TOOLS

TUNGSTEN CARBIDE BUR - CYLINDER

Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carb...

Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carbide burs. Work great for removing solder and corrosionfrom brass pipes and other fine cutting applications.Standard 1/8" (3.175 mm) diameter shaft will work in all of our ForedomHandheld Power Tools or any high speed hand tool. Maximum speed rating 35,000rpm.Cutter Dimensions: Head Length: 0.5" (12.7 mm) Head Width: 0.25" (6.35 mm) Shaft Length: 1" (25.4 mm) Shaft Diameter: 0.125" (3.175 mm) ...

HANDPIECE HOLDER

This 'third hand' device clamps to theworkbench allowing operator to bring work to the tool.Handp...

This 'third hand' device clamps to theworkbench allowing operator to bring work to the tool.Handpiece quickly clamps into holder for stationary operation.Unit clamps to workbench up to 1 3/4" (45 mm) thick.Adjustable height up to 10" (26 cm).Works with either chuck or collet style handpiece.

REPLACEMENT INNER SHAFT

Works in any of the following: #6519 or #6519A Flexible Shaft Power Tool #6520 or #6520A Flexible...

Works in any of the following: #6519 or #6519A Flexible Shaft Power Tool #6520 or #6520A Flexible Shaft Power Tool Any Foredom Series S, CC, R, SR, or L motors

DRILL SET - FRACTIONAL WITH INDEXED CASE

> Includes 1 each of Fractional Sizes 1/16" Thru 1/2"> 1/64" Increments> Total 29 Bits&g...

> Includes 1 each of Fractional Sizes 1/16" Thru 1/2"> 1/64" Increments> Total 29 Bits> High Speed Steel> Black Oxide Finish> Standard 118° Point> Standard Jobber Length> Sturdy Indexed Steel Case> Made in U.S.A.

PRECISION RULE - 1/64", 1mm

Precision stainless steel rule. Includes pocket clip thatfunctions as depth or height gauge. Back...

Precision stainless steel rule. Includes pocket clip thatfunctions as depth or height gauge. Back side lists fractional to decimal equivalents.SPECIFICATIONS: length: 6" (150mm) width: 15/32" (12mm) graduation: edge A: 1/64" edge B: 1.0mm

WIHA SLOTTED SCREWDRIVER - X-LARGE - 4.0mm x 60mm

SPECIFICATIONS: tip width: x-large / 0.157" (4.0mm) blade length: 2.4" (60mm) overall lengt...

SPECIFICATIONS: tip width: x-large / 0.157" (4.0mm) blade length: 2.4" (60mm) overall length: 6.7" (170mm) RECOMMENDED USE: screw type: pivot, key guard, valve, and miscellaneous screws instrument: Saxophone, French Horn and miscellaneous brass valve sections Votaw Tool Company is pleased to offer the Wiha? line of screw drivers. Blades are made of high alloy vanadium-molybdenum steel specially developed for Wiha? and are salt-bath hardened and tempered to provide optim...

WIHA SLOTTED SCREWDRIVER - X-LARGE - 3.5mm x 60mm

SPECIFICATIONS: tip width: x-large / 0.140" (3.5mm) blade length: 2.4" (60mm) overall lengt...

SPECIFICATIONS: tip width: x-large / 0.140" (3.5mm) blade length: 2.4" (60mm) overall length: 6.7" (170mm) RECOMMENDED USE: screw type: pivot and key guard screws instrument: Saxophone, Bassoon Votaw Tool Company is pleased to offer the Wiha? line of screw drivers. Blades are made of high alloy vanadium-molybdenum steel specially developed for Wiha? and are salt-bath hardened and tempered to provide optimum hardness, maximum torque transfer and exceptional durability. C...

WIHA HEX DRIVER - 2.0mm x 60mm

SPECIFICATIONS: head size: 2mm blade length: 60mm (2.4") overall length: 145mm (5.7") RECOMME...

SPECIFICATIONS: head size: 2mm blade length: 60mm (2.4") overall length: 145mm (5.7") RECOMMENDED USE: screw type: rotor linkage screws instrument: Bach (and other) Trombones Votaw Tool Company is pleased to offer the Wiha™ line of screw drivers. Blades are made of high alloy vanadium-molybdenum steel specially developed for Wiha™ and are salt-bath hardened and tempered to provide optimum hardness, maximum torque transfer and exceptional durability. Chrome plating assures protection ag...

DIE ASSORTMENT - ALL STANDARD SIZES

Assortment of 22 dies includes one each of thefollowing sizes: 0-80 2-56 4-36 5-44 6-48 10-24 ...

Assortment of 22 dies includes one each of thefollowing sizes: 0-80 2-56 4-36 5-44 6-48 10-24 1-56 2-64 4-40 6-32 8-32 10-32 1-64 3-48 4-48 6-36 8-36 1-72 3-56 5-40 6-40 8-40 * General Purpose AdjustableDies* High Carbon Steel* Machine Screw Thread Sizes* Outside Diameter: 13/16" (20.6mm)

REPLACEMENT BELL TENON - BUNDY - EBONITE (OLD)

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both...

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both the bore size and corresponding receiver of many popular Bb clarinet models. If you currently do your own tenon repairs, these tenons will greatly speed up the job at a very reasonable price. Simply counterbore body and glue in tenon (we recommend our #3212 extra thick cyanoacrylate with #3213 accelerator). Bore surface may need to be slightly smoothed or feathered in. Dimensions:A: 0.857" (21.77...

DISC SANDER BACKING PLATE

This handy bench motor attachment will find lots of uses in the repair shop such as profiling ten...

This handy bench motor attachment will find lots of uses in the repair shop such as profiling tenon and neck corks prior to gluing, cleaning up edge after cutting hinge screws, key tubing, shaping patches, braces etc.Machined from aircraft grade aluminum. Works in any bench motor with 3/8" (9.5mm) capacity jaw or collet. Uses adhesive back sanding disc. Includes one disc each 100 and 180 grit. disc diameter: 3" (76mm) shaft diameter: 3/8" (9.5mm)

THREAD REDUCER 1/2-13 FEMALE 1/4-28 MALE

ABOUT OURThread Reducers Our Thread Reducers aredesigned to allow the use of dent balls...

ABOUT OURThread Reducers Our Thread Reducers aredesigned to allow the use of dent balls with a thread size that is differentthan the dent rod thread size. Machined from 12L14 steel with case hardenedthreads. Flats have been machined into reducer's sides to accommodate a wrenchfor tightening reducer onto dent rod.The thread sizes listed indicate each reducers actual thread configuration. Forexample, if your dent rod has 1/2-13 threads and you want to attach a dent ballwith 3/8-16 thr...

ROLLER CONE 6" x 6" (152mm x 152mm)

Made from high density thermoplastic this cone is precision machined and polished with full radiu...

Made from high density thermoplastic this cone is precision machined and polished with full radiused end. Mounting stem is made from rust free stainless steel. Designed for bell flares on french horn, baritone, euphonium, tuba, sousaphone and other large bore instruments. Diameter: 6" tapering to 1.5" (152mm - 38mm) Length (not including mounting stem): 6" (152mm) Note: this item requires #2251N Bearing Module for operation.See all Modular Roller Dent Roller System Components About our Modul...