TOOLS

FOREDOM POWER TOOL WITH COLLET HANDPIECE

Foredom® Flexible Shaft Power Tools are of the highest qualityand have been the standard in preci...

Foredom® Flexible Shaft Power Tools are of the highest qualityand have been the standard in precision industries for many years. Designed withpowerful 1/8 HP ball bearing motors for all types of hand grinding, deburring,buffing or polishing.Smooth running handpieces have a slim, lightweight design and eliminate thevibration, noise and heat associated with motors in other hand held electric orair tools.Features a 1/8 HP, ball bearing, reversible motor with dependable, long lasting performance ...

CONTROL UNIT - INCANDESCENT

Our #8012 Leak Light Control Unit is designed to operate our complete selection of incandescent l...

Our #8012 Leak Light Control Unit is designed to operate our complete selection of incandescent lamps. Features include simultaneous operation of two incandescent lamps, sturdy aluminum chassis, front panel ON/OFF indicator lamp, and grounded power cord. Power requirements: 110-120 volt AC. For 220-240 volt application see our voltage convertor. Dimensions: length: 4.5" (114mm) width: 3.6" (92mm) height: 2.5" (63mm) Lamps and cords sold separately.

PRECISION RULE - 1/32", 1/16", 1mm

Precision stainless steel rule.SPECIFICATIONS: length: 6" (150mm) width: 3/4" (19mm) graduation: ...

Precision stainless steel rule.SPECIFICATIONS: length: 6" (150mm) width: 3/4" (19mm) graduation: edge A: 1.0mm edge B: 1/32", 1/16"

PILOT BUSHING - BELL TENON

Machined from solid brass, our bell tenon pilot bushing is designed and tapered to work on any of...

Machined from solid brass, our bell tenon pilot bushing is designed and tapered to work on any of the plastic body, Bb soprano clarinets listed below, as well as many other models. Takes 3/16" (4.76mm) counterbore pilot. Artley Bundy and Selmer (new and older ebonite) Normandy (older models using ebonite) Vito (new and older ebonite) Yamaha TenonReplacement Helpful Tips TenonReplacement Tooling

TAP ASSORTMENT - STARTER SET - STANDARD SIZES

Assortment of 11 taps includes one each of thefollowing sizes: 1-56 2-64 6-36 1-64 3-48 8-32...

Assortment of 11 taps includes one each of thefollowing sizes: 1-56 2-64 6-36 1-64 3-48 8-32 1-72 3-56 8-36 2-56 6-32 * General Purpose Plug Taps* High Carbon Steel* Standard Machine Thread Sizes

REPLACEMENT BELL TENON - NORMANDY - EBONITE (OLD)

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both...

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both the bore size and corresponding receiver of many popular Bb clarinet models. If you currently do your own tenon repairs, these tenons will greatly speed up the job at a very reasonable price. Simply counterbore body and glue in tenon (we recommend our #3212 extra thick cyanoacrylate with #3213 accelerator). Bore surface may need to be slightly smoothed or feathered in. Dimensions:A: 0.837" (21.26...

MASTER TESTING PLUG ASSORTMENT - NEOPRENE

Complete assortment of neoprene plugs for all woodwind instruments including bassoon. Total of 92...

Complete assortment of neoprene plugs for all woodwind instruments including bassoon. Total of 92 plugs with storage case.Includes 24" (61cm) hose and connector fitting for use with MAG Machine.

TELESCOPING GAGE SET

Six piece set offering range from 0.312" (73.937mm) up to 6.0" (15.240cm). Includes vinyl case.Fe...

Six piece set offering range from 0.312" (73.937mm) up to 6.0" (15.240cm). Includes vinyl case.Features Include: satin chrome finish hardened tool steel contact points rigid handle with self- centering system smooth, constant spring tension lock-down screw

RIVET GUN

Our #2112 Rivet Gun is built using heavy duty formed steel (not cast) construction and offers sli...

Our #2112 Rivet Gun is built using heavy duty formed steel (not cast) construction and offers slim design for getting into tight spaces.Complete with four interchangeable heads for rivet sizes: 3/32" (2.4mm) 1/8" (3.2mm) 5/32" (4.0mm) 3/16" (4.8mm)

MIGHTY MITE II VISE MOUNT PLATE - CLEARANCE

** CLEARANCE ITEM ** This mounting plate is designed to attach to the base of our Mighty Mite II ...

** CLEARANCE ITEM ** This mounting plate is designed to attach to the base of our Mighty Mite II Mandrel Vise so that the vise can be held in a standard flat jaw bench vise. Useful for shops with limited space, or that may have an existing standard vise on a floor mounted vise stand and wish to utilize the benefits of a mandrel vise. Plate is 3/8" (9.5mm) thick and matches the profile of the vise base. Solid steel 1 1/4" (32mm) square bar is welded to the plate bottom. Durable powder coat f...

CARBIDE BUR - TREE POINT

Our carbide cutting burs are used for general all purpose cutting in theshop. From grinding off c...

Our carbide cutting burs are used for general all purpose cutting in theshop. From grinding off case rivets to brass repair, these cutters work quicklyand smoothly on most ferrous and non-ferrous metals including stainless steel,steel alloys, cast iron, etc.Standard 1/8" (3.175 mm) diameter shaft will work in all of our ForedomHandheld Power Tools or any high speed hand tool. Maximum speed rating 35,000rpm.Cutter Dimensions: Head Length: 0.5" (12.7 mm) Head Width: 0.25" (6.35 mm) Shaft Lengt...

TUNGSTEN CARBIDE BUR - ROTOR SAW

Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carb...

Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carbide burs. Work great for removing solder and corrosionfrom brass pipes and other fine cutting applications.Standard 1/8" (3.175 mm) diameter shaft will work in all of our ForedomHandheld Power Tools or any high speed hand tool. Maximum speed rating 35,000rpm.Cutter Dimensions: Head Length: 0.187" (4.76 mm) Head Width: 0.687" (17.46 mm) Shaft Length: 1" (25.4 mm) Shaft Diameter: 0.125" (3.175 mm) ...

TUNGSTEN CARBIDE BUR - BALL NOSE

Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carb...

Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carbide burs. Work great for removing solder and corrosionfrom brass pipes and other fine cutting applications.Standard 1/8" (3.175 mm) diameter shaft will work in all of our ForedomHandheld Power Tools or any high speed hand tool. Maximum speed rating 35,000rpm.Cutter Dimensions: Head Length: 0.5" (12.7 mm) Head Width: 0.25" (6.35 mm) Shaft Length: 1" (25.4 mm) Shaft Diameter: 0.125" (3.175 mm) ...