TOOLS

WIHA SLOTTED SCREWDRIVER - MEDIUM - 2.5mm x 50mm

SPECIFICATIONS: tip width: medium / 0.098" (2.5mm) blade length: 2.0" (50mm) overall length...

SPECIFICATIONS: tip width: medium / 0.098" (2.5mm) blade length: 2.0" (50mm) overall length: 5.7" (145mm) RECOMMENDED USE: screw type: pivot, long (hinge), and medium key adjustment screws instrument: Flute, Clarinet, Oboe, Piccolo, Bassoon, Saxophone Votaw Tool Company is pleased to offer the Wiha? line of screw drivers. Blades are made of high alloy vanadium-molybdenum steel specially developed for Wiha? and are salt-bath hardened and tempered to provide optimum hardn...

TAP WRENCH - RATCHET ACTION

Designed with ratcheting action this wrench works great for threading posts on saxophones and oth...

Designed with ratcheting action this wrench works great for threading posts on saxophones and other hard to reach places.Sliding handle and 3 position 'gear box' for left or right ratchet and lock position.Holds tap sizes 0 - 1/4" (2mm - 6mm).

6" FLUORESCENT LAMP - REPLACEMENT

Replacement 6" fluorescent lamp for the #8106 unit. Supplied with safetysleeve and two pieces of ...

Replacement 6" fluorescent lamp for the #8106 unit. Supplied with safetysleeve and two pieces of shrink material to cover lamp ends. LAMP DIMENSIONS: length: 6" (15.2cm) diameter (with safety sleeve): 0.660" (16.7mm)

EXCALIBUR SOLDERING & TORCH

A self igniting and cordless Soldering Iron, Hot Air Blower and Butane Torch complete in one grea...

A self igniting and cordless Soldering Iron, Hot Air Blower and Butane Torch complete in one great tool The Piezo Electric instant ignition system provides a quick start-up in any mode. Includes a wide range of tips, wrench, sponge and a tube of solder.5 Tips in total - comes complete with 5 interchangable tips for soldering, hot air blowing, removing adhesives and more. Also comes with 1 tube of solder and wet sponge compartment.Compact storage case holds everything cleanly for quick hassle...

DENT ROD ELBOW 3/8-16 - 30 DEGREE

Our Dent Rod Elbows are designed to work as extensions on a standard dent rod for changing...

Our Dent Rod Elbows are designed to work as extensions on a standard dent rod for changing the angle and position of the dent ball. Great for sax bow work. Designed to screw onto dent rod with 3/8-16 thread size and use dent balls with same thread.

DIE ASSORTMENT - ALL METRIC SIZES

This set of 9 dies will cover all ofthe most common metric sizes used in band instruments. Includ...

This set of 9 dies will cover all ofthe most common metric sizes used in band instruments. Includes one each of thefollowing mm sizes: 1.7 x 0.35 2.5 x 0.45 3.5 x 0.60 2.0 x 0.40 3.0 x 0.50 4.0 x 0.70 2.3 x 0.40 3.0 x 0.60 4.0 x 0.75 * General Purpose Adjustable Dies* High Carbon Steel* Metric Thread Sizes* Outside Diameter: 13/16" (20.6mm)

THREAD REDUCER 3/8-16 FEMALE 5/16-18 MALE

ABOUT OURThread Reducers Our Thread Reducers aredesigned to allow the use of dent balls...

ABOUT OURThread Reducers Our Thread Reducers aredesigned to allow the use of dent balls with a thread size that is differentthan the dent rod thread size. Machined from 12L14 steel with case hardenedthreads. Flats have been machined into reducer's sides to accommodate a wrenchfor tightening reducer onto dent rod.The thread sizes listed indicate each reducers actual thread configuration. Forexample, if your dent rod has 1/2-13 threads and you want to attach a dent ballwith 3/8-16 thr...

DENT ROD ELBOW 3/8-16 - 90 DEGREE

Our Dent Rod Elbows are designed to work as extensions on a standard dent rod for changing...

Our Dent Rod Elbows are designed to work as extensions on a standard dent rod for changing the angle and position of the dent ball. Great for sax bow work. Designed to screw onto dent rod with 3/8-16 thread size and use dent balls with same thread.

DENT ROD CLAMP - 1/2" (12.7mm)

Our Dent Rod Clamps work great for holding dent rods, knuckle tools, or mandrels securely in a st...

Our Dent Rod Clamps work great for holding dent rods, knuckle tools, or mandrels securely in a standard bench vise. Locks rod in tight to prevent slippage and also protects rods from being marred by vise jaws.The two halves of the clamp are secured together to allow easy clamping and positioning in the vise. Slides on and off rod so it can be quickly interchanged with other rods. Works for all 1/2" (12.7mm) diameter rods or mandrels.

WIHA SLOTTED SCREWDRIVER - LARGE - 3.0mm x 150mm

SPECIFICATIONS: tip width: large / 0.118" (3.0mm) blade length: 6.0" (150mm) overall length...

SPECIFICATIONS: tip width: large / 0.118" (3.0mm) blade length: 6.0" (150mm) overall length: 10.2" (260mm) RECOMMENDED USE: screw type: pivot, long (hinge), key guard, and large key adjustment screws instrument: Saxophone, Bassoon Votaw Tool Company is pleased to offer the Wiha™ line of screw drivers. Blades are made of high alloy vanadium-molybdenum steel specially developed for Wiha™ and are salt-bath hardened and tempered to provide optimum hardness, maximum torque t...

TUNGSTEN CARBIDE BUR - TAPER

Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carb...

Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carbide burs. Work great for removing solder and corrosionfrom brass pipes and other fine cutting applications.Standard 1/8" (3.175 mm) diameter shaft will work in all of our ForedomHandheld Power Tools or any high speed hand tool. Maximum speed rating 35,000rpm.Cutter Dimensions: Head Length: 0.5" (12.7 mm) Head Width: 0.25" (6.35 mm) Shaft Length: 1" (25.4 mm) Shaft Diameter: 0.125" (3.175 mm) ...

DIE ASSORTMENT - STARTER SET - STANDARD SIZES

Assortment of 11 dies includes one each of thefollowing sizes: 1-56 2-64 6-36 1-64 3-48 8-32...

Assortment of 11 dies includes one each of thefollowing sizes: 1-56 2-64 6-36 1-64 3-48 8-32 1-72 3-56 8-36 2-56 6-32 * General Purpose AdjustableDies* High Carbon Steel* Machine Screw Thread Sizes* Outside Diameter: 13/16" (20.6mm)

TAP & DIE ASSORTMENT - STARTER SET - STANDARD S...

Assortment of 11 taps and 11 dies includes one each of the followingsizes: 1-56 2-64 6-36 1-...

Assortment of 11 taps and 11 dies includes one each of the followingsizes: 1-56 2-64 6-36 1-64 3-48 8-32 1-72 3-56 8-36 2-56 6-32 * General Purpose Plug Taps andAdjustable Dies* High Carbon Steel* Standard Machine Thread Sizes* Die Outside Diameter: 13/16" (20.6mm)