Over $10

SOLDER-IN SLIDE PLUG .500 X 4"

ABOUT OURSOLDER-IN SLIDE PLUGS All too often it seems easier totry various 'short cut'...

ABOUT OURSOLDER-IN SLIDE PLUGS All too often it seems easier totry various 'short cut' methods of removing frozen slides rather than proceedingto what many times has to be done in the long run; that is, unsoldering thecrook and soldering a plug into the stuck slide. The plug can then be eithergrasped with a pair of vise grips or clamped in a vise to work the pipe out. It has been the experience inour shop that if a slide does not come out with a minimum of effort (see our #2440T-Sl...

SOLDER-IN SLIDE PLUGS

ABOUT OURSOLDER-IN SLIDE PLUGS All too often it seems easier totry various 'short cut'...

ABOUT OURSOLDER-IN SLIDE PLUGS All too often it seems easier totry various 'short cut' methods of removing frozen slides rather than proceedingto what many times has to be done in the long run; that is, unsoldering thecrook and soldering a plug into the stuck slide. The plug can then be eithergrasped with a pair of vise grips or clamped in a vise to work the pipe out. It has been the experience inour shop that if a slide does not come out with a minimum of effort (see our #2440T-Sl...

*DISCONTINUED*

SOLDER-ON DENT KNOCKER KIT

Our Solder-On Dent Knocker Kit is designed to pull up dents that are either impractical or not po...

Our Solder-On Dent Knocker Kit is designed to pull up dents that are either impractical or not possible to get to with a dent ball. For example, when a trumpet bell crook is crushed so badly that even the smallest dent ball won't work, this tool will raise the dent far enough to begin using a dent ball and driver.Or when the job requires disassembly of the instrument to get to the dent, such as on a baritone saxophone neck, the Solder-On Dent Knocker can be used to raise the dent to restore t...

SPECTRAGREEN ROTARY VALVE CORD

Our SpectraGreen rotary valve cord offers repair technician's a totally new product for restringi...

Our SpectraGreen rotary valve cord offers repair technician's a totally new product for restringing french horns and other rotary valve instruments.Spectra is a synthetic fiber with a much higher resistance to abrasion than nylon and Dacron - you'll experience this when you try to cut a length off of the spool with a scissors or razor blade - it is tough to cut.And besides being totally impervious to water and oil, Spectra also has practically no stretch to it - 75% less than nylon and...

STANDARD DENT ROD - 3/4" (19.05 mm) x 4' (122 cm)

Our 3/4" (19.05mm) diameter x 48" (122cm) long dent rod is a standard in the industry for dent re...

Our 3/4" (19.05mm) diameter x 48" (122cm) long dent rod is a standard in the industry for dent removal on saxophones and medium to large bore brass instruments. One end is machine tapered and fitted with 3/8-16 threads and the other end is fitted with 1/2-13 threads.Rather than simply threading the end of the rod we have fitted the end with a case hardened threaded insert. Should the threads ever become damaged a new insert can be easily and inexpensively installed rather than having to repla...

STANDARD DENT ROD - 3/4" (19.05mm) - STEEL

Our standard 3/4" (19.05mm) diameter steel dent rod is tapered at one end and fitted with 3/8-16 ...

Our standard 3/4" (19.05mm) diameter steel dent rod is tapered at one end and fitted with 3/8-16 threads. The other end is fitted with 1/2-13 threads. The 48" (1.22m) length works great for all saxophones as well as large brass instrument.Rather than simply thread the ends of the rods we have fitted each end with case hardened threaded inserts. Should the threads ever become damaged or break a new insert can be easily and inexpensively installed rather than having to replace the entire rod.Ov...

STANDARD LEAK LIGHT SYSTEM

The #8420 STANDARD LEAK LIGHT SYSTEM is great for the beginning shop, offering lamps necessary fo...

The #8420 STANDARD LEAK LIGHT SYSTEM is great for the beginning shop, offering lamps necessary for most repairs with a versatile control unit to allow expansion to all of our other available lamps. Designed to work on 110-120 volt power source. For 220-240 volt power source order one of our voltage converters. Includes one each of the following: #8091 Control Unit #8112 Fluorescent 12" Lamp with Cord & Plug #8151 Micro Incandescent Lamp #8150 Micro Incandescent Cord Plug

STANDARD POP RIVET 1/8" x 3/4" - ALL STEEL

Standard pop rivet made from all steel for maximum holding power. Backup washer required for mo...

Standard pop rivet made from all steel for maximum holding power. Backup washer required for most instrument case applications. Use standard rivet gun for installation. SPECIFICATIONS: body diameter: 1/8" (3.2mm) body length: 3/4" (19mm) body material: steel mandrel material: steel grip range: 0.500" - 0.625" (12.7mm - 15.9mm) QUANTITY DISCOUNT: Order 5 packs and receive 10% discount

STANDARD SOLDERING FIXTURE ADDITIONAL ARM

Additional arm for use with our #2775 Standard Soldering Fixture when soldering applications requ...

Additional arm for use with our #2775 Standard Soldering Fixture when soldering applications require a third clamp. Easily attaches to the fixture base.

STEEL BENCH BLOCK

Made from high quality tool steel, these precisionbench blocks are ground flat, polished, and cas...

Made from high quality tool steel, these precisionbench blocks are ground flat, polished, and case-hardened. A necessity on anywoodwind bench for flattening spring ends, leveling key cups, etc.Dimensions: 0.750" (19.0mm) thick 2.500" (63.5mm) square

STEP 1 - TESCH EMERALD DEGREASER

YOU WILL RECIEVE UPS NOTIFCATION WHEN THE ORDER IS PLACED, BUT THIS PRODUCT IS DROP SHIPPED. PLEA...

YOU WILL RECIEVE UPS NOTIFCATION WHEN THE ORDER IS PLACED, BUT THIS PRODUCT IS DROP SHIPPED. PLEASE ALLOW 5 - 7 BUSINESS DAYS TO SHIP.  Tesch's Emerald Degreaser Concentrate is used by repair technicians as a pre-cleaning solution for moderately to heavily soiled instruments before immersion into Classic Brass cleaning solution. 1-3 minute straight dip, water rinse and immerse into Classic Brass Loosens dirt and removes excess grease, grime, and rubbing compounds; eliminating the barrie...

STEP 2 - TESCH POWER BRASS CLEANER

YOU WILL RECIEVE UPS NOTIFCATION WHEN THE ORDER IS PLACED, BUT THIS PRODUCT IS DROP SHIPPED. PLEA...

YOU WILL RECIEVE UPS NOTIFCATION WHEN THE ORDER IS PLACED, BUT THIS PRODUCT IS DROP SHIPPED. PLEASE ALLOW 5 - 7 BUSINESS DAYS TO SHIP.  Tesch's new POWER BRASS is a fast-acting acid cleaner that quickly removes heavy scale build-up from slides, valves, etc. And it provides a highly effective alternative to the corrosive, toxic cleaners that have been used in the industry for years. Use as a pre-dip for Classic Brass: pre-cleaning with Power Brass for up to one minute before immersion into Cla...

French horn stop arm for 1st and 2nd rotors

STOP ARM #1-2

French horn stop arm for 1st and 2nd rotorsFits models: Jupiter 752L Jupiter 754L Jupiter 852L ...

French horn stop arm for 1st and 2nd rotorsFits models: Jupiter 752L Jupiter 754L Jupiter 852L Jupiter 854L