TOOLS

*DISCONTINUED*

WOOD FLEX MANDREL - TROMBONE

Our Wood Flex Trombone Mandrel offers a real improvement over conventional type table leg ...

Our Wood Flex Trombone Mandrel offers a real improvement over conventional type table leg sticks. Used for holding instruments for all types of repairs, our mandrels are machine tapered from hardwood and then cut and quartered through the length of the tapered section.This unique design allows the sides of the mandrel to flex as the mandrel comes into contact with the inside of the instrument bell, and thus provides more contact area between the bell ...

TRI-AXIAL VISE BASE

Our Tri-Axial Vise Base is designed to offer ultimate versatility to our #2227 Votaw Mandrel Vise...

Our Tri-Axial Vise Base is designed to offer ultimate versatility to our #2227 Votaw Mandrel Vise or our #2465 Mighty Mite II Mandrel Vise (vises sold separately), and provides a means of holding instruments that brings a new standard to instrument repair. Whether you use a mandrel for holding instruments or one of our Horn Discs the base's three axis movement allows for quick, easy, and virtually unlimited positioning. As shown in illustration at right two levers control the following positi...

UPPER V BLOCK 'SOFT JAW'

For clamping a tube in our #2227 Votaw Mandrel Vise we offer an aluminum 'V' block to be placed o...

For clamping a tube in our #2227 Votaw Mandrel Vise we offer an aluminum 'V' block to be placed over the top of the tube. Helps distribute the pressure from the vise screw and prevent crushing or distortion of the tube.

PROFESSIONAL SOLDERING FIXTURE 3RD ARM ATTACHMENT

Our #2201 3rd Arm Attachment is designed for use with our #2200 Professional Soldering Fixture fo...

Our #2201 3rd Arm Attachment is designed for use with our #2200 Professional Soldering Fixture for soldering applications that require athird clamp. Easily attaches to either the main arm or the upright base support.

*DISCONTINUED*

DENT HAMMER - HEAVY DUTY

Our #2128 hammer is excellent for heavy dent removal on larger brass instruments, sax bows, etc.,...

Our #2128 hammer is excellent for heavy dent removal on larger brass instruments, sax bows, etc., providing extra impact to the instrument while still allowing the technician to maintain short, controlled hammer strokes. Similar to the #2127 model hammer, one face of the head has a gradual radius profile measuring 1" (25.4mm) in diameter. The head's other face however has a smaller diameter of 1/2" (12.7mm), providing a small, sharp radius profile for working in tight areas.The hammer head is...

CURVED 18" DENT ROD - MEDIUM BEND

Machined from rust free 303 stainless steel Works great on sax necks, crooks, etc. Overall dia...

Machined from rust free 303 stainless steel Works great on sax necks, crooks, etc. Overall diameter: 0.5" (12.7mm) both ends taper to 0.375" (9.52mm) Overall length approximately 18" (45.7cm) Both ends threaded 3/8"-16

CURVED 18" DENT ROD - SLIGHT BEND

Machined from rust free 303 stainless steel Works great on sax necks, crooks, etc. Overall dia...

Machined from rust free 303 stainless steel Works great on sax necks, crooks, etc. Overall diameter: 0.5" (12.7mm) both ends taper to 0.375" (9.52mm) Overall length approximately 18" (45.7cm) Both ends threaded 3/8"-16

STANDARD DENT ROD - 3/4" (19.05mm) - STAINLESS ...

Machined from rust-free stainless steel, our standard 3/4" (19.05mm) diameter dent rod is tapered...

Machined from rust-free stainless steel, our standard 3/4" (19.05mm) diameter dent rod is tapered at one end and fitted with 3/8-16 threads. The other end is fitted with 1/2-13 threads. The 48" (1.22m) length works great for all saxophones as well as large brass instrument.Rather than simply thread the ends of the rods we have fitted each end with case hardened threaded inserts. Should the threads ever become damaged or break a new insert can be easily and inexpensively installed rather than ...

*DISCONTINUED*

ROLLER MANDREL 3/4" x 10" (19mm x 25cm)

Made from rust free stainless steel this mandrel is precision machined and polished with full rad...

Made from rust free stainless steel this mandrel is precision machined and polished with full radiused end. Works well for trumpet, trombone, and other small bore instruments. Diameter: 0.75" (19mm) Working Length (not including mounting stem): 10" (25cm) Note: this item requires #2251N Bearing Module for operation.See all Modular Roller Dent Roller System Components About our Modular Dent Roller System

RING KEY BENDER

Designed to safely bend and center the ring key over the tone hole. Precision machined from non-c...

Designed to safely bend and center the ring key over the tone hole. Precision machined from non-corrosive aluminum and stainless steel, this tool will work on all Bb soprano clarinets. Will not mar key finish or chip tone hole chimney.

SAXOPHONE WORK FIXTURE ADDITIONAL BASE PLATE

Install additional base plates throughout the shop and easily move the #2000 Saxophone Work Fixtu...

Install additional base plates throughout the shop and easily move the #2000 Saxophone Work Fixture to various work stations. Approximately 6" (152mm) square. Does not include #2006 Screw-in Plug.Note that the #2000 Saxophone Work Fixture is sold with one base included.

*DISCONTINUED*

SAXOPHONE WORK FIXTURE ACCESSORY KIT

This kit consists of a set of 3 attachments that will adapt the #2000 Saxophone Work Fixture to h...

This kit consists of a set of 3 attachments that will adapt the #2000 Saxophone Work Fixture to hold the following instruments: Bass Clarinet - 1 or 2 piece models Alto Clarinet - 1 or 2 piece models Soprano Sax - straight models Bassoon - wing and bass joints Constructed of nickel plated, heavy gauge steel, the accessory kit will provide all of the same advantages for working on these instruments as it does for the saxophone. Operation Instructions and Parts Vie...