It appears that your cart is currently empty
Order online or call us 888-922-6030
TOOLS
For use with chuck style Foredom handpiece.
For use with chuck style Foredom handpiece.
$8.95
Product SKU:
6532
REPLACEMENT BELL TENON - BUNDY - EBONITE (OLD)
Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both...
Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both the bore size and corresponding receiver of many popular Bb clarinet models. If you currently do your own tenon repairs, these tenons will greatly speed up the job at a very reasonable price. Simply counterbore body and glue in tenon (we recommend our #3212 extra thick cyanoacrylate with #3213 accelerator). Bore surface may need to be slightly smoothed or feathered in. Dimensions:A: 0.857" (21.77...
$31.00
Product SKU:
3560B14
This handy bench motor attachment will find lots of uses in the repair shop such as profiling ten...
This handy bench motor attachment will find lots of uses in the repair shop such as profiling tenon and neck corks prior to gluing, cleaning up edge after cutting hinge screws, key tubing, shaping patches, braces etc.Machined from aircraft grade aluminum. Works in any bench motor with 3/8" (9.5mm) capacity jaw or collet. Uses adhesive back sanding disc. Includes one disc each 100 and 180 grit. disc diameter: 3" (76mm) shaft diameter: 3/8" (9.5mm)
$35.00
Product SKU:
2389
THREAD REDUCER 3/8-16 FEMALE 1/4-28 MALE
ABOUT OURThread Reducers Our Thread Reducers aredesigned to allow the use of dent balls...
ABOUT OURThread Reducers Our Thread Reducers aredesigned to allow the use of dent balls with a thread size that is differentthan the dent rod thread size. Machined from 12L14 steel with case hardenedthreads. Flats have been machined into reducer's sides to accommodate a wrenchfor tightening reducer onto dent rod.The thread sizes listed indicate each reducers actual thread configuration. Forexample, if your dent rod has 1/2-13 threads and you want to attach a dent ballwith 3/8-16 thr...
$25.00
Product SKU:
2670
THREAD REDUCER 1/2-13 FEMALE 1/4-28 MALE
ABOUT OURThread Reducers Our Thread Reducers aredesigned to allow the use of dent balls...
ABOUT OURThread Reducers Our Thread Reducers aredesigned to allow the use of dent balls with a thread size that is differentthan the dent rod thread size. Machined from 12L14 steel with case hardenedthreads. Flats have been machined into reducer's sides to accommodate a wrenchfor tightening reducer onto dent rod.The thread sizes listed indicate each reducers actual thread configuration. Forexample, if your dent rod has 1/2-13 threads and you want to attach a dent ballwith 3/8-16 thr...
$25.00
Product SKU:
2664
Our Bell / Mouthpipe Soldering Clamp is designed for clamping trumpet, cornet, and trombon...
Our Bell / Mouthpipe Soldering Clamp is designed for clamping trumpet, cornet, and trombone bell pipes and mouth pipes. Heavy duty, non corrosive design uses a 5/16 (7.92mm) diameter stainless steel threaded shaft that resists bending when under tension. The clamping arms are machined from T6 aluminum and are profiled to allow clearance and access around braces.The most outstanding feature of our clamp is the unique pivoting head which allows the clam...
$83.94
Product SKU:
2612
ROLLER CONE 6" x 6" (152mm x 152mm)
Made from high density thermoplastic this cone is precision machined and polished with full radiu...
Made from high density thermoplastic this cone is precision machined and polished with full radiused end. Mounting stem is made from rust free stainless steel. Designed for bell flares on french horn, baritone, euphonium, tuba, sousaphone and other large bore instruments. Diameter: 6" tapering to 1.5" (152mm - 38mm) Length (not including mounting stem): 6" (152mm) Note: this item requires #2251N Bearing Module for operation.See all Modular Roller Dent Roller System Components About our Modul...
$143.75
Product SKU:
2268N
*DISCONTINUED*
ROLLER CONE CONCAVE 2" x 3" (51mm x 76mm)
Made from high quality rust resistant stainless steel this cone is precision machined and polishe...
Made from high quality rust resistant stainless steel this cone is precision machined and polished with full radiused end. Designed for bell flares on trumpet and cornet. Concave profile works well for burnishing. Diameter: 2" tapering to 0.5" (52mm - 13mm) Length (not including mounting stem): 3" (76mm) Note: this item requires #2251N Bearing Module for operation.See all Modular Roller Dent Roller System Components About our Modular Dent Roller System
$85.00
Product SKU:
2259N
STAINLESS STEEL TUBE BRUSH - OUTSIDE
Works great for cleaning outside of tube prior to soldering. 3/8" - 1/2" (9 - 12mm) 1/2" - 5/8" ...
Works great for cleaning outside of tube prior to soldering. 3/8" - 1/2" (9 - 12mm) 1/2" - 5/8" (13 - 16mm) 3/4" - 7/8" (19 - 22mm)
$6.64
Product SKU:
Made from precision ground drill rod, each finely polished mandrel holds a diameter and roundness...
Made from precision ground drill rod, each finely polished mandrel holds a diameter and roundness tolerance of +/- 0.0005" (0.0127mm), qualities that far surpass other mandrels on the market.All mandrels have a full radius machined and polished on one end to prevent snagging while inserting into badly dented slide pipes and to prevent putting ridges in the crook area. The mandrel's other end is number indexed for easy identification. Overall mandrel length is approximately 36" (91cm).WHICH SI...
$1,031.22
Product SKU:
2080
CLARINET / FLUTE PAD SLICK - CONTOURED
Our clarinet and flute contoured pad slick is made from highly polished tool steel. Great for pad...
Our clarinet and flute contoured pad slick is made from highly polished tool steel. Great for pad skin ironing and pad leveling and adjustment on clarinet, oboe, flute, and piccolo.Thickness: 0.024" (0.61mm)Overall Length: 2-3/4" (70mm)
$9.85
Product SKU:
2365
*DISCONTINUED*
Use for taking mouthpiece measurements. Design based upon a system devised by Erick D. Brand and ...
Use for taking mouthpiece measurements. Design based upon a system devised by Erick D. Brand and utilizes a piece of clear glass upon which is etched an easy to read numbered scale. With the mouthpiece held against the glass, the user inserts various steel feelers between the mouthpiece rails and the glass to plot the curve of the facing and determine the lay of the mouthpiece. For steel feelers any all purpose feel gauge set starting with size 0.0015" will work.Dimensions: 4" (102mm) x 1" (2...
$25.00
Product SKU:
2861
Heavy duty voltage transformer converts 220-240 volt power source for 110-120 volt application. A...
Heavy duty voltage transformer converts 220-240 volt power source for 110-120 volt application. Also converts 110-120 power source for 220-240 volt applications. Excellent for all of our leak light control units and #2350 Pad Cup Heater. Features include: sturdy chassis fuse protected with 2 spare fuses 100 watt capacity 32" (0.8m) lenght power cord Ground / Earth conductor Dimensions: length: 5.2" (132mm) width: 3.7" (94mm) height: 3.6" (92mm) weight: 3.5 lbs (1.6kg
$31.85
Product SKU:
STANDARD DENT ROD - 3/4" (19.05 mm) x 4' (122 cm)
Our 3/4" (19.05mm) diameter x 48" (122cm) long dent rod is a standard in the industry for dent re...
Our 3/4" (19.05mm) diameter x 48" (122cm) long dent rod is a standard in the industry for dent removal on saxophones and medium to large bore brass instruments. One end is machine tapered and fitted with 3/8-16 threads and the other end is fitted with 1/2-13 threads.Rather than simply threading the end of the rod we have fitted the end with a case hardened threaded insert. Should the threads ever become damaged a new insert can be easily and inexpensively installed rather than having to repla...
$58.92
Product SKU:
2300
Our Dent Rod Elbows are designed to work as a dent rod extension for changing the angle and posit...
Our Dent Rod Elbows are designed to work as a dent rod extension for changing the angle and position of the dent ball.Elbows have 3/8-16 female threads that screw onto dent rod threads, and 1/4-28 male threads for dent ball attachment.
$10.00
Product SKU:
2314
*DISCONTINUED*
GRENADILLA BLANK - SQUARE - 15" (38cm)
Fine quality Grenadilla square blanks.Approximate dimensions:1.5" x 1.5" x 15" (38mm x 38mm x 38cm)
Fine quality Grenadilla square blanks.Approximate dimensions:1.5" x 1.5" x 15" (38mm x 38mm x 38cm)
$66.40
Product SKU:
3137
*DISCONTINUED*
FILE / BURNISHER HANDLE - 4-1/2"
Hardwood Handle Smooth Polished Finish Reinforced Metal Ferrule Screw-on handle features hardene...
Hardwood Handle Smooth Polished Finish Reinforced Metal Ferrule Screw-on handle features hardened tool steel, threads allow easy installation Holds burnisher securely Fits any file or burnisher with standard 2" tang Length: 4.5"
$3.95
Product SKU:
2825
Our Lamplockers are the perfect solution for keeping leak light lamps inposition while working on...
Our Lamplockers are the perfect solution for keeping leak light lamps inposition while working on the instrument and also prevent lamps from falling outof the instrument onto the floor.Made from safe, non-marring rubber, Lamplockers areslotted to easily slip over the lamp cord and are then insert into the neckreceiver or bore of the instrument. The hole through the center of theLamplocker is large enough to allow the cord to easily slide through it forrepositioning of lamp yet provides enough...
$17.50
Product SKU:
8250
WIHA PHILLIPS HEAD SCREWDRIVERS
RECOMMENDED USE: screw type: key guard, valve, and miscellaneous screws instrument: Saxophone, ...
RECOMMENDED USE: screw type: key guard, valve, and miscellaneous screws instrument: Saxophone, brass valve sections, and general shop use Votaw Tool Company is pleased to offer the Wiha™ line of screw drivers. Blades are made of high alloy vanadium-molybdenum steel specially developed for Wiha™ and are salt-bath hardened and tempered to provide optimum hardness, maximum torque transfer and exceptional durability. Chrome plating assures protection against rust and corrosion.All Wiha™ handle...
$5.95
Product SKU:
6725
Machined from rust free 303 stainless steel Works great on sax necks, crooks, etc. Overall diame...
Machined from rust free 303 stainless steel Works great on sax necks, crooks, etc. Overall diameter: 0.5" (12.7mm) both ends taper to 0.375" (9.52mm) Overall length approximately 18" (45.7cm) Both ends threaded 3/8"-16
$48.00
Product SKU:
2304