Over $10

Saxophone side Bb key - nickel

SIDE Bb KEY - NICKEL

Saxophone side Bb key - nickelFits alto sax models: Jupiter 667GN - after serial number 290000

Saxophone side Bb key - nickelFits alto sax models: Jupiter 667GN - after serial number 290000

Saxophone side C key

SIDE C KEY

Saxophone side C keyFits tenor sax models: Vito 7131T (Japan) Vito 7131TK (Japan)

Saxophone side C keyFits tenor sax models: Vito 7131T (Japan) Vito 7131TK (Japan)

Saxophone side C lever

SIDE C LEVER

Saxophone side C leverFits alto sax models: Vito 7133

Saxophone side C leverFits alto sax models: Vito 7133

Saxophone side F# key guard

SIDE F# KEY GUARD

Saxophone side F# key guard. Solder on.Fits alto sax models: Jupiter 667GN Jupiter 767BL Jupiter ...

Saxophone side F# key guard. Solder on.Fits alto sax models: Jupiter 667GN Jupiter 767BL Jupiter 767GL Jupiter 869SG Fits tenor sax models: Jupiter 687GN Jupiter 787BL Jupiter 787GL Jupiter 889SG Fits bari sax models: Jupiter 593BL Jupiter 593GL Jupiter 893SG

SLIDE ANGLE BRACE

French horn slide angle brace. Flanges fit pipes with approximate 0.53 (13.5mm) outside diameter....

French horn slide angle brace. Flanges fit pipes with approximate 0.53 (13.5mm) outside diameter. Sold by each.Fits models: Holton H109 Holton H177 Holton H178 Holton H179 Holton H180 Holton H181 Holton H277 Holton H278 Holton H279 Holton H280 Holton H281 Holton H378 Holton H379

SLIDE BRACE

French horn slide brace. Flanges fit pipes with approximate 0.53 (13.5mm) outside diameter. Fits ...

French horn slide brace. Flanges fit pipes with approximate 0.53 (13.5mm) outside diameter. Fits all Holton and many others models.

SLIDE CROOK - 1ST & 2ND VALVE B FLAT SIDE, 2ND ...

Fits Conn, Olds, Jupiter and many other popular models.Does not fit Holton Farkas (models H109 ...

Fits Conn, Olds, Jupiter and many other popular models.Does not fit Holton Farkas (models H109 thru H281). SPECIFICATIONS: bore (inside diameter): 0.460" (11.7mm) outside diameter: 0.518" (13.2mm) distance tube center to tube center: 0.77" (19.5mm)

SLIDE CROOK - 1ST VALVE F SIDE

Fits Conn, Olds, Jupiter and many other popular models.Does not fit Holton Farkas (models H109 ...

Fits Conn, Olds, Jupiter and many other popular models.Does not fit Holton Farkas (models H109 thru H281). SPECIFICATIONS: bore (inside diameter): 0.460" (11.7mm) outside diameter: 0.518" (13.2mm) distance tube center to tube center: 0.77" (19.5mm)

Trombone / bass trombone slide lock lug

SLIDE LOCK LUG

Trombone / bass trombone slide lock lug. Solder on installation.Fits trombone models: Holton TR10...

Trombone / bass trombone slide lock lug. Solder on installation.Fits trombone models: Holton TR100 Holton TR101 Holton TR150 Holton TR156 Holton TR158 Holton TR160 Holton TR161 Holton TR395 Superbone Holton TR602 Collegiate Holton TR680 Collegiate Fits bass trombone models: Holton TR180 Holton TR181 Holton TR183 Holton TR280 Holton TR281

SLOW CURE 30 MINUTE EPOXY

SLOW-CURETM 30 Minute Epoxy is a professional grade adhesive that cures to a higher strength than...

SLOW-CURETM 30 Minute Epoxy is a professional grade adhesive that cures to a higher strength than our 5 minute epoxy. Bonded items can be handled after 8 hours. Full strength is reached in 24 hours. Squeeze out equal length beads of resin and hardener, then mix together thoroughly with a popsicle stick or scrap piece of material. Smooth, non-porous surfaces should be roughened with coarse sandpaper to improve adhesion. Working and clamping time is 30 minutes. Note: mixing large quantities wi...

SMALL INCANDESCENT CORD W/ PLUG & SOCKET

ABOUT OUR LEAK LIGHTS We offer a wide variety of leak light control units and lamps t...

ABOUT OUR LEAK LIGHTS We offer a wide variety of leak light control units and lamps to meet all the demands of the repair shop, and with versatility in mind, our leak lights can be purchased either as separate components to meet individual needs, or as a packaged system.IMPORTANT NOTE: All of our fluorescent and incandescent lamps with cord and plug require a Control Unit for operation. Our #8125 Incandescent Cord, Plug & Socket is used with our #8221 Small Incand...

SNAPPER SLIDE PULLER

Designed for large bore brass instruments such astubas, sousaphones, baritones, and euphoniums, o...

Designed for large bore brass instruments such astubas, sousaphones, baritones, and euphoniums, our Snapper Slide Puller is hasproven to be a well used item in anyrepair shop. Simple to use, it can quickly break loose many stuck tuning slides without damaging or marring the instrument.Simply run the loop end around theslide crook and bring thehandle through the loop. While holding the instrumentstationary, grasp the handle and apply a sharp rap.The steel handle weighs a hefty 1 lb. (0.45 kg) ...

SOLDER 50/50 - 1/16" - 1 LB. (454gr) SPOOL

All of our solders are guaranteed virgin metals. Sold in 1 lb. (454g) spool. SPECIFICATIONS: al...

All of our solders are guaranteed virgin metals. Sold in 1 lb. (454g) spool. SPECIFICATIONS: alloy: 50% tin / 50% lead diameter: 1/16" (1.6mm) Which Solder & Flux To Use? Material Safety Data Sheet . . . Note: AdobeAcrobat Reader? required to view or print this file.