.4 mm)

SAFETY SLEEVE - 6" (15cm)

Now standard on all Votaw Tool Company fluorescent lamps is Safety Sleeve, a clear, tough, prot...

Now standard on all Votaw Tool Company fluorescent lamps is Safety Sleeve, a clear, tough, protective plastic sleeve that ispermanently fitted to the lamp providing excellent protection against breakage as well as safety against flying glass if one should break. Will work on any 5/8" (15.8mm) diameter fluorescent tube. Easy to install: simply slide over lamp tube and shrink using heat gun or low flame torch.

SAFETY SLEEVE - 20" (51mm)

Now standard on all Votaw Tool Company fluorescent lamps is Safety Sleeve, a clear, tough, prot...

Now standard on all Votaw Tool Company fluorescent lamps is Safety Sleeve, a clear, tough, protective plastic sleeve that ispermanently fitted to the lamp providing excellent protection against breakage as well as safety against flying glass if one should break. Will work on any 5/8" (15.8mm) diameter fluorescent tube. Easy to install: simply slide over lamp tube and shrink using heat gun or low flame torch.