Over $10

SLIDE CROOK - 3RD VALVE F SIDE

Fits Conn, Olds, Jupiter and many other popular models.Does not fit Holton Farkas (models H109 t...

Fits Conn, Olds, Jupiter and many other popular models.Does not fit Holton Farkas (models H109 thru H281). SPECIFICATIONS: bore (inside diameter): 0.460" (11.7mm) outside diameter: 0.518" (13.2mm) distance tube center to tube center: 0.77" (19.5mm)

SLIDE LOCK RING - NICKEL

Jupiter trombone slide lock ring. Nickel plated. This is not threaded style.

Jupiter trombone slide lock ring. Nickel plated. This is not threaded style.

SLOW CURE 30 MINUTE EPOXY

SLOW-CURETM 30 Minute Epoxy is a professional grade adhesive that cures to a higher strength than...

SLOW-CURETM 30 Minute Epoxy is a professional grade adhesive that cures to a higher strength than our 5 minute epoxy. Bonded items can be handled after 8 hours. Full strength is reached in 24 hours. Squeeze out equal length beads of resin and hardener, then mix together thoroughly with a popsicle stick or scrap piece of material. Smooth, non-porous surfaces should be roughened with coarse sandpaper to improve adhesion. Working and clamping time is 30 minutes. Note: mixing large quantities wi...

SMALL INCANDESCENT CORD W/ PLUG & SOCKET

ABOUT OUR LEAK LIGHTS We offer a wide variety of leak light control units and lamps t...

ABOUT OUR LEAK LIGHTS We offer a wide variety of leak light control units and lamps to meet all the demands of the repair shop, and with versatility in mind, our leak lights can be purchased either as separate components to meet individual needs, or as a packaged system.IMPORTANT NOTE: All of our fluorescent and incandescent lamps with cord and plug require a Control Unit for operation. Our #8125 Incandescent Cord, Plug & Socket is used with our #8221 Small Incand...

SOLDER 50/50 - 1/16" - 1 LB. (454gr) SPOOL

All of our solders are guaranteed virgin metals. Sold in 1 lb. (454g) spool. SPECIFICATIONS: al...

All of our solders are guaranteed virgin metals. Sold in 1 lb. (454g) spool. SPECIFICATIONS: alloy: 50% tin / 50% lead diameter: 1/16" (1.6mm) Which Solder & Flux To Use? Material Safety Data Sheet . . . Note: AdobeAcrobat Reader? required to view or print this file.

SOLDER 60/40 - 1/16" - 1 LB. (454gr) SPOOL

All of our solders are guaranteed virgin metals. Sold in 1 lb. (454g) spool. SPECIFICATIONS: al...

All of our solders are guaranteed virgin metals. Sold in 1 lb. (454g) spool. SPECIFICATIONS: alloy: 60% tin / 40% lead diameter: 1/16" (1.6mm) Which Solder & Flux To Use? Material Safety Data Sheet . . . Note: AdobeAcrobat Reader? required to view or print this file.

SOLDER 60/40 - 1/32" - 1 LB. (454gr) SPOOL

All of our solders are guaranteed virgin metals. Sold in 1 lb. (454g) spool. SPECIFICATIONS: a...

All of our solders are guaranteed virgin metals. Sold in 1 lb. (454g) spool. SPECIFICATIONS: alloy: 60% tin / 40% lead diameter: 1/32" (0.8mm) Which Solder & Flux To Use? Material Safety Data Sheet . . . Note: AdobeAcrobat Reader? required to view or print this file.

SOLDER BOARD

Durable, smooth-surfaced non-asbestos soldering board. Won't flake or crumble. High heat reflecti...

Durable, smooth-surfaced non-asbestos soldering board. Won't flake or crumble. High heat reflective with fast cool-down time.DIMENSIONS: width: 6" (15.24mm) length: 12" (30.48cm) thickness: 1/2" (12.7mm)

SOLDER FLUX - JOHNSON'S - 32 OZ (946ml)

A good general purpose flux for all tin/lead alloy solders, our Johnson's 'Original' Soldering Fl...

A good general purpose flux for all tin/lead alloy solders, our Johnson's 'Original' Soldering Fluid provides excellent cleaning and deoxidizing. Sold in 32 oz. (946ml) bottle. For a slightly less aggressive flux see our Lloyd's #6 Solder Flux.   Which Solder & Flux To Use? Safety Data Sheet . . . Note: AdobeAcrobat Reader required to view or print this file.

SOLDER-IN SLIDE PLUG .500 X 4"

ABOUT OURSOLDER-IN SLIDE PLUGS All too often it seems easier totry various 'short cut'...

ABOUT OURSOLDER-IN SLIDE PLUGS All too often it seems easier totry various 'short cut' methods of removing frozen slides rather than proceedingto what many times has to be done in the long run; that is, unsoldering thecrook and soldering a plug into the stuck slide. The plug can then be eithergrasped with a pair of vise grips or clamped in a vise to work the pipe out. It has been the experience inour shop that if a slide does not come out with a minimum of effort (see our #2440T-Sl...

SOLDER-IN SLIDE PLUG 1.0" X 4"

ABOUT OURSOLDER-IN SLIDE PLUGS All too often it seems easier totry various 'short cut'...

ABOUT OURSOLDER-IN SLIDE PLUGS All too often it seems easier totry various 'short cut' methods of removing frozen slides rather than proceedingto what many times has to be done in the long run; that is, unsoldering thecrook and soldering a plug into the stuck slide. The plug can then be eithergrasped with a pair of vise grips or clamped in a vise to work the pipe out. It has been the experience inour shop that if a slide does not come out with a minimum of effort (see our #2440T-Sl...

STANDARD DENT ROD - 3/4" (19.05 mm) x 4' (122 cm)

Our 3/4" (19.05mm) diameter x 48" (122cm) long dent rod is a standard in the industry for dent re...

Our 3/4" (19.05mm) diameter x 48" (122cm) long dent rod is a standard in the industry for dent removal on saxophones and medium to large bore brass instruments. One end is machine tapered and fitted with 3/8-16 threads and the other end is fitted with 1/2-13 threads.Rather than simply threading the end of the rod we have fitted the end with a case hardened threaded insert. Should the threads ever become damaged a new insert can be easily and inexpensively installed rather than having to repla...

STANDARD DENT ROD - 3/4" (19.05mm) - STEEL

Our standard 3/4" (19.05mm) diameter steel dent rod is tapered at one end and fitted with 3/8-16 ...

Our standard 3/4" (19.05mm) diameter steel dent rod is tapered at one end and fitted with 3/8-16 threads. The other end is fitted with 1/2-13 threads. The 48" (1.22m) length works great for all saxophones as well as large brass instrument.Rather than simply thread the ends of the rods we have fitted each end with case hardened threaded inserts. Should the threads ever become damaged or break a new insert can be easily and inexpensively installed rather than having to replace the entire rod.Ov...