It appears that your cart is currently empty
Order online or call us 888-922-6030
Over $100
*DISCONTINUED*
PROFESSIONAL SOLDERING FIXTURE
Our Professional Soldering Fixture is the finest available. Constructed from a combination of sta...
Our Professional Soldering Fixture is the finest available. Constructed from a combination of stainless steel and quality 6061 T6 aluminum, our fixture is precision designed and machined, surpassing any other on the market.This unique design provides for quick, solid setup and clamping. As shown at right, Screw 'A' sets jaw opening and Knob 'B' provides positive lock down, clamping the part tight.The unique positioning joints allow quick, easy setup and positive, solid lock down. Bump or move...
$462.00
Product SKU:
2200
PROFESSIONAL SOLDERING FIXTURE 3RD ARM ATTACHMENT
Our #2201 3rd Arm Attachment is designed for use with our #2200 Professional Soldering Fixture fo...
Our #2201 3rd Arm Attachment is designed for use with our #2200 Professional Soldering Fixture for soldering applications that require athird clamp. Easily attaches to either the main arm or the upright base support.
$222.00
Product SKU:
2201
*DISCONTINUED*
Our Punch and Thread Cutting Tool is an excellentaddition to any woodwind bench. Precision design...
Our Punch and Thread Cutting Tool is an excellentaddition to any woodwind bench. Precision designed and constructed to perform the followingtasks: key pin removal and installation thread cutting hinge rods flattening ends of needle springs Comes complete with: Main tool frame Drill chuck - open bore - capacity 0.015" - 0.25" (0.4mm - 6.5mm) 3 Key pin punches 3 Key hinge bases - 2 'V' blocks and 1 lead block Hammer punch & Anvil base - tool steel for ...
$270.00
Product SKU:
2780
Save 10% over individual price, this set of 6 malletscontains one each of: 4 Stand...
Save 10% over individual price, this set of 6 malletscontains one each of: 4 Standard WeightMallets#6772, #6773, #6774, #6775 2 Heavy Weight Mallets#6780 and #6781
$355.91
Product SKU:
6770
ROLLER CONE 6" x 6" (152mm x 152mm)
Made from high density thermoplastic this cone is precision machined and polished with full radiu...
Made from high density thermoplastic this cone is precision machined and polished with full radiused end. Mounting stem is made from rust free stainless steel. Designed for bell flares on french horn, baritone, euphonium, tuba, sousaphone and other large bore instruments. Diameter: 6" tapering to 1.5" (152mm - 38mm) Length (not including mounting stem): 6" (152mm) Note: this item requires #2251N Bearing Module for operation.See all Modular Roller Dent Roller System Components About our Modul...
$143.75
Product SKU:
2268N
ROLLER CONE CONCAVE 6" x 6" (152mm x 152mm)
Made from high density thermoplastic this cone is precision machined and polished with full radiu...
Made from high density thermoplastic this cone is precision machined and polished with full radiused end. Mounting stem is made from rust free stainless steel. Designed for bell flares on french horn, baritone, euphonium, tuba, sousaphone and other large bore instruments. Concave profile works well for burnishing. Diameter: 6" tapering to 1.5" (152mm - 38mm) Length (not including mounting stem): 6" (152mm) Note: this item requires #2251N Bearing Module for operation.See all Modular Roller De...
$163.75
Product SKU:
2267N
This assortment provides a good start-up selection to cover most saxophone models. Inlcudes both...
This assortment provides a good start-up selection to cover most saxophone models. Inlcudes bothPR-207M plain (no resonator) pads and PR-210M plastic resonator (Selmer style) pads.Diameter sizes range from 9/32" to 69/32" with graduations by 1/32". Labeled packaging for easy reordering. Total of 208 pads. For list of sizes and quantities in assortment go to PR-210M ASST List.
$379.27
Product SKU:
PR-210M ASST
*DISCONTINUED*
SAXOPHONE WORK FIXTURE CURVED SOPRANO ADAPTER
Our Curved Soprano Saxophone Attachment is designed to be used with our #2000 Saxophone Work Fixt...
Our Curved Soprano Saxophone Attachment is designed to be used with our #2000 Saxophone Work Fixture, providing all of the fixture's features for working on curved soprano saxophones (for straight sopranos see our #2001 Accessory Kit.The attachment fits onto the saddle receiver of the saxophone work fixture and the bell of the saxophone attaches to the attachment plate with 4 non-marring cones. Securely holds instrument and safe to finish.
$135.00
Product SKU:
2002
Selmer 1430P Bass Clarinet
SELMER 1430P BASS CLARINET PAD SET - OEM
OEM (original equipment from manufacturer) bass clarinet pad set - leather.Fits models: Selmer 14...
OEM (original equipment from manufacturer) bass clarinet pad set - leather.Fits models: Selmer 1430P
$186.03
Product SKU:
S66009
The semi-pro leak light system provides a light leak setup with an emphasis on saxophone repair.
The #8422 Semi-Pro Leak Light System has all the features of the standard system but with more em...
The #8422 Semi-Pro Leak Light System has all the features of the standard system but with more emphasis on saxophone repair. The 20" fluorescent lamp has a real advantage over the 12" lamp in that it will completely light up both upper and lower stacks of alto sax and nearly both stacks of a tenor. By going in through the low C or Eb tone holes on a baritone sax, the 6" lamp is a great improvement over a single incandescent lamp. Designed to work on 110-120 volt power source. For 220-240 volt...
$345.96
Product SKU:
8422
Holton Sousaphone BB300, BB310
SHANK / MOUTHPIPE CROOK ASSMBLY
Sousaphone shank / mouthpipe crook assembly.Fits models: Holton BB300 Holton BB310
Sousaphone shank / mouthpipe crook assembly.Fits models: Holton BB300 Holton BB310
$250.26
Product SKU:
H466200
SLIDE CROOK - 3RD VALVE F SIDE
Fits Conn, Olds, Jupiter and many other popular models.Does not fit Holton Farkas (models H109 t...
Fits Conn, Olds, Jupiter and many other popular models.Does not fit Holton Farkas (models H109 thru H281). SPECIFICATIONS: bore (inside diameter): 0.460" (11.7mm) outside diameter: 0.518" (13.2mm) distance tube center to tube center: 0.77" (19.5mm)
$116.00
Product SKU:
9576
Our SPRINGWINDER is precision designed and constructed for making all types of rotary valve lever...
Our SPRINGWINDER is precision designed and constructed for making all types of rotary valve lever springs as well any style or size of waterkey spring. No longer necessary to stock a large variety of different shapes and sizes of springs, this sturdily built tool will easily make a perfectly formed, factory like spring. Simply choose the correct diameter spring wire, cut off the necessary length, and in 1-2 minutes the spring is ready for installation. Professional shops will especially enjoy...
$212.75
Product SKU:
2516
The #8420 STANDARD LEAK LIGHT SYSTEM is great for the beginning shop, offering lamps necessary fo...
The #8420 STANDARD LEAK LIGHT SYSTEM is great for the beginning shop, offering lamps necessary for most repairs with a versatile control unit to allow expansion to all of our other available lamps. Designed to work on 110-120 volt power source. For 220-240 volt power source order one of our voltage converters. Includes one each of the following: #8091 Control Unit #8112 Fluorescent 12" Lamp with Cord & Plug #8151 Micro Incandescent Lamp #8150 Micro Incandescent Cord Plug
$306.20
Product SKU:
8420
Our #2775 Standard Soldering Fixture offers an affordable alternative to our #2200 Professional S...
Our #2775 Standard Soldering Fixture offers an affordable alternative to our #2200 Professional Soldering Fixture.Arms are machined from hefty 1/2" (12.7mm) aluminum rod which provides plenty of support and eliminates the unwanted spring-like action found with thinner steel arms. Each arm is designed with 4 pivot points, allowing for maximum positioning flexibility. Overall arm extension is a generous 11" (28cm), giving extra flexibility for clamping setup as well as for holding parts like sa...
$180.00
Product SKU:
2775
TAP & DIE ASSORTMENT - ALL METRIC SIZES
Assortment of 9 taps and 9 dies includes one each of thefollowing sizes: 1.7 x 0.35 2.5 x 0.45 ...
Assortment of 9 taps and 9 dies includes one each of thefollowing sizes: 1.7 x 0.35 2.5 x 0.45 3.5 x 0.60 2.0 x 0.40 3.0 x 0.50 4.0 x 0.70 2.3 x 0.40 3.0 x 0.60 4.0 x 0.75 * General Purpose Plug Taps andAdjustable Dies* High Carbon Steel* Metric Sizes* Die Outside Diameter: 13/16" (20.6mm)
$264.35
Product SKU:
6384
TAP & DIE ASSORTMENT - ALL STANDARD SIZES
Assortment of 22 taps and 22 dies includes one each of thefollowing sizes: 0-80 2-56 4-36 5-44 ...
Assortment of 22 taps and 22 dies includes one each of thefollowing sizes: 0-80 2-56 4-36 5-44 6-48 10-24 1-56 2-64 4-40 6-32 8-32 10-32 1-64 3-48 4-48 6-36 8-36 1-72 3-56 5-40 6-40 8-40 * General Purpose Plug Taps andAdjustable Dies* High Carbon Steel* Standard Machine Thread Sizes* Die Outside Diameter: 13/16" (20.6mm)
$490.77
Product SKU:
6373
TAP & DIE ASSORTMENT - STARTER SET - STANDARD S...
Assortment of 11 taps and 11 dies includes one each of the followingsizes: 1-56 2-64 6-36 1-...
Assortment of 11 taps and 11 dies includes one each of the followingsizes: 1-56 2-64 6-36 1-64 3-48 8-32 1-72 3-56 8-36 2-56 6-32 * General Purpose Plug Taps andAdjustable Dies* High Carbon Steel* Standard Machine Thread Sizes* Die Outside Diameter: 13/16" (20.6mm)
$177.22
Product SKU:
6376