TOOLS

*DISCONTINUED*

REVERSIBLE BENCH PEG

Our newly re-designed #2401 Reversible Bench Peg works great for holding small woodwind bodies (B...

Our newly re-designed #2401 Reversible Bench Peg works great for holding small woodwind bodies (Bb clarinet, oboe, etc.) while trimming or sanding tenon corks. The peg supports the end of the instrument joint that needs the cork trimmed and the technician's body supports the opposite end.Nicely machined from non-corrosive aluminum and high density thermoplastic, the reversible design offers a tapered convex surface that fits inside the bore to safely support the instrument and a shallow conca...

DENT ROD ELBOW 3/8-16 - 65 DEGREE

Our Dent Rod Elbows are designed to work as extensions on a standard dent rod for changing...

Our Dent Rod Elbows are designed to work as extensions on a standard dent rod for changing the angle and position of the dent ball. Great for sax bow work. Designed to screw onto dent rod with 3/8-16 thread size and use dent balls with same thread.

DENT ROD ELBOW 3/8-16 - 45 DEGREE

Our Dent Rod Elbows are designed to work as extensions on a standard dent rod for changing...

Our Dent Rod Elbows are designed to work as extensions on a standard dent rod for changing the angle and position of the dent ball. Great for sax bow work. Designed to screw onto dent rod with 3/8-16 thread size and use dent balls with same thread.

TITAN DENT ROLLER

Our #2242 Titan Dent Roller is designed for rolling out dents in medium and large sized bells inc...

Our #2242 Titan Dent Roller is designed for rolling out dents in medium and large sized bells including tuba, sousaphone, baritone/euphonium and large bore marching horns. Made from precision stainless steel tubing, the roller is centerless ground and polished and then fitted to a hefty 0.750" (19.05mm) vise mount shaft using two precision roller bearings to allow for smooth rolling action. The leading end of the roller is fitted with a radiused ABS plastic nose, eliminating any sharp edges.S...

*DISCONTINUED*

WOOD FLEX MANDREL - TRUMPET / CORNET

Our Wood Flex Trumpet Mandrel offers a real improvement over conventional type tab...

Our Wood Flex Trumpet Mandrel offers a real improvement over conventional type table leg sticks. Used for holding instruments for all types of repairs, our mandrels are machine tapered from hardwood and then cut and quartered through the length of the tapered section.This unique design allows the sides of the mandrel to flex as the mandrel comes into contact with the inside of the instrument bell, and thus provides more contact area between th...

UPPER V BLOCK 'SOFT JAW'

For clamping a tube in our #2227 Votaw Mandrel Vise we offer an aluminum 'V' block to be placed o...

For clamping a tube in our #2227 Votaw Mandrel Vise we offer an aluminum 'V' block to be placed over the top of the tube. Helps distribute the pressure from the vise screw and prevent crushing or distortion of the tube.

PROFESSIONAL SOLDERING FIXTURE 3RD ARM ATTACHMENT

Our #2201 3rd Arm Attachment is designed for use with our #2200 Professional Soldering Fixture fo...

Our #2201 3rd Arm Attachment is designed for use with our #2200 Professional Soldering Fixture for soldering applications that require athird clamp. Easily attaches to either the main arm or the upright base support.

*DISCONTINUED*

PROFESSIONAL SOLDERING FIXTURE

Our Professional Soldering Fixture is the finest available. Constructed from a combination of sta...

Our Professional Soldering Fixture is the finest available. Constructed from a combination of stainless steel and quality 6061 T6 aluminum, our fixture is precision designed and machined, surpassing any other on the market.This unique design provides for quick, solid setup and clamping. As shown at right, Screw 'A' sets jaw opening and Knob 'B' provides positive lock down, clamping the part tight.The unique positioning joints allow quick, easy setup and positive, solid lock down. Bump or move...

CURVED 18" DENT ROD - SLIGHT BEND

Machined from rust free 303 stainless steel Works great on sax necks, crooks, etc. Overall dia...

Machined from rust free 303 stainless steel Works great on sax necks, crooks, etc. Overall diameter: 0.5" (12.7mm) both ends taper to 0.375" (9.52mm) Overall length approximately 18" (45.7cm) Both ends threaded 3/8"-16

STANDARD DENT ROD - 3/4" (19.05mm) - STEEL

Our standard 3/4" (19.05mm) diameter steel dent rod is tapered at one end and fitted with 3/8-16 ...

Our standard 3/4" (19.05mm) diameter steel dent rod is tapered at one end and fitted with 3/8-16 threads. The other end is fitted with 1/2-13 threads. The 48" (1.22m) length works great for all saxophones as well as large brass instrument.Rather than simply thread the ends of the rods we have fitted each end with case hardened threaded inserts. Should the threads ever become damaged or break a new insert can be easily and inexpensively installed rather than having to replace the entire rod.Ov...

*DISCONTINUED*

ROLLER MANDREL 3/4" x 10" (19mm x 25cm)

Made from rust free stainless steel this mandrel is precision machined and polished with full rad...

Made from rust free stainless steel this mandrel is precision machined and polished with full radiused end. Works well for trumpet, trombone, and other small bore instruments. Diameter: 0.75" (19mm) Working Length (not including mounting stem): 10" (25cm) Note: this item requires #2251N Bearing Module for operation.See all Modular Roller Dent Roller System Components About our Modular Dent Roller System

FLUTE POLISHING FIXTURE

Our #2115 Flute Polishing Fixture is designed to securely hold a flute main body or foot section ...

Our #2115 Flute Polishing Fixture is designed to securely hold a flute main body or foot section while polishing.The unique design safely supports the instrument in any position.Re-adjustment and rotation is fast and easy.A real time saver. Built from durable, non-corrosive materials.